No video
Get an extra HDMI out on the ATEM mini! Webcam USB to HDMI converter trick!
The ATEM mini needs more outputs. Using a webcam USB to HDMI converter, you can get an additional HDMI port on your Blackmagic switcher.
Osbot Webcam to HDMI Converter
www.amazon.com...
To learn more about The Fundamentals of Live production, visit pavement.media/
To watch a free lesson, visit www.pavement.m...
00:00 Introduction
00:42 Assigning Outputs
01:27 USB-C Webcam Always Outputs Program
02:06 Why You Need At Least 3 Outputs
02:51 USB-C Functions
03:21 ATEM Streaming Bridge
04:17 Webcam to Laptop to HDMI
04:40 Intro to Osbot USB to HDMI
05:01 Osbot Demo
05:28 Measuring Osbot Delay
06:39 Benefits of 3 Outputs
07:21 Osbot Drawbacks
07:45 Fundamentals of Live Production
Пікірлер: 46
This is even more important for an ATEM Mini Pro that only has 1 HDMI out. (May want to update the video title to clarify this is about HDMI Out)
Thanks for testing out the delay of this box, every other video I saw just showed what it does but didn't measure the important delay...
Great! with the 9.5 uptade we can route the USB output...
if it sends 1080p60… how does the video looks? is it choppy? how is the conversion made? if it doesnt look choppy with dubling the frames than its a great solution!
It would be great if the Osbot has a web cam out other than just the HDMI. For my case, most of my jobs require web cam out to Zoom or KZread. Hence I use the laptop screen as my program view.
New update with ATEM Switcher Software 9.5. You can choose what to output via the webcam!
@pavementdotmedia
2 ай бұрын
Did you successfully install 9.5? Mine has failed 4 times today
@titusking-coloradorealtor
2 ай бұрын
@@pavementdotmedia I had no problems on an ATEM Mini Extreme ISO. I'll be doing our SDI Extreme ISO this evening.
Great video. Thanks. Do you think this can be used to connect the Atem Mini to monitor/tv using webcam out on the Atem Mini?
This would work great for the Osee Gostream 😁
I have an ATEM Mini Pro ISO which has 1x HDMI output and 1x USB-C output. This is a HUGE design flaw imo because the whole selling point of this device is the recording functionality. So I can stream from the HDMI output (using a capture card), record off the USB-C but then I have no monitor output. I can stream from the USB-C, monitor from the HDMI output, but then I lose recording capability. One more HDMI output or USB-C would fix this and its maddening that the give you these features but limit your ability to use them all at the same time. There is also the ethernet output and supposedly you can use the Streaming Bridge to convert the IP signal to HDMI output but that's an additional $200-300 for what is essentially a single video output. Is there a cheaper more sensible solution?
@malikplayz4425
7 ай бұрын
Did you find a cheaper solution?
@BeachChapelLive
Ай бұрын
Have you already tried using an HDMI splitter?
@pavementdotmedia
Ай бұрын
The new 9.5 software allows routing of the usb port signal to be something other than program. If you choose to use that as your multiview, you can use the HDMI for program and gain another output
I have the atem mini pro and I need an extra program out. I'm currently using usbc port as a webcam for my computer to stream on zoom. If I use the USBC port as an extra HDMI out how would I then use my camera for zoom without a webcam.
Saludos, una consulta amigo. Tiene la posibilidad de hacer alguna prueba para salir desde OBS en el computador y así saber que tiene mas latencia si verlo por el preview de OBS de un computador viejo o es mejor ese aparato?
You mentioned using that converter with the Ethernet cable... I have an Atem mini plugged into a router and I really need to see the program from a computer in another location. Without a computer at the filming location how can I do this?
How many hours of courses are already in your Live Time Package today?
Hi, can you still remote the ATEM by Network when using the USB-C Out to OBSBOT/HDMI?
@pavementdotmedia
8 ай бұрын
That shouldn’t interfere with network access
Hola, se puede configurar un tercer multiview al atem 2 e/m ?, Muchas gracias
@pavementdotmedia
Жыл бұрын
No this will not work for that. The Constellation 2 M/E only has 2 multiviewers, but can have either of those assigned to any of the 12 x 3G outputs.
@arielmartina69
Жыл бұрын
@@pavementdotmedia gracias por la respuesta, abrazo grande
@arielmartina69
11 ай бұрын
Te hago otra consulta, cómo configurar multiView atem Blackmagic desing 2 e/m, tengo 10 ventanas y necesito poner 16, muchas gracias
Is there a similar option to incorporate IP cameras as an an HDMI input source?
@pavementdotmedia
Жыл бұрын
Yes. This will do that as well. It turns a usb webcam into a HDMI signal. You could definitely use it to turn an IP camera into a traditional HDMI source
@joshuacarroll7310
Жыл бұрын
@@pavementdotmedia But an RTSP source is traditionally over Wifi or Ethernet; let's assume ethernet for simplicity. So how could you go from RTSP over ethernet to HDMI? Raspberry Pi + FFMpeg is the best idea I've come up with. Do you know of a better solution?
I have tried this all day. I have the extreme just like you but it is not showing video. The obsbot logo comes on for a split sec and then a black screen
@pavementdotmedia
9 ай бұрын
That sounds really frustrating. It seems like you’re doing things right. It’s plug and play - can you return for a replacement?
@Iamalvingeorges
9 ай бұрын
Thanks for the reply. I figured I got a defect. Ordered another one. The crazy thing is it works on my atem mini… but not the extreme.
@nodencrantz
7 ай бұрын
im having the same problem, did you ever get yours to work?
@Iamalvingeorges
7 ай бұрын
@@nodencrantz no. I called black magic and they said this will not work with my he extreme iso because the usbc port has two functions (external recording & webcam) so when you use the osbot it doesn’t know to output video. Rep said he would give it to their developing team and we may see it fixed in future updates.
@KyleGilbertDesign
5 ай бұрын
@@Iamalvingeorges Dealing with the same issue here. Was excited about this being a nice solution for my ATEM Mini Pro. 😩
How did you mount your camera above your head?
@pavementdotmedia
Жыл бұрын
A few C stands and a pipe which I clamped to the camera cage. It was stable, but took some work to make it secure
OK, now I have smoke coming out of my ears. Where are you getting the webcam source from?
@pavementdotmedia
Жыл бұрын
The usb ports automatically act as webcam outs on the ATEM mini’s
@daylight5500
Жыл бұрын
@@pavementdotmedia Got it, thanks.
@fredicoulin4654
11 ай бұрын
Maybe you can help me as well there, out of the ATEM (mini extreme) into the obsbot, power supply (12W), on the other side HDMI to the beamer: no signal :( what am I not seeing there? Thanks a lot in advance
@fredicoulin4654
11 ай бұрын
@pavementdotmedia
Thats not an ATEM mini.
That's not an ATEM Mini,
@pavementdotmedia
Жыл бұрын
It should work the same on any ATEM mini model with USB webcam