I hate mixing, testing and cleaning up. If I have a small job, I order the gel coat spray cans from dolphinite. They'll mix custom orders from a paint chip or swatch. I heard they had some problems in the past, but my experience was recent, and no problems for me.

other gel coat guns use a 4 to 6 mm spray nozzle. The HGP gun says comes with 1.8 & 2.0. Does the pressure on the pot lower the size of the orifice required ? Does is have a better atomization pattern than other dump guns ?

El gelcoat es puro o lo ligastes con acetona?

what psi are you spraying the gel coat?

Is possible to put gelcoat in a surface epoxy

You did not use a hardner ?

Can anybody tell me what is the name of the cart where he unroll the paper to isolate the painting area ? Where can i find it to buy or do by myself ?

@stuartkent383

6 жыл бұрын

www.starchem.co.uk/products/masking.htm Ive used this one: www.todayshomeowner.com/video/combination-painters-tape-and-masking-film-dispenser/ Its ok, but has a slight head ache factor.

And use your 3M work cart ,,,,,

Que referencia es esa pistola,cuánto cuesta,es urgente gracias

Sooo, is this made by 3M perhaps? Im not sure, dont think they mentioned it enough times. Can we have a 3M count?

@Loompius

2 жыл бұрын

I love 3m but wowwwww. Pump the brakes Bois.

can Gel Coat be used on pontoon boat's wooded deck?

@deltabravo5719

3 жыл бұрын

yes, likely will unbond itself over time... likely will crack from the flexing... but certainly it can be used on wood.

Can anybody tell me if they’ve ever sprayed gel coat, if so is it normal for it to orange peel? Is it just because the nature of gel coat to get that way or I’m not adjusting the spray gun well? I have a Fuji HVLP T75g & 3M PPS. This gel coat I sprayed is really thin, not like typical thick gel coat, sold by Lilly Ram

@bomberman659

3 жыл бұрын

How many coats are you putting on? Normally 3rd coat is when orange peeling effect occurs but you will probably need at least 3 coats anyway depending on the projects you’re working on. Hope this helps

@hullhealersboatworksrestor4377

2 жыл бұрын

Yes it will peel. If it’s not orange peeling your doing it wrong. If you use Duratech High Gloss Additive to thin the gelcoat you will find you get little to no peel. Although, it’s quite expensive! NEVER EVER EVER use Acetone to thin, or styrene or MEK (not MEKP, that’s hardener). Only use patch aids like duratech, fast patch any spectrum or polynt patch booster. Good luck!

I'm ready, all I need now, is a Boat..

Harbor freights $15.00 spray gun works just as well, but soon they will probably be know longer available, if you catch my drift. Made in America

How much hardener is to be used?

@AntonioHernandez-bv4wn

7 жыл бұрын

Antjan46 what you use to reducer gelcoat?

@hullhealersboatworksrestor4377

2 жыл бұрын

2% by volume is recommended. But you can catalyze from 1-4% depending on temperature and color of gelcoat. Darker color’s require up to 4% MEKP.

experts by the score.

g100 dump gun better system

Why remove the filter?

@hullhealersboatworksrestor4377

2 жыл бұрын

Gelcoat is to thick so it will become a blockage.

how many time does he say 3M................................

@HeiDrug

7 жыл бұрын

many :)

@colefloyd196

7 жыл бұрын

thames Ranger it's by 3m

@ubbeus

6 жыл бұрын

I counted thirteen.

@robbysteele

6 жыл бұрын

no idea. i stopped at 1:25

G100-6 seems more versatile with less disposable components

@elmeradams8781

3 жыл бұрын

The disposable parts are the genius of the system. Once you're done throw it away saves time, headache, and every time you use it, it works like brand new (because it is new).

How gelcoat thin?

@TN-kd8ju

4 жыл бұрын

Yes

@TN-kd8ju

4 жыл бұрын

Yes

That plastic gun is a joke

@elmeradams8781

3 жыл бұрын

It's kick butt, I have the normal accu spray. Such a time saver, and sprays primer like a champ.

This is a completely mislabeled video.

tous du plastique , encore un pot de yaourt avec une date de péremption , grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr