Im not an expert drone builder. But this video may help other new flyers or new to this drone getting started!

Thanks so much! I built this drone, and couldn't have figured it out myself. There were no other videos building/repairing this exact quad.

@skysportaerials

Ай бұрын

Great to hear! I love flying this drone, once you get the building part down, repairs will be much easier. Heres a recent video i made with this drone, kzread.info/dash/bejne/ip6a0JOMnLTMic4.html

I am going through this same thing :-D Thanks for the video

@skysportaerials

Ай бұрын

Glad it was helpful! We i made this video I couldn't find any video's or guides to help me.

@MikeCarr07

Ай бұрын

@@skysportaerials Unfortunately I think I received a bad ESC/AIO on mine, it fell out of the sky and I did a rebuild, flew it again...same thing...fell out of the sky. Luckily I was over soft grass this time

@skysportaerials

Ай бұрын

have you had a successful flight?

@MikeCarr07

Ай бұрын

@@skysportaerials nope kzread.info/dash/bejne/p3p2sNqmYMuvlMY.html. I think bad esc/aio

@skysportaerials

Ай бұрын

theres a great group on reddit r/fpv, i would post there, thats my go to when i run into issues, im no expert on dx issues...

Part 2 video published, kzread.info/dash/bejne/equL1sOjm7quidI.html

Thanks for the video friend. I just received mine a few days ago and this was very helpful. Could you please post a link of those Avata front guards? I bought one but they appear in the image so I had to remove them.

@skysportaerials

2 ай бұрын

Yeah, these are the ones i purchased, www.amazon.com/gp/product/B0C1SHDTH2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

@edumartin6322

2 ай бұрын

Thanks a lot !!!

I just broke my cinelog 35 V2 frame today. I just finished dismantling it and I'm stuck at the same point as you. I just can't remove the power chords without cutting them or cutting the broken frame. I gonna have to buy a soldering machine. I hope you'll make an other video to show us how you do it.

@skysportaerials

4 ай бұрын

sorry to hear that, seems to be happening a lot with this model. Did you break a prop arm? I have the video filmed but working on voice-over still. I ended up trying several methods for the power connector and it definitely did not go the way I wanted to. In the end i ended up cutting them and splicing together, the video will show how i came to that decision. let me know how your repair goes!

@Cidro42

4 ай бұрын

@@skysportaerials Yes, the prop arm broke, it was already fragilized from a previous crash so I was expecting it to happen. I ordered a new frame and duct from aliexpress, it shoud arrive in ten days. I'll see how you do it in your new vid. I orded a new XT60EW-M 14 Cable as well, so I'll be able to splice it. Thank you for your support. I'll let you know how it goes.

@skysportaerials

4 ай бұрын

im curious on the parts from aliexpress, let me know if they are similar to the OEM ones

@skysportaerials

4 ай бұрын

video published, hope it helps! kzread.info/dash/bejne/equL1sOjm7quidI.html

@madskillsgaming4745

2 күн бұрын

Mine broke same spot on the front left arm, I didn't want to un solder my xt60 connector ether, so I just cut my old frame and bolted the xt60 connector under instead of through

Does anyone know what screws length is needed for the props?

@skysportaerials

2 ай бұрын

M2*6mm Screw

@dand.1941

2 ай бұрын

@@skysportaerials thank you bro

@skysportaerials

2 ай бұрын

no worries