Glad to see another 3rd Gen will be back on the road. These are my heart

The rods are about to leave the chat

@1manshop335

3 жыл бұрын

That's an exhaust leak you here

@jaidengarcia4485

3 жыл бұрын

@@1manshop335 idk doesn’t really sound like a exaust leak sound more like loose rods but I’d never know not my car

That engine sounded like it had a rod knocking. Maybe main knock.

@briang4470

3 жыл бұрын

I think that is the sound of a cracked or leaking exhaust manifold. They will make a terrible sound when they leak and I have seen the manifolds on these cars actually break in half on the passenger side.

@mackelby1

3 жыл бұрын

@@briang4470 That entered my mind also. Could be least of his problems after seeing that floor flex.

@briang4470

3 жыл бұрын

@@mackelby1 oh yeah, that car is definently hiding some serious rot. It still could be saved though or atleast be a good parts car. These 3rd gens are getting hard to come by.

@arthursmith5409

3 жыл бұрын

No, that's a straight up exhaust leak. And not a cam, either, like Moto said... A knock would of been heavy tick tock, fast pitched.

@dingusgarage7398

3 жыл бұрын

Lifter Rick I bet 😂

Coming from a guy with a small block, it's not rod knock, it's a nasty exhaust leak, definitely change the oil though, the longer it sits the more it breaks down, and put some premium gas with some Lucas fuel cleaner in it and run a tank through, it'll make a world of difference

personally id change the oil and fluids and plugs to makes sure she's runing at top notch

@Crazyarnold12

3 жыл бұрын

Exactly you always want to change any fluids

@jagg5474

3 жыл бұрын

I agree but that thing will never run top notch

@SteezyGarcia

3 жыл бұрын

A new fuel filter would help too.

@melissadunagan6596

2 жыл бұрын

And a new fuel filter.

That's my dream car! I wish I could find one just like that to restore.

Its fantastic to see you getting a camaro to work on! your videos are actually what inspired me to buy my first project car, which is a 1983 z28 camaro. Theres a lot of work left to go, and its almost ironic to see you working on a camaro as well. Thank you for getting me into cars!

I have an announcement to make.... I drove on freeway first time did good😂

@carloscostello-messinger5510

3 жыл бұрын

Congratulations my good sir

@dynamitesmasher777

3 жыл бұрын

Congrats bro

3rd Gen Camaros are one of my favorites

In Germany, had a Master Sergeant, he had one of these. An RS but not under the hood! It was an Autobahn runner, made to run the Lamborghinis and big Mercedes. He open that hood, it was double Mint. All out.

I just bought a 89 third gen as my first car

@tybarrington3995

3 жыл бұрын

So

@camaroant2700

3 жыл бұрын

@@tybarrington3995 because it’s relevant to this video 🤦‍♂️

Get that thing on a lift and look at the undercarriage and see how bad the rust is.

@briang4470

3 жыл бұрын

They really should because this a unibody car and if the floor is totally rotten then they car is very unsafe to drive and will crumple up really bad if crashed.

@chickensfloat7427

3 жыл бұрын

Its not that rusted. Its fine

@briang4470

3 жыл бұрын

On a unibody car the floors are super important they need to pull up that carpet and take a look because they may need to do floor pans on it asap. Even if the rockers and quarters are good, if the floor is shot that will greatly weaken that car and make it unsafe. And if they cant change the floor sheetmetal themselves then they will need to find someone to fix it or find a different project.

You should try to get a 91 with a manual they’re so good

@ileene666

Жыл бұрын

Just got a 91 z28

I bought mine stuck. I pulled the plugs and put Marvel Mystery oil down them. Waited a day, pulled the intake and put Marvel down and waited another day. I was able to turn it after that. Drained the oil and found a lot of water. Decided to rebuild the motor. Machined and dipped the whole thing. One head was cracked between the middle cylinders 4 and 6. Car runs great now. It had sat 17 years when I bought it.

Definetly get new relays to be in the safe side. Sounds like a manifold leak on the exhaust. Change all the fluids (oil, trans, ps, etc) Bleed the brakes Run a couple tanks of fresh gas thru it and start driving it

Ceep up the hard work

I think it’s time you lube up them door hinges on the s10 it’s been squeaking for quite some time now lol

I guess a chevelle is next

I had a 86 z-28 like that they a lot fun to drive

God damn I love those cars, I had an 87 iroc z a couple years ago and crashed it :( I’ve been wanting another ever since

Great car

Cool my dad just bought a 1989 Chevy comaro it’s his dream car and it’s rust free

You should finish one project but I like projects so you do you

I will bet the floors are rusted out

@jonhawkins6099

3 жыл бұрын

yeah that is one thing to watch out for my dad bought an iroc sight unseen and the floor boards were so bad he sold the car because it wasn't worth it

My dad has the exact same but red interior but someone crashed it so now it’s just sitting in my backyard

Keep it i daily mine love it

Love the bloodstains on the hood😍😂

I like watching your videos but I wish you would finish a build all the way thru instead of jumping around so much

Your pops has a SCAG great mower

Let's Get It

NO WAYY right after I get my 88 white iroc my favorite car KZread also makes a video on a white third gen couldn’t be happier

Changing the plugs would make it a whole new machine

It's got a nasty exhaust leak.

Change the fuel filter. And it's a throttle body carb. Look in the top and make sure both injectors are squirting.

@Joesmusclecargarage

2 жыл бұрын

A “throttle body carb”? Try again. It’s one or the other

@sweettee3647

2 жыл бұрын

@@Joesmusclecargarage they use to put 2 injectors in top of the carb. Which made it a throttle body. Lol you no what I meant. Now a throttle body don't have the injectors build in. They are separated.

Last time i saw one of your videos you had got your first truck and was fixing the shed in the backyard

Early gang😈

Bruh i got a 91 firebird that i got running after it sat for 12 years, just a future reference it is a pain in the arse to change the fuel pump

@briang4470

3 жыл бұрын

Yep these fuel pumps suck to change, there is only 2 ways to do it also, the hack way of cutting a hole in the floor or pulling the rear end out and dropping the tank.

Personally I’d change all the fluids put some berrymans b12 Chem tool in it to clean the fuel system then put it on jack stands and check over everything

You should use carb and choke cleaner to start engines instead of starting fluid it works the same just isn't hard on the engine.

Throw some sea foam in her clean the motor out

@chickensfloat7427

3 жыл бұрын

Need new gas, plugs rotor cap and wires would help.

What happened to that project boat

Moto migs what happened no more videos?

So what happened to the fire truck

Yessir

ayeee

Where are you located at? There seems to be more rust/ corrosion in your area.

Is it throttle body injection

Sound like its got a cam? Thats an exhaust leak my freind and its running like trash. Plenty of potential though

You need to forget the firetruck project and put you time and money in the cars how practical is a firetruck If you can't drive it on the road? Whatever you do i belive you will make the right choice.

Dude. Negative cable goes on last and comes of first. Coild be bye bye alternator

The pete davidson we have at home

Hey man how are you doing? We all miss you hope your doing good

Make a part 2 plzzz !!!!!

I don’t understand why you took tryed to loosen the bolt on the pulley. All u needed was a half inch breaker bar on the actual tensioner to take the spring tension off and u would of had the belt off without breaking any bolts. Also that motor either has absolutely no exhaust gaskets or it’s got a rod nok

vasily builds and moto migs should have a collab!!!

@dynamitesmasher777

3 жыл бұрын

Yes

Honestly I wouldn't put any money into it. That thing Is going to need a whole floor pan better off buying a good body and swap parts. That thing is unsafe to be on roads

Haven’t posted in a while I hope he’s doing alright. I miss seeing his go kart and dirtbike videos

Please paint the inside frame engine bay and outside of the corvette

Make sure that car is taking care of never sell it

That was way too much starter fluid. Thats why the flash back

Why haven’t u been posting

Where is he

500th like

You need to find that exhaust leak

Hey put some fuel stabalizer in there

Omg I just got a 89

I think she’s a junker 🤣😂

@chickensfloat7427

3 жыл бұрын

Shes not that bad. Not too good either lol. Love it though

you should put a good motor in it

Hi

Check the fuel pump

All the internet mechanics 🤣

@chickensfloat7427

3 жыл бұрын

Ikr so many

@chickensfloat7427

3 жыл бұрын

People calling a nasty exhaust leak a cam and a rod knock

Where are you come back

Hilo

U do know if u use starter fluid too much the engine will get addicted to it and sometimes not want to start without it

That engine does not sound great at all 😕

@briang4470

3 жыл бұрын

Leaking exhaust manifolds and sounds like it needs a good tune up.

Why haven't u uploaded sir

Take the flow masters out of that v6

@seanschaller4353

3 жыл бұрын

What V6?

@engineguyrojo6893

3 жыл бұрын

@@seanschaller4353 the s 10

Well Camaros have been around my family for a little bit in the past my brother had in 86 IROC Z and 85 and in 92 the 92 which I bought oh, I also currently have a 74 second generation that doesn't sound like a cam that sounds like the lifters are shot, LOL and why were you trying to take off the tensioner pulley? To remove the belt you use a breaker bar inserted into that little square hole remove the pulley hey, don't take the pulley off, you Noobs! That poor thing so Rusty and crusty oh, good luck let me know if you need any parts I might have a few extras left laying around the garage. I don't remember what LOL

HI

Car is not knocking . Sounds like manifold gasket or flange gasket

Motor time

Dont use wd40 use marvel mystery oil

It sounds like there is water in the gas

You don't put WD40 down the cylinders

Big dreams. That camaro is too far gone.

Try putting gas in the carb

@briang4470

3 жыл бұрын

It doesnt have a carburetor it has what is called TBI which stands for throttle body injection. I was one of gm early electronic fuel injection sysytems.

Getting famous off comments day 179, hope everyone has a wonderful day and hope you accomplish what you want to accomplish🤙🚀🤙

Why hasn’t he posted in like 5 months ,?

@aaronbraga7079

3 жыл бұрын

wondering the same thing

Less starting fluid

Using that much starting fluid is idiotic you were literally drenching it no wonder why it caught fire.

DO NOT USE STARTER FLUID IT WILL DEPEND ON IT TO START AND GET ADDICTED TO IT

That thing is junk

@crabtreemedia8169

3 жыл бұрын

Shut up dude

@chickensfloat7427

3 жыл бұрын

So what? Whats your point? Yes its junk. But its pretty damn cool. Has plenty potential

@chickensfloat7427

3 жыл бұрын

Deffinetly this guys isnt a car person. Not a real one anyway

@briang4470

3 жыл бұрын

It's not completely junk because even if the car is too rotted out, there is still alot of good parts there and these 3rd gen Camaro are getting hard to come by and people are always looking for parts cars.

@chickensfloat7427

3 жыл бұрын

@@briang4470 its really only floor pans. I msure it rusty but do a shity paint job on it and just have fun with her. People always expect a progect car needs to be perfect but somtimes good enough is good enough

She dont sound healthy