Giving the Jazwares Halo CE Master Chief a black wash
Ойын-сауық
Adding some detail to the Jazwares Halo Combat Evolved Master Chief by giving it a black wash. What do you think?
#halo #actionfigures #collecting #thespartancollection #spartancollection #shorts #Jazwares #custom #customizing #winterupdate #343 #343industries #bungie
Пікірлер: 335
Wow! Hello everyone! Thanks for watching! Here's another custom I worked on while I work on my next video: kzread.infoiFaZkEeydIw
@orenmontgomery8250
Жыл бұрын
A little dish soap in the mix helps work like a flow aid.
@honestjakegaming
10 ай бұрын
Good job!
For larger figures like this, an oil wash would make more sense than acrylic. You get more time to work with it and it really gets into these recesses. Added a light metallic drybrush to the edges would really complete the weathered look
@SuedeTsunami
Жыл бұрын
Thanks for the tips!
@chuckymaynard96
Жыл бұрын
@@SuedeTsunami in addition, going over it with a piece of finer sandpaper in a few spots in random directions would also offer more of a sticking point to the oil. gives off a more worn look as opposed to just dirty, really comes in handy for larger figures in metal armor like this
@lemmingscanfly5
Жыл бұрын
I'm too scared to put any acrylic paint on my figures, it always chipped off of my painted Bionicle parts as a kid.
@irondolphin9387
Жыл бұрын
@@lemmingscanfly5 I’m guessing that’s because you likely didn’t add any primer, since acrylic paint doesn’t like to stick on smooth plastic at all. Trust me, I understand that pain.
He went through Blood Gulch teleporter
@stonespicher2207
Жыл бұрын
What is this black sh*t anyway?!
@nofacedgoldfish6216
Жыл бұрын
LMAO
@jetpackdog3427
4 ай бұрын
outstanding response
@veeyoooh
8 күн бұрын
“The jeep followed me back in time!”
You should buy a bunch of those and Re-paint them to look like the blood gulch crew from red vs blue
@ABFcore
Жыл бұрын
OMG YES
@ferretlord7051
Жыл бұрын
Yes
@lordandsavior6726
Жыл бұрын
This is what we need, the only thing that could improve it from there is actually having the blood gulch map
@JayPlusForerunner
Жыл бұрын
RvB was a better halo show than the halo show
@zaaknicolas7638
Жыл бұрын
exactly what i was thinking. i need to know where to get this i just finished wash i just need caboose
"Damn it, I hate this black stuff! what the hell is it?!"
@nofacedgoldfish6216
Жыл бұрын
"Tucker did it..."
@anyderrosek9272
Жыл бұрын
Hey, do you ever wonder why we are *still* here?
@Rocco049
Жыл бұрын
@@anyderrosek9272 that’s one of life’s great mysteries, isn’t it?
@caboosesms1257
Жыл бұрын
@@Rocco049Why are we here? I mean, are we the product of some cosmic coincidence, or is there really a God watching everything?
@Rocco049
Жыл бұрын
@@caboosesms1257 no, I mean why are we here on KZread, when we could be somewhere else?
Should’ve just sent him through the teleporter , tucker would approve 😅
@bandit3019
Жыл бұрын
"I'm sick of this black stuff what the fuck is it?!"
@nofacedgoldfish6216
Жыл бұрын
"OWIE! You lied to me..."
@roux6715
Жыл бұрын
10/10 comment
@teamkillingf4999
Жыл бұрын
"dammit I hate this black stuff what the hell is it?"
@zytha2890
Жыл бұрын
117 likes must not break it
As he said big green skittle I pulled out a green skittle out my bag of random skittles
Master Chief you mind telling me what you are doing on that vídeo Sir getting more drip
Big green skittle is the best possible description lol
Use shades. Citadel Nuln Iron, Army Painter Dark Tone, etc.
Try using a little less black in your wash- and when removing the excess, try a Magic Eraser instead of a paper towel. You should also try a wash of burnt umber on the boots, knees and elbows for a more "dirt" look. You can mix some flocking into the mix for the boots to get a bit of grass and organic debris on them -particularly near the soles. I think your Chief looks good- smart idea to mask the visor.
I did this with an optimus prime figure i had, i just used the Citadel Paint Nuln Oil. Works like a charm
It goes from being a dollar store figure to a Walmart figure instantly
@Osegis
Жыл бұрын
These are the same garbage ones from walmart... I doubt they'll ever be as good as the Halo Reach ones back in the day
@thehindenburg3402
Жыл бұрын
@@Osegis I miss those so much man. I remember I got a sick Jorge one as a kid.
@Argorikki
5 ай бұрын
@@Osegisi thought i was the only asking “where the hell are the reach figures”. I still have a grunt ultra from 10+ years ago that i found in a box yesterday. I also had the elite minor, emile, kat, noble 6 and even the damn warthog but those are lost. These new figures have NOTHING on the reach figures
Definitely makes it look more battle scarred than before.
You could use citadel paints nuln oil, you don't have to rub anything off
I think i have been using paint wrong ever since i was told not to lick the brush in kindergarten...
It looks like he came out of a comic!!! I love it!
I actually highly recommend letting the paint get into the visor, brings out the Line work and prevents the visor from sticking out too much. Really improved my linda!
I always love this Technique for Prop making! Especially warhammer 40,000 props, In the bizz, We call it a "Mega wash!"
1- buy figure 2-??? 3- apply black wash 4-profit
He went through the teleporter
Lol “big green skittle”
I think after wiping away the excess it looks too clean. Try using some Citadel Paints Nuln Oil, specifically old recipe in the large pot.
Halfway through the process it looks like Master Chief was fighting the ink from Bendy and the Ink Machine
See the gun see the good
10 drops of thinner to 1 drop of paint makes a nice wash. That was WAY too thick. If you make the wash thinner, you won't have to do all that wiping
@SuedeTsunami
Жыл бұрын
Thanks for the tip! Yeah, it got to be way thicker than I intended. 😅
@CNL117711
Жыл бұрын
@@SuedeTsunami honestly I've been thinking about wiping and the that seems to be the best way to add black to recesses (that I do NOT want to paint over. I've been eyeballing this space ship I have)
That’s almost flawless m8
While not similar, yet related. I do black washing for custom Gunpla kits, and one I did for recently is the (while its not a custom)"GM Spartan" which is a bit ironic for this instance. Being the the GM Spartan is green like MC
@megatron8449
4 ай бұрын
The design (for the model at least) takes a few design ques from MC.
@soksocks
4 ай бұрын
@@megatron8449 it's quite the opposite though, cause the GM Spartan is much older in design. 1989, then to 2005 with a Resin kit basically updating the blocky design of 1989. Then finally an 2022 official kit. Personally, as someone with the model, I don't really see the MC inspiration. Besides the obvious green and the Spartan naming, design not so much. Maybe the head piece? But that's about it to me, though a stretch
@megatron8449
4 ай бұрын
@@soksocks the 2022 kit, iirc, it has gold visor, though I'm probably wrong on that.
@soksocks
4 ай бұрын
@@megatron8449 it's blue. Other than that, there really isn't MC inspiration imo. Though, you most likely saw a conversion kit, custom model, and/or other GM models(GM Sniper Custom has gold). Which others can have golden visors, the standard look for the Spartan is, again, blue. Even then, GM by design is was before MC, and way before the Microsoft 1999 look. Gundam all the way in 79'
@TymeTime
4 ай бұрын
@@megatron8449not malicious, but you're wrong. The 22' GM spartan really only has a blue visor. Nothing about it correlates with Halo than by name. Regardless, Gundam as whole, which the GM's come from, are older by 2 decades. As the poster said, they pretty much go back to 79'. Which also means Bungie, if anything, would've taken inspiration from older media. Gundam perhaps is one. But we know that the 99' MC doesn't look remotely like GM's till maybe the 01' iteration. Though saying that is a reach. Also to say that Gundam took inspiration from Halo is wrong, since years don't line up right. The 05' Resin kit and the 22' model already has been derived back in 89'
That old halo music is so good
He handled that open pot like he doesn't know what Nuln Oil will do
those proportions are something else
He looks like he’s been in a good battle
I did this with mine as well the moment I got it. The sculpt is great but the paintwork left a lot to be desired. It makes a world of a difference
A coat of flat topcoat does wonders for this figure along with some light weathering
Small improvement but thats all that was needed imo. Great job man!
“little bit more like he does look in a game” and shows the same green skittle:D lol
God damn that blackwash thick!!
Ive been painting halo figs since halo 3 to have the colours i uses to use in multiplayer the amount of extra visable detail you get with a pinch of blackwash honestly is surprising
I love the Halo CE Master Chief. The simplicity is awesome. And Red VS Blue made me like the character model even more
He looks like he’s actually done something combat.
i want that figure so bad, id be so happy with it, sadly i dont have one
Definitely an improvement!
Just did a black wash "shows off a dry brushed white arm"
There was a word i was trying to figure out to call it Skittle is perfect 👍
That’s pretty cool looking
For a skittle, he looks pretty good!
I love the jazware figures, the colors come a little off/plain but the sculpts has a lot of detail, perfect for customizing
He looks like he just got done with the mission 343 guilty spark. It looks pretty cool fr
That figure looks awesome I gotta pick that up!
My favorite part of the old mega blocks figures was the blackwash.
Lol, I did something kinda similar to this. But with the Noble 6 and 5 HaloLoot Crates. They were too grey and not enough detailed. So I used a black fine sharpie to get into paint the lines in their amor.
I like adding a little bit of small scratches for the black wash to go into just for some extra detail
It gives the vibe of if Chiefs MK.V CE look was put into Reach's gritty aesthetic style. It's pretty cool.
Looks delicious
Hey! Thats pretty good
i love halo action figures
Thats mint as hell
very nice choice of background music 🎼🎵👍
Little suggestion if you’re looking for a wash try using citadel paints as they have washes where you don’t need to wipe
I'd recommend using Tamiya Panel Liner. It emphasizes depth on armor really well without tarnishing. For tarnishing there's better resources for battle wear and dirt.
Wow very cool! Love the detail you brought out.
Hit it with a gloss varnish from rattle can first so the wash can run into the recesses. You can then seal it with a matte varnish after to prevent the paint from coming off.
Oh did he go through a teleporter
I haven’t seen washes done like this before. Great job!
Agrax earthshade or nuln oil from citadel paints is a wash that gets into every crack and recess. It's reslly thin so as long as you apply a thin layer you don't have to worry about removing it
Pro tip: There's this stuff called "nuln oil" from citadel which give the same affect + the time saved on not wiping the paint of
Looks fantastic beside the chest which looks almost identical and since the wash didn't stay there it stands out alot.
Personally, id say use tamiya panel liner as its basically the same but it gets into more crevices, just make sure to always see if the plastic wont melt when it makes contact with the liner fluid
Nice! Great job 💯💖👍🏻👍🏻
I think this look great personally
It looks like someone's child painted over a figurine and they cleaned it as best as they could. It always does.
Ngl I heard the song for the video and I started to miss playing halo.
Good job!
I remember seeing this in the toy section at Target and really wanting one.
Love it!! 🙌
Not bad, i'd consider using an oil wash or thinning the wash down a bit more. If you wanted to make it pop you could drybrush certain edges with a light gray.
I loved doing washes on my Transformers. I just wish I could get it all in the line details without leaving residue elsewhere.
No he looks like he works at Jiffy Lube
Looks great! A little more dry brushing with the metallic paint would do it Justice
Big Green Skittle
That looks so cool
@SuedeTsunami
9 ай бұрын
Thanks!
I would have gone with an oil wash for a figure of this scale. A black wash is something I use on my minis.
Ehhhhh you should have used a darker green and put it directly into the recesses. Or panel lined
They put the mabster cheibf on da sobda
nah bro you gotta do an oil wash. pil washes have really good flow without staining the model. you take blacl oil paint (although you should probably mix a tiny bit of blue into it) and thin it with mineral spirits. test it on your hand and if it flowes into the crevasses on your hand it's good. slap it all over the model and wait about a day. then take a makeup brush with some mineral spirits and scrub it in a downward direction. you get really neat panel lines that are super dark while the rest of the fig is pretty neat.
You have far more patience than I do, good job
Sometimes before black washing, ill take a razor or sand paper band add scrapes and scuffs different parts of the armor, and they pop out
A good dry brush or some simple highlights would make it pop a bit more too!
Looks pretty dope! I bet some silver scattered around in the edges to mimic scraped metal would look cool! I really wanna get into doing custom figure painting on a bunch of Transformers and maybe a masterchief too! Good stuff, man! 😁👍🏻
Nice 👍
Very good!!
His files were covered in black ink Literally 😂
That is some thick wash there friend, always been a less is more type of painter, and firm believer of layering rather than wiping excess, especially for smaller minis. I gotta see how this turns out in case I am missing out on some better techniques! Keep it up.
Maybe slightly lining the panels of armor with a grey metal paint could be good.
I have this figure! im planning to turn 'em into Caboose when I have the supplies (and motivation) to do it!
@connorfindlayyt360
Жыл бұрын
I will buy it from you
You should get another one and keep the black paint on it so he looks like the halo anniversary chief
holy shit i gotta try this technique
For anyone who cares in 3d modeling you can use substance painter to texture 3d models and get the same effect he has here by using a dirt generator on a black mask ☺️
Looks a helluva look better!!
I think it should be given a slight shine to the armor to replicate how it looked in the original game.