Good work so far. Before you drive it anywhere, remove the rear bumper and replace the steel fuel line on the back of the tank. It WILL be rotten, and it WILL burst and piss fuel out at the most inconvenient moment.
@154RWАй бұрын
When he tucked that wheel for the first time and got excited he straight up sounded like Bane!!!
@thughes52Ай бұрын
Hey josh car is getting there looks good good choice for the rims ...am fingers crossed for you 🤞good video and hopefully car will run great ....looking forward to next video
@rasmusskinnerup7181Ай бұрын
Perfect wheel choice i must say, i had 17" carline cm6 on my E36, they look so damn good, but they sadly were too wide for the arches
@IfthemilkturnsouttobesourАй бұрын
We’ll done man the vessel is looking better by the day. I have no doubts that you’ll both be attending the festivities at Goodwood. 🤙
@aidanbarrett6981Ай бұрын
I was enjoying the progress through the vids lads, until those wheels. I was about to subscribe, until those wheels. I was even considering being a patron and flying over to meet you, until those wheels. You’ve motivated me to start my own KZread channel and call it ‘everything good that could happen to a BMW, UNTIL THOSE WHEELS!!!!’
@Joshwaa___
Ай бұрын
Thanks for the sub!
@72mardy
Ай бұрын
So you like the wheels then....
@Chilled_MackersАй бұрын
Superb video, love the dedication! Just to throw more work your way, give that rack/steering box, diff and cog-box some lovely new fluids fella - it'll save a fortune. The tree in the c-pillar must stay! 😆
@ewanturner4381Ай бұрын
Got to love a bit of Smith and Sniff!
@d.c.Jones70Ай бұрын
I am putting it down to me being really old and out of touch but those wheels are horrible. Other than that great work and a lovely survivor car.
@retsklАй бұрын
cars looking good but those maxpedo coils are going to be NASTY
@CarambeАй бұрын
Cracking job on the interior Josh 🤌🏻
@terrymolloy6997Ай бұрын
Wow! The vapour blasting is stunning
@cemoto15Ай бұрын
Hope you make it , car will look fantastic with those wheels . Good luck 😊
@RuperScooperАй бұрын
Love what you do - great channel also but those wheels are awful - Munich is twitching you just killed a nice car.
@FanaticQuattroАй бұрын
Love the video, would be good to hear how much the stuff cost as you fit it!
@the_chocolate_teapot2156Ай бұрын
Coming along nicely
@KirksAudioSanctumАй бұрын
From the sound of the engine, sounds like a fuel delivery issue...
@davidrix804Ай бұрын
Hi josh,you need a steamer to clean that mould away🫡🫡🍺🍺🇬🇧🇬🇧
@chacal184418 күн бұрын
Nice job congratulation bro peace.
@_NobodyImportantАй бұрын
That shock drop was shocking 😅
@karimmostafa7913Ай бұрын
E34 gang
@karimmostafa7913Ай бұрын
Yo can I take mine to your shop just to get an inspection and opinion?
@janaheeger5362Ай бұрын
The vapor blasted parts look awesome! How does it work? With steam??
@72mardy
Ай бұрын
Glass beads and water under high pressure
@andersn4707Ай бұрын
E34:s are so nice 😀😀😀😀
@honlu672522 күн бұрын
Can you share what the wheel offset is front and back and also what tire size you used front and back...i want the same fitment on my E34. Thanks!
@marcpegg6613Ай бұрын
sounds like not enough fuel could be fuel filter or plugs
@jus__graАй бұрын
4:48 Jesus when did Sam Hard present this channel?
@blueman46Ай бұрын
Subscribed from the Sierra, however really not impressed with dangerous tyre stretching, as well the guys that love stupid camber etc. We all love cars but your the don't care about danger/stupidity gen unfortunately. No disrespect meant as your a very skilled guy and have some amazing cars but not for me so I'm unsubscribing
@72mardy
Ай бұрын
Bye
@Joshwaa___
Ай бұрын
Hahah okay!!! no problem 😉
@sencissenpai8956Ай бұрын
Oh no, we didn't see a sill repairs🥲 wished to see that would have been very helpfull for my repair. But it's alright looks good still.🙏👍
Пікірлер: 34
Good work so far. Before you drive it anywhere, remove the rear bumper and replace the steel fuel line on the back of the tank. It WILL be rotten, and it WILL burst and piss fuel out at the most inconvenient moment.
When he tucked that wheel for the first time and got excited he straight up sounded like Bane!!!
Hey josh car is getting there looks good good choice for the rims ...am fingers crossed for you 🤞good video and hopefully car will run great ....looking forward to next video
Perfect wheel choice i must say, i had 17" carline cm6 on my E36, they look so damn good, but they sadly were too wide for the arches
We’ll done man the vessel is looking better by the day. I have no doubts that you’ll both be attending the festivities at Goodwood. 🤙
I was enjoying the progress through the vids lads, until those wheels. I was about to subscribe, until those wheels. I was even considering being a patron and flying over to meet you, until those wheels. You’ve motivated me to start my own KZread channel and call it ‘everything good that could happen to a BMW, UNTIL THOSE WHEELS!!!!’
@Joshwaa___
Ай бұрын
Thanks for the sub!
@72mardy
Ай бұрын
So you like the wheels then....
Superb video, love the dedication! Just to throw more work your way, give that rack/steering box, diff and cog-box some lovely new fluids fella - it'll save a fortune. The tree in the c-pillar must stay! 😆
Got to love a bit of Smith and Sniff!
I am putting it down to me being really old and out of touch but those wheels are horrible. Other than that great work and a lovely survivor car.
cars looking good but those maxpedo coils are going to be NASTY
Cracking job on the interior Josh 🤌🏻
Wow! The vapour blasting is stunning
Hope you make it , car will look fantastic with those wheels . Good luck 😊
Love what you do - great channel also but those wheels are awful - Munich is twitching you just killed a nice car.
Love the video, would be good to hear how much the stuff cost as you fit it!
Coming along nicely
From the sound of the engine, sounds like a fuel delivery issue...
Hi josh,you need a steamer to clean that mould away🫡🫡🍺🍺🇬🇧🇬🇧
Nice job congratulation bro peace.
That shock drop was shocking 😅
E34 gang
Yo can I take mine to your shop just to get an inspection and opinion?
The vapor blasted parts look awesome! How does it work? With steam??
@72mardy
Ай бұрын
Glass beads and water under high pressure
E34:s are so nice 😀😀😀😀
Can you share what the wheel offset is front and back and also what tire size you used front and back...i want the same fitment on my E34. Thanks!
sounds like not enough fuel could be fuel filter or plugs
4:48 Jesus when did Sam Hard present this channel?
Subscribed from the Sierra, however really not impressed with dangerous tyre stretching, as well the guys that love stupid camber etc. We all love cars but your the don't care about danger/stupidity gen unfortunately. No disrespect meant as your a very skilled guy and have some amazing cars but not for me so I'm unsubscribing
@72mardy
Ай бұрын
Bye
@Joshwaa___
Ай бұрын
Hahah okay!!! no problem 😉
Oh no, we didn't see a sill repairs🥲 wished to see that would have been very helpfull for my repair. But it's alright looks good still.🙏👍