Aside from the hilarious shame whispering in your mom's/grandma's etc basement this was absolutely awesome.

@spartan_toy_hunter

Жыл бұрын

Thanks for stopping by watching!!!

This cobra troop must be the strongest in the squad cause he stands out from the rest.I like the fact that you have more than one option for character customs.

Looking forward to seeing what's covered in this video. I purchased a couple of extra vulcans when target had them clearanced down to $7.50, since I felt the bonecrusher torso & extra hands made it a nice value for future customs; and then picked up a few more when they were still available during target's $25 off $100 toy sales.

@spartan_toy_hunter

Жыл бұрын

I'm glad you took advantage of the deals, Unfortunately I had to crack open the chest for the bonebreaker torso to use the arms I may do a separate video showing what it looks like on the inside. Thanks so much for stopping by and watching my video appreciate it!!

SUPER RAD!!! I would have never thought of that!!!

Awesome! Thank to show and get ideas for rookie custmizer!

@spartan_toy_hunter

Жыл бұрын

Thank you so much for stopping by and watching the video I hope to bring you more ideas in the future!!

Lots of potential here. Thanks for showing this, subscribed

You are a great action figure customizer! You’re a great kitbasher!

@spartan_toy_hunter

Жыл бұрын

Thank you for the kind word and for watching!!

Great work! Thank you for doing this. It totally changed up an idea have for a modernized grey ghost.

@spartan_toy_hunter

Жыл бұрын

Thank you for stopping by and checking out the video I’m glad to be of help! When you’re done with it I would love to see it!

@doublerrealcustomsreviews2524

Жыл бұрын

I started following you on IG. I'll tag you when I finish it

That was pretty cool looking

@spartan_toy_hunter

Жыл бұрын

I appreciate that thank you very much thanks for stopping by!!

Cool stuff!! Also, Tomax (Toe-Max) and Xamot (Zay-Mot) Just so ya know. :)

If you cut the leg peg off Vulcan, you can put a screw (with a head that will fit the boot you want to use) in it’s place. I did and put Blue Marvel’s boots on Vulcan’s legs.

@spartan_toy_hunter

4 ай бұрын

Thank you for the idea, thanks to Ross I'll be able to take as many chances as I like. 👍

@SethHMG

3 ай бұрын

@@spartan_toy_hunter if an all-thumbs clown like me can get it on the first try, you’ll have no problem

It would be a good Deadpool

Could work as a SHEILD agent if you had a logo for it.

Wow genius! The possibilities are endless. My tip for the red undies showing is to cut it off with exact knife, then glue blue diaper on.

Digging your kitbashing look forward to more On the twins....tomax and xamot ( pronounced saymot)

That is awesome kitbashing dude

@spartan_toy_hunter

Жыл бұрын

Much appreciated!! Thanks for stopping by. I just subbed to your channel love the stop motion videos great stuff!!

@Rambel10

Жыл бұрын

@@spartan_toy_hunter Thank you so much!!

Looks good. Could be a good kitbash base for Krake.

It has potential to be used as a base figure for a custom Fantomex Figure

This is great. This is the type of toy videos I would love to see. Just subbed.

@spartan_toy_hunter

Жыл бұрын

Thank you so much and thanks for stopping by I'm hoping to get the next video in the next week.

@eraab6459

Жыл бұрын

@@spartan_toy_hunter Sounds great!

I am a new subscriber

Can you swap out the legs of the *GI Joe classified Cobra Officer* and the *"Ant-Man and The Wasp" Ant-Man* figure?

@spartan_toy_hunter

Жыл бұрын

I don't have that figure in hand, but if it has a soft hip that connects with the socket it can be done. Most of the old marvel legends figures were build with a hard plastic in that section which made it difficult to remove without breaking that part and having to super glue it back together. I like to hear what your experience is in your attempt. Thanks for watching!

@Rambel10

Жыл бұрын

That would be cool

@mattthestormtrooper3239

Жыл бұрын

@@spartan_toy_hunter Thanks! I'm currently planning to make a MCU 838 Mr. Fantastic. Found your video and i loved it! Thanks for the in-depth review!!!

Smart part choices never would have thought of this, would love to see how it looks with the base body dyed black or maybe the whole thing dyed black actually

@spartan_toy_hunter

Жыл бұрын

If I get my hands on the new black panther With the build a figure part The classic look comic book with the movie wave that's the same body mode as this one.

@visionda1

Жыл бұрын

@@spartan_toy_hunter yeah that's a good idea.

Can you do a video kitbashing a power rangers lightning collection figure, and Marvel Legend figure.

@spartan_toy_hunter

8 ай бұрын

If it happened to find one at Marshall Ross I can make that happen interesting thanks for the idea

Really cool ,let the arm peg trimming begin .Thanks

@spartan_toy_hunter

Жыл бұрын

Thank you so much for stopping by and watching the video I'm hoping to do another tutorial on how the bone breaker arms.

For the water did you use hot straight from the tap or did you heat the water up in the microwave? Is there a certain temperature it should be?

@spartan_toy_hunter

Жыл бұрын

Sorry for the late response I boiled the water through the microwave, I don't Measure the temperature.

Do you happen to know when they switched to the soft rubbery plastic upper thigh parts on Marvel legends figures?

@spartan_toy_hunter

Жыл бұрын

As far as I know this vulcan figure is the only one, not sure if they're on any other older figures. I would have to check.

Get a set of digital calipers and a set of drill bits then measure the pegs/ peg hole of the og Joe fig then just drill a hole in the center of Vulcan’s back and boom u got a way to fit it just like the og

@spartan_toy_hunter

Жыл бұрын

I have been thinking about making some holes in his back See if I can make Angel from the X-Men.

Why are you whispering ? Dude...are you in a basement !? Hahaha

Was thinking of swapping two Joes boots what method did you use? How easy or hard would it be for a 100% novice :)

@spartan_toy_hunter

Жыл бұрын

Hair dryer will would do the trick, it is the easier of the body parts to remove and switch. Keep adding heat if it doesn't pop off the 1st attempt. Let me know how it goes!

@TheHairyGorilla

Жыл бұрын

@@spartan_toy_hunter Thanks for the reply will be a few days waiting on the extra figure, didn''t want to ruin a good one hehe.

@TheHairyGorilla

Жыл бұрын

@@spartan_toy_hunter Worked perfectly even managed to pop off the legs to get the webbing on him :) Thanks for the advice!

❤

The volume is to low or something.

Great video but man does it hurt to see you take apart Joe figures I've never been able to find here to use the parts for customs lol. No Classified figures last more than a day here.

Gotta talk closer to your Mic, or talk louder bro I cannot hear you

@TheCrimsonCretin

Жыл бұрын

But also I love watching people kitbasjing thank you for uploading this. Never stop!

@spartan_toy_hunter

Жыл бұрын

Hey man I'm practicing to be a ASMR speaker!! 😁👍🎤 Thanks for stopping by!!

What do you use for die?

@spartan_toy_hunter

4 ай бұрын

Rit DyeMore Synthetic Liquid Fiber Dye

@danieldelewis2448

4 ай бұрын

@@spartan_toy_hunter really? Is that just for black , and can you easily paint over it afterwards ?

@spartan_toy_hunter

4 ай бұрын

When I dyed my Black Widow origins, the one with the white suit, I repainted the neck I realized I had the primer that section so that the paint would stay. Every time I applied the skin tone it would the color would fade.

@danieldelewis2448

4 ай бұрын

@@spartan_toy_hunter I picked up some black, and some red Rit (the premixed liquid) dye today. I'm going to try to dye my maggot figure this afternoon. Thanks for the info

The cobra legs are a better proportion than the ML legs

@spartan_toy_hunter

Жыл бұрын

They came out better than I expected, I do have an extra croc master on my playground with that and see what I can come up with.

@Articulatedcopy

Жыл бұрын

@@spartan_toy_hunter I'm new to your channel so I'm not sure if you dabble in the painting but I will certainly stay tuned and find out

Wack

so youre just getting worse articulation with no benefits?

@Rambel10

Жыл бұрын

It looks cool

@suhtangwong

Жыл бұрын

What you mean girl?

@danielmilliken8903

Жыл бұрын

Most people don’t have the marbles to kit bash just one figure so why you bashing his? Btw I notice no reply to others asking too.. I love what he did who gives 2 flipz about that

Just show a picture of the end product that you’ve produced

That’s like when people use the term “merch” it’s so cringe just say merchandise.

I love what you did. I’m not jelly at all. New subs here 🤘🏼🤍

Your thumbnail picture makes me not want to watch the video

@spartan_toy_hunter

Жыл бұрын

Thank you for the feedback, thanks for stopping by.