Connecting a Split Second calibrator and setting up TunerPro to configure it.
Жүктеу.....
Пікірлер: 32
@luciankristov64362 жыл бұрын
Wouldn't it have been more exciting if he actually explained what the files are and where to start.
@L1A16 жыл бұрын
Very helpful video. Thanks for posting!
@StatusFIX3 жыл бұрын
very impressive software , i am hopeful i can work it out for my uk spec car
@Fk8td3 жыл бұрын
for a new fk8 civic type r would the new r4 software be more user friendly?
@hassanabas15493 жыл бұрын
Can I tune a Nissan maxima 2004 3.0l that comes with vq30 on stock ecu using this program?
@Splitsec3 жыл бұрын
We use TunerPro RT to program the AIC2 family of additional injector controllers. You can use it on the Nissan Maxima if you are going to modify the engine and run additional injectors. If you are looking to fine tune a lightly modified engine, one of our R4 based PSC1 products might be more appropriate.
@fireman66767
9 ай бұрын
I have an OBD1 lt1 corvette can I use tuner pro to returned my co.puter without this calibrator
@markamarandos3408
9 ай бұрын
TunerPro can be used to tune obd1 ECUs. You can use it to alter the code in the PROM in the ECU. You can also do real time tuning with an emulator.@@fireman66767
@destineal2 жыл бұрын
So this is only for AIC2 and not PSC?
@ecuperformance9593 жыл бұрын
this can work with obd2 ?
@asfsf66255 жыл бұрын
From where should i get xdf and bin..
@jurajlitvanyi5410
4 жыл бұрын
nefariousmotorsports.com/forum/ try find .xdf in this forum by entering your ECU number into search module .. if you dont know your ECU number you should connect diagnostic, there should be written this number or look on ECU if it is available to look, on the box there should be written the number of the ECU
@catmogguy3 жыл бұрын
What chance do I have using this. not a lot I would think 😂
@campuradukchanelilmutiadabatas3 жыл бұрын
how to get xdf file from honda ecu software
@creepycrawler46905 жыл бұрын
They really need to do something to make easier for us older dummies.
@MrbadatHALOslayer
4 жыл бұрын
Don't feel bad. I'm 24 and have no idea how to use this.
@averyhite188
4 жыл бұрын
I’m 17 and have no clue what he is talking about I’m pretty sure it would be easier to convert to a carburetor
@jtteo6793
4 жыл бұрын
Get the aic1 and use R4 software. Soooooo much easier
@MrbadatHALOslayer
4 жыл бұрын
@@jtteo6793 could you post a link to that?
@ebeaulieu813
4 жыл бұрын
I tried this years ago and got no place. Recently have been trying again as in finally got it installed and viewed my BIN file. Absolutely cannot get it to recognize hardware? Decides what com ports it likes not what blue tooth or usb is in devices.UGH ? Hopefully this video has enough information that I finally get it. Been using TunerCat for my OBD1 tuning but wanted to try TunerPro.
@ajlalnaseem86676 жыл бұрын
which definition file i choose for chevrolet exclusive 0.8 2005
@Splitsec
6 жыл бұрын
Use v4.4.0
@-g.k.43892 жыл бұрын
Will this work for a 1993 Buick regal 3100
@Splitsec
2 жыл бұрын
I don't have direct experience with that application, but should be able to use it for either upstream or port injection.
@alchampion3402 жыл бұрын
Is Tuner Pro apple friendly?
@Splitsec
2 жыл бұрын
TunerPro RT runs on Windows only.
@Alex-dn5hi2 жыл бұрын
What is a Calibrator
@Splitsec
2 жыл бұрын
The TunerPro RT software is used to set up our AIC2 additional injector controller. It is used to calibrate the additional fuel required in boost.
@asfsf66255 жыл бұрын
How can i contact u , do you have facebook
@Splitsec5 жыл бұрын
We have posted xdf, bin and adx files for the AIC2 at splitsec.com. You can find them under downloads. You are welcome to contact us by phone at 949-863-1359. You can also email me at mark@splitsec.com. We do have a Facebook page at facebook.com/splitsec.auto.
@jtteo67934 жыл бұрын
This is absolute crap compared to R4 software. Why would you guys go to this. R4 is stupid simple and worked flawlessly. Deff selling my aic2 and getting a 1
Пікірлер: 32
Wouldn't it have been more exciting if he actually explained what the files are and where to start.
Very helpful video. Thanks for posting!
very impressive software , i am hopeful i can work it out for my uk spec car
for a new fk8 civic type r would the new r4 software be more user friendly?
Can I tune a Nissan maxima 2004 3.0l that comes with vq30 on stock ecu using this program?
We use TunerPro RT to program the AIC2 family of additional injector controllers. You can use it on the Nissan Maxima if you are going to modify the engine and run additional injectors. If you are looking to fine tune a lightly modified engine, one of our R4 based PSC1 products might be more appropriate.
@fireman66767
9 ай бұрын
I have an OBD1 lt1 corvette can I use tuner pro to returned my co.puter without this calibrator
@markamarandos3408
9 ай бұрын
TunerPro can be used to tune obd1 ECUs. You can use it to alter the code in the PROM in the ECU. You can also do real time tuning with an emulator.@@fireman66767
So this is only for AIC2 and not PSC?
this can work with obd2 ?
From where should i get xdf and bin..
@jurajlitvanyi5410
4 жыл бұрын
nefariousmotorsports.com/forum/ try find .xdf in this forum by entering your ECU number into search module .. if you dont know your ECU number you should connect diagnostic, there should be written this number or look on ECU if it is available to look, on the box there should be written the number of the ECU
What chance do I have using this. not a lot I would think 😂
how to get xdf file from honda ecu software
They really need to do something to make easier for us older dummies.
@MrbadatHALOslayer
4 жыл бұрын
Don't feel bad. I'm 24 and have no idea how to use this.
@averyhite188
4 жыл бұрын
I’m 17 and have no clue what he is talking about I’m pretty sure it would be easier to convert to a carburetor
@jtteo6793
4 жыл бұрын
Get the aic1 and use R4 software. Soooooo much easier
@MrbadatHALOslayer
4 жыл бұрын
@@jtteo6793 could you post a link to that?
@ebeaulieu813
4 жыл бұрын
I tried this years ago and got no place. Recently have been trying again as in finally got it installed and viewed my BIN file. Absolutely cannot get it to recognize hardware? Decides what com ports it likes not what blue tooth or usb is in devices.UGH ? Hopefully this video has enough information that I finally get it. Been using TunerCat for my OBD1 tuning but wanted to try TunerPro.
which definition file i choose for chevrolet exclusive 0.8 2005
@Splitsec
6 жыл бұрын
Use v4.4.0
Will this work for a 1993 Buick regal 3100
@Splitsec
2 жыл бұрын
I don't have direct experience with that application, but should be able to use it for either upstream or port injection.
Is Tuner Pro apple friendly?
@Splitsec
2 жыл бұрын
TunerPro RT runs on Windows only.
What is a Calibrator
@Splitsec
2 жыл бұрын
The TunerPro RT software is used to set up our AIC2 additional injector controller. It is used to calibrate the additional fuel required in boost.
How can i contact u , do you have facebook
We have posted xdf, bin and adx files for the AIC2 at splitsec.com. You can find them under downloads. You are welcome to contact us by phone at 949-863-1359. You can also email me at mark@splitsec.com. We do have a Facebook page at facebook.com/splitsec.auto.
This is absolute crap compared to R4 software. Why would you guys go to this. R4 is stupid simple and worked flawlessly. Deff selling my aic2 and getting a 1