Hi guys! A great relief for those of us who had Gen 1 portals, is that you have commercialized a conversion kit. That was a good move for us as customers. And I understand perfectly the process of continuous improvement in your products! Continue with the great job!

I would appreciate if y’all posted a maintenance video. How often, what parts we need, etc.

Wow, really beefed up those output shafts. I broke a few and Superatv stood by their warranty and replaced at no cost. I like that you guys are continuing to innovate!

@SuperATVMedia

6 жыл бұрын

They are beefed up for sure. #ConstantProgression

Have you had any issues with the teryx 6" lift and portals. The tie rods?

Is it possible to have a kit to shorten the axles when putting on portals to minimize the overall width increase on your vehicle?

But did you pressurized it and leave it at full oil level with the 30 psi not just air

Do you, or do you know someone that makes them for a Cub Cadet Challenger 550? Or know of ones that our interchangable?

Quick question. I just had dealer change my portal fluid and some other stuff. Now rear passenger side is leaking. Looks like its from the side, bottom and behind bracket. Anything I can do until I drop it back off next week? Thx

@danpmatz

5 жыл бұрын

It's usually behind one of the bolts I don't know what all you had to do to them but some parts have been upgraded with new torque specs

When are yall going to make portals for Honda Foreman Rubicons

Would y'all ever consider making portals for the new style Honda Rubicons

@SuperATVMedia

6 жыл бұрын

If there is enough demand for them we might.

@jasond1245

6 жыл бұрын

Yeah I would buy a 3 inch version for my 500 Rubicon

@sosababy6307

5 жыл бұрын

SuperATVMedia please make them

It sure would be nice if they would offer a upgraded kit for the people like me that just bought 6" portals

Why are there no portals for 2007 - 2012 gen 1 can am renegades

Is there a Gen 2 portal system for a 2017 Arctic Cat Prowler HDX 700 Crew Cab?

@SuperATVMedia

6 жыл бұрын

We currently do not have one that will fit that particular machine.

If you think about an outboard Motor there’s no vent and it’s under water and I turn way more rpms with my mercury

@masonstansberry2625

5 жыл бұрын

To be fair, the water acts as a cool and flowing around the gearbox

What is the castle nut size? I need to buy a socket before the portals show up in the mail next week.

@Orion801airsoft

5 жыл бұрын

It's a 41mm and the kit comes with it.

Make portals for honda foreman rubicons and yall should try to make some for straight axle honda’s because that would be the only way to lift the suspension on a straight axle bike

I wonder if the 50 inch high clearance arms /axles would fit on my RZR 4 for so I could bolt on some Gen 2 portals and stay under the 60 inch requirement that Maine enforcing

@SuperATVMedia

6 жыл бұрын

50" RZR a-arms and axles will not work on your machine due to the axle splines being different.

@juanvilla4591

6 жыл бұрын

SuperATVMedia why are my first gen portals brakes so bad and l only barley mud ride with them and they are still pathetic so now imange if l lived mud riding...

@SuperATVMedia

6 жыл бұрын

Give us a call at 855-743-3427 and we'll see what we can do.

How about making some portals for a Renli 1500. These Renlis are a beast. 125 Ft-lbs torque at 3,000 RPMs and not 6,500 RPMs like the Can Am or the Razor.

Can we get the 6" portal with the 30% gear reduction vs the 45?

@SuperATVMedia

6 жыл бұрын

Not currently but that is something we are working on to offer gear reduction options.

@MrJacobphillips

5 жыл бұрын

I would appreciate this as well

Do you guys offer anything for cfmoto

Need a gimbal or what ever for the camera get rid of some of this shaking

Would Polaris Ranger portals fix on sportsman highlifter 850

@SuperATVMedia

4 жыл бұрын

No, the mounting plates are different.

What about portals for a brute force 750?

@SuperATVMedia

6 жыл бұрын

We do not yet offer them from the brute force models.

@Hondarider35

6 жыл бұрын

I have seen on the brute force pages. There is a big call for them. You would sell a bunch because a regular 6” lift is like 4200$. So if you could do 6” portals they would sell.

@Hondarider35

6 жыл бұрын

Look on the brute force Facebook pages. Ask about interest.

Man did the camera person have Parkinson's disease

You guys make the best products. PERIOD!!!!!!! You do the best R & D and you run your customer service better than everyone else too. I say I understand the buying gen 1 then seeing gen 2. But to get mad because you improved and made the product better is ridiculous. You made them better!!!!!! YOU ARE TRYING TO MAKE RIDING MORE FUN AND ALLOWING THE GUYS TO DO MORE WITH THEIR MACHINES. No you can't turn in Gen 1 for Gen 2. Anyone that asks that question is a bone head. Get 1 portals are not a bad product its just Get 2 is that much better.

@SuperATVMedia

6 жыл бұрын

Thanks for you comment Eddy. We do strive to make the best product on the market all though sometimes improvements are necessary to make the product even better!

Now yours are close to being as heavy duty as SXS Gear portals, but still not as good.