Very nice and informative video. Thanks!

Good solution. I'd personally move the power adapters to the cabinet and add a white extension cord. That way the black cords are hidden and everything seems cleaner.

@brianapel8404

3 жыл бұрын

I actually ended up putting receptacles up in the cabinet and moving all cord up there. Check it out: kzread.info/dash/bejne/qH16qqSThdnYoso.html

Hi thanks for your video! I just have some questions about your modem/router. Did you just straight plug in your nighthawk router on your modem/router from your provider or you still need to disable the router mode on your modem/router 1st?

@brianapel8404

3 жыл бұрын

Just plugged in the Nighthawk to the AT&T gateway…

@aidanr.579

2 жыл бұрын

@@brianapel8404 you should disable the WiFi on the AT&T gateway to avoid any unneeded interference and then enable IP Passthrough so that peer to peer gaming will work right.

@aidanr.579

2 жыл бұрын

@@brianapel8404 kzread.info/dash/bejne/Z62msc2TgJOocaw.html

Hey, did ATT use the same spot to run the new Fiber cable into your kitchen or did the leave the old wall plate in place and make a new wall plate next to the original?

@brianapel8404

2 жыл бұрын

They used the existing CAT5 cable I had in my house, that ran from the basement to the kitchen. The kitchen wall plate with the ethernet jack was already there.

I also got fiber installed, and on the speedtest I get 970Mb/s Is your bandwidth limited or something? (I live in Israel, so it might work differently here)

@brianapel8404

3 жыл бұрын

That was just using WiFi. Hardwired is over 900 Mb/s and close to 1Gb/s

I am curious as to what speed the Ethernet ports on the back of that att modem will pass. Have you connected them directly to your computer?

@brianapel8404

3 жыл бұрын

Yes. Around 980 Mbps.

@8ys401

2 жыл бұрын

@@brianapel8404 Make a video about it

Curious as to why you still have the Nighthawk connected? Doesn’t their gateway provide the WiFi for you? Wondering because I have a nighthawk I use for Xfinity which we just cancelled and will have AT&T fiber installed today.

@brianapel8404

Жыл бұрын

The AT&T gateway has poor range, and I later converted to a mesh system anyways

Why does your comcast say Level 3? VPN?

Very informative video, I had a question I currently want to move my modem to a different room does AT&T charge for that is there a fee?

@brianapel8404

3 жыл бұрын

Don’t know. If you have to have them run an Ethernet cable there, probably

@gzzd

2 жыл бұрын

I just talked to AT&T and they would charge $150 to move it, plus potential extra fees if it turns out to be more complicated

You should consider adding a power outlet inside the cabinet too. Not that hard.

@brianapel8404

3 жыл бұрын

I did: kzread.info/dash/bejne/qH16qqSThdnYoso.html

inside a cabinet? was airflow not a problem? i would think that would overheat.

@brianapel8404

Жыл бұрын

Nope. I was concerned too, and it did get a bit warm, but no issues

Did the location of the router mess up your signal since you put it in the cabinet?

@brianapel8404

2 жыл бұрын

Nope. It actually worked out really well because that location is almost exactly in the center of the house.

@ariefhidayat2157

Жыл бұрын

Also it will overheating with stacking and also close cabinet

When you got fiber did you had to ask for business? Or regular Residents ?

@brianapel8404

3 жыл бұрын

Nope. Just regular residential service.

@Insima

3 жыл бұрын

What’s your monthly Payment? Can you give me a idea ? I’m trying to get some for myself for my new house. But I don’t want to get over charge.

@brianapel8404

3 жыл бұрын

@@Insima I think like $60/month for 1Gbps. I got $225 in visa gift cards when I signed up.

@Insima

3 жыл бұрын

@@brianapel8404 wow ! That’s not bad at all. I’ll definitely look into fiber. Thank you so much.

@idashxr

3 жыл бұрын

@@brianapel8404 if you said you got 1gigabyte speed why was it 300mbs ? Just wondering e are having finer installed this summer and I can’t wait

if ATT supplied a router/modum, why did you add your own router??

@brianapel8404

11 ай бұрын

It did not have a strong enough signal for my liking.

I just got AT&T 1GB plan. Why does it take so long to install? They say 2-4 weeks? Is there anyway I can make it faster?

what service is this?

@brianapel8404

3 жыл бұрын

AT&T

oh boy he put router in the cabinet...that fine because the signal will went thru the walll..but it will reduce the coverage...if he went outsite i bet you signal very weak or none

@brianapel8404

Жыл бұрын

I have an Orbi mesh system, so no problems with coverage

bruh i get 2000 mbps up and download speed 😭😭

@reyganfaith6188

2 жыл бұрын

i have frontier fiber it’s 190 per month

Stacking equipment is not recommended!

The ping should be under 21

That what I said to when I switched to fiber. I Waz like holy fucking shit God lord l

Modem and router in a cabinet 😂😂😂

hey, at&t prem tech here they didnt do the best job with bringing the fiber to the ont there at the beginning. that thin white cable can easily break if bent much at all, so you really shouldn't mess with it too much. what i wouldve done was to cut into the top of the mounting bracket for the ont and run the fiber directly inside of it. then i wouldve used a small but more sturdy jumper cable to go from a bulkhead at the bottom of the ont bracket into the ont. and i wouldve just looped the slack up inside of the ont bracket. that way the fragile white cable wouldnt be at risk of being bent. if u have any questions about your service, i can help answer them for you. just wanted to let you know about that white wire coming out of that tho, because it really isnt good to be exposed like that. here's a picture of what a proper 010G (the ont on the wall there) should look like with the white cable being not visible and the small fiber jumper linking the back of the mounting bracket to the ont itself via a bulkhead img.community.ui.com/a2d808f0-b34a-4b2b-9612-5a5f89699832/answers/4f7120d9-c0fe-4fe8-9be4-5c46637816b6/ce967188-645a-4991-b6bf-d6295316b147