tacticaledge.com.au/?ref=vlvmn0q9t4 discount code "lowguido"

@atomthegreat541

2 жыл бұрын

yo where do I go get all these internal parts though that's the problem where do I get these at cuz I can do all that right now bro after watching this video you're such a great teacher

@earthenscience

Жыл бұрын

I do not understand what is the point of swapping the nylon for an aluminum barrel. Nylon is supposed to be low friction. Can you provide any scientific reason for using an aluminum barrel?

@evansnash09

11 ай бұрын

@@earthenscienceI would presume it would be more accurate being as straight as it is.

@eli_barajas

11 ай бұрын

Could you do an upgrade to the Mr. Beast gel blaster so it could shoot out steel bbs instead? I need your help with this project so I know what I need to buy for this upgrade.

@theartofflying3108

8 ай бұрын

hi mate. what is pushing the gel balls into the barrel T-pipe? Any suction force or spring? Do those go there one by one or in some series with each piston movement inside the barrel cylinder?

"It would be great if I could hurt my friends just a little bit more..." - This may be my favorite quote of all time.

@anthonyverde4549

4 жыл бұрын

I have done all the upgrades to my m4 a1 version 8 and it is putting out 290/310 fps all day long with the 11.1volt battery . O ring.1,3 Spring. motor the list goes on excellent product

@sovietalt7489

3 жыл бұрын

@@anthonyverde4549 how much did it cost you to get to 310 FPS with upgrades?

"if you dont know what that means dont worry, nobody does. it's just some sort of pixie number everyone wants to be bigger" instant sub

@lowguidoschopshop

5 жыл бұрын

I'm still getting a kick out of the amount of comments I get telling me that it's feet per second.

@therandombull7200

2 жыл бұрын

@@lowguidoschopshop feet per second? nah its frames per second

Amazing difference on compression with the o-ring change. Stunning.

@niviacuellar7879

Жыл бұрын

Npc

@GideonRE3

Жыл бұрын

@@niviacuellar7879 bro is really comment shit on a 4 year old comment what a fuckin loser and your name is nivia💀💀💀💀💀💀🤓🤓🤓🤓

Keep in mind, plastic gear box will not hold out for long, you're gonna break your gearbox...the max spring load is 1.2 for plastic, for nylon 1.3-1.4, and metal depend on its material, for cast iron it can take up to 1.5, but stainless steel will go up till 1.8 spring...

@ahmadaidheiel4107

Ай бұрын

When you mentioned plastic gear box, do you mean the cover or the gear ? Or change the whole things (gear, cover, plunger & etc..) ?

This was the very first video that got me on my gel blaster upgrading journey, thank you Low Guido, from the bottom of my heart, thank you man.

I think you had a little bit to much fun while “testing” the plunger 😂

@user-ip1hs6ki7x

3 жыл бұрын

Loose as a goose

@swiftyllamaboi8435

2 жыл бұрын

Thought the same thing😂💀

@marvinlacuintv7042

2 жыл бұрын

@@swiftyllamaboi8435 LOL 😆🤞

@marvinlacuintv7042

2 жыл бұрын

😑👏😆😂

@The_Mythical_Potato

2 жыл бұрын

penatration ( ͡° ͜ʖ ͡°)

the Balistic fps is directly related to the velocity of the ball. the lighter the ball for a given fps the less distance it will travel and the less impact for any given distance.

Thank you for your crystal clear explanation. Following your directions step to step is really working and really nice.

Great basic guide. Subbed immediately. Thanks bud, this is exactly what I needed to know, awesome work.

i think cylider volume is also a important factor contribute to a better blaster. For example, i just made my own gorkey mp5 a week before. At the beginning, i used the full-volume cylider that j8 gearbox comes with. I shot it with hop up attatched at 7m and the circle of the gel landed was approxiamtely 20cm(h) by 15cm(w). Then i switched to 75% and cut few teeth of the that compression thingy (sry i donno what its called) to make it like 60% of the original volume. After that, danm the spread was way much better and it definitely went to below 10cm by 10cm at 7m

@lowguidoschopshop

5 жыл бұрын

That sort of thing is a bit beyond beginners mods.

This looks suspiciously like an airsoft.. Is the gel thing the only legal way of playing Down Under?

@genpit6492

5 жыл бұрын

Sebastian Fick yea basically

@ozgelsoft75

5 жыл бұрын

@@alexandert5960 why not at least your not from my neck of the woods VIC. The laws here are fuckn ouss weak. pretty much if it's mad fun or entertaining.......then we're making it illegal. Coz no one's allowed to have fun here lol.... But it I still got my hands on a couple of jinmings finest lol

@ZedEff420

5 жыл бұрын

no, you can cheekily get airsoft guns too aus, i have a few from low price/fps to high grade/high fps.. and once you have them upgrade parts are a piece of piss to order hey.. qulity BB's i find are not so easy to find but there are good ones available if you use same process mentioned below (25bucks for 2000pcs 0.20gm-0.25gm-0.28gm 6mm hard bbs is what i use and search for) just have to know where and how to do so.. i use ebay by finding what pistols/AR's i want google it look for ebay link, then if it ships worldwide and doesnt come up with BS biosecurity warning.. i order it. but can only get a few styles/brands from Korea and japan (japan has best brand IMO which is Tokyo Marui super affordable and high quality m8) ALSO on when on payment screen where you can add a message to seller b4 ordering ask for the CUSTOMS ITEM DESCRIPTION TO BE TOY AND TOY ONLY... most sellers kindly oblige you didnt hear this from me _cough couch wink wink_ good luck if you try bud (start with cheaper stuff 1st so you dont lose out hey)

@SEEYAIAYE

5 жыл бұрын

Airsoft is a joke here, they recently made it legal in SA yet the only vendor is some dodgy cunt at the Adelaide brickworks who sells shitty nerfed down pistols for $200 that are sold for $20 in Europe and the USA. the requirements for Airsoft are so shit it's not even worth the bother, same with paintballing. Can't use legally outside of an official course and can't even buy your own ammo, no wonder gel blasters are getting popular.

@shadowrunner03

5 жыл бұрын

@Mystery Bag pnly 2 states gelblasters are legal in are QLD and SA, every other state has lumped them in with airsoft/paintball and banned them, tassie classes them as actual military guns lol

Highly recommend you do this for as many blasters as possible, should call this one the scar edition. But thank you for doing this, was great to see the difference with some simple upgrades. Would like to know things like the type of o ring, barrel length/t piece design, etc in future ones. And I bought you five coffees today already! Don’t get greedy! Lol! Keep up the good work mate!

@ComradeJehannum

5 жыл бұрын

I think he also has a V addiction.

@benjaminastormiscomin3229

5 жыл бұрын

Yeah a

That O-ring test trick is great!

You should try putting a v3 airsoft gearbox in there and swap the cylinder, cylinder head, tappet plate, and nozzle. That way you at least have metal internals. Looks like the gearbox in there is exactly v3.

@MrJtagSupport

5 жыл бұрын

You’ll probably be able to legally import the parts though he’s not talking the whole gun

@liverous

5 жыл бұрын

nope

@mickeymouse9823

5 жыл бұрын

Agreed stick a d boys v3 gearbox in it with a high torque motor and a set of 16:1 gears you’d be laughing

Low Guido. Could you please make a short video showing how the safety switch should be sitting please. Both my scar and m4 have switches that dont work after taking them apart to upgrade. Thank You

great video and very informative. if like to know where you buy your upgrade parts from so cheap. the sites I've looked at the barrel alone is 25 bucks. also is this the same scar as the army green one.

I know nothing about toy guns, but this was really interesting to watch! Glad I searched you, this is really cool!

@lowguidoschopshop

Жыл бұрын

I'm so glad you stopped by.

Thanks for the video! Does upgrading the spring reduce the rate of fire much?

Much appreciated and i learn a lot from your channel, thanks!

Very good video, has pointed me in the right direction of what i want for my vector 😋

Your cat wigged me out, thought my cat was injured.. xD Great video btw, very informative. :)

Great video mate. I’m a newbie with this and just looking for my first blaster. This has been a very informative video and I’m truely amazed at the gains to be had for such little cost. Is this the model I should go for for a first blaster or is there a better one available that can still be modded like this. ? Cheers

@lowguidoschopshop

5 жыл бұрын

the gen8 is a great starting point, and in my opinion has many advantages over gen9 the M4A1 onr the SCAR V2 are great starters blasters

Just wanted to thank you for all the wonderful information and training I'm just getting into the gel stuff now I'm an old fat guy and love doing stuff with the grandkids this is much better than Nerf guns

Bought a j10 for 220 and bought a 11.1v and its great just like that. Just gonna get a hop up spring and o rings for now then in goes metal parts. Straight out of the box its at 240fps

Subscribed I learned a lot watching this video great work I haft to watch more of your content.

Hey dude, your videos are super helpful! I have a few questions for you, do you think these blasters would be capable of spitting a 6mm airsort bb? I did hear from a friend of mine that I would need to convert the barrel from a 8 to 6mm, but what about the running gear and plunger would that need to be upgraded to alloy or some type of metal to be able to withstand the impact and force of a airsoft bb? I'm from New Zealand and having a hard time trying to find mods for a mp5k is there a place you could recommend I buy from? Thanks again for the videos mate

Hey man thank you for the tutorial, I have one question, what size is the new O ring that u installed.

Any chance of a tutorial video on installing the wells handguard adaptor and wells buffer tube adaptor? Mine will be arriving soon but there is nothing in the net about either

Are the alloy barrels smoother and thus have less drag?

I want to quiet my M4 gel blaster I bought it off Amazon and it’s listed as upgraded gear box, spring and 11.1v battery it comes that way but the piston when it rebounds is loud I have to wear ear pro just because it gets loud after shooting a while. Is there a buffer spring damper?

Hello mate i want to buy my first gel ball blaster what do you recken will be the best store in australia to buy one

I 'have' learnt a lot. Now I know how much more painful everyone else's blasters are going to hit me during my first game.

Hi mate great videos. Can I ask you which blaster in your opinion should I upgrade,I have a ak47j11 gen8 cyma m4 what ya reckon cheers and a blg m16.

pretty much took it and made it into paintball velocity. the shells are only gelatin based. but do you get better range out of these mods. paintball is generally 150 ft. 46 m according to google. but thats even if ot breaks.

Could anyone advise, I made just a spring upgrade, as the easiest one (not on SCAR, but G306T (black) with a spare spring came with the blaster). Sometime after that it just stopped firing, I hear a click in any mode (single-auto), but nothing happens. Tried different batteries. Not sure where to check when I try disassembling it again. Could that be motor is burnt? Or anything else.

Putting 11.1volts battery will make the nylon gears wear off. 7.4volts is good for nylon gears and for the stock spring. If you want 11.1volts battery to fit in better upgrade the nylon gears to metal gears including the cylinder.

The number is followed by FPS ,feet per second. Eg. 163 feet per second is the speed the round travels. The higher the number the harder it leaves the barrel and the longer it will fly.

@lowguidoschopshop

4 жыл бұрын

it still makes my day... every time.

@NotPofkp

4 жыл бұрын

woosh

thank you.. you've just save me a fortune

How do you solve the overheating motors and battery.

Thank you so much for making this, now I know exactly how to upgrade my blaster! I liked and Subscribed for this!!! Do some more mods about other blasters, like the full auto deagle with silencer and “scope” or the P90 or the M416 from wish!! Please if one of them are different from this one

the ACR J10 shoots the same stock as the scar does upgraded, so instead of buying the Scar you could buy an ACR, and all you gotta do is a spring and o ring and your good to go (and 11v battery)

Any cheap alternative to this gun I can get right now? I have a cheap gel blaster pistol but it only takes a 3 pin connection so biggest battery I can get is 7.2v which doesn’t help much

My gel blaster is M4 punisher v1 got any recommend for modify this model ?

mate.. can you do video like this on a acr j10?? would love to upgrade my gun but do dont know how to.

I am noob for airsoft and gelblasters. ı am checking the these for 2 months, most of all coming with 7-8 volt batteries. did not 11volt battery break the circuit of the gun?

great video for details so much!nice !

What makes a gun shoot slow? I upgraded the battery already and still shoots sooooo slow. Is it the motor or spring?

Thanks heeps for this video brother helped me out a bunch !

Can you please say the power of spring that you put inside ? M100 or higher ?

Where do you buy the upgrades from?

I loved how the plunger was getting forced balls deep into the cylinder. My favourite part by far

Hey guido will an m4a1 gen 8 take an 11.1 battery without it being too much to handle?

I would just like to say form a nube perspective I loved your vid . An that green O-ring is from the AC O-RING kit you can buy from REPCO

@timjohnun4297

3 жыл бұрын

What size is it please? I might just go down there and get one

Where can i buy the aluminium barrel & what is the specific lenght & bore? Thank u

Do you now if there is a certain way around when putting the spring in?

ok as an airsoft player there are so many upgrades i would recomend to you like the gears get some steel ones will last longer and give better performance go for shs get a dual sector gear for eve higher rate of fire put an aimtop F430 motor in get a steel piston in there or lunger how you call it and oh get a steel or cnc made aluminum gearbox and put a mosfet in there to prevent gearjams also increas the performance plus shim them and they will be less noisy

Hey ther .. Just wan to ask about the moto and the spring...can i change the moto with 31k rpm but still use the nylon gear,and how long the spring ?

Great video for a beginner like myself thanks heaps

I just ordered one...different style. Where can I find these upgrades to order? Spring..barrel..onring?

14:20 is that 2 bottles of NOS on the floor? 😂 thanks for the guide mate, awesome stuff!

Can you do a vid on how to change the spring easily on the scar through like the buttstock

I have a Aliexpress M416 2 models small one with 3.7v batt and a slite bigger model with 7.4v batt how do i know wich upgradeable parts i can get for these guns? Are they all the same inside? I dont know what parts lie inside these models do you know maybe i can send you the links of the blasters if you want? Just started with my little son with this hobby. Would love the helping advice

I think a teflon washer and swap them bushes to bearings will make it a tad smoother

would you recommend xt30, xt60 or deans for battery ?

Very handy for a beginner thankyou!

Hey Mate, where did you get these parts?

wow thank you for sharing your tutorial and ideas on upgrade

Can i do this to a JM-X2?

Why change the barrell? Nylon or acyrlic should have far less friction than stainless. I just bought some vector gun thing, seems good out of the box. I think fundamentally the design is just bad inside. Ive had airrifles, bb guns etc etc before and i think the best mod would be to turn it into an air rifle.

i'm doing mods to my M4 TERMINATOR, i'm replacing the battery compartment from the an-peq 15 to the buffertube

I don't know where you Magical Pixies came from, but I sure like your pixie juice!

@FlyingDropBearAU

5 жыл бұрын

Probably watches AvE on here. Pretty skookum channel :P

@lowguidoschopshop

5 жыл бұрын

@@FlyingDropBearAU haven't you noticed all my AvE references?

@35millitia40

5 жыл бұрын

You get a sub just for being an AvE fan. Also your coffee is getting cold.

@shortyvids99

5 жыл бұрын

yo mr chop shop, can you unboxing the gel blaster M4 Storm plesae, maybe you can give guide to upgrade too

@mitchellstark2890

5 жыл бұрын

The number is .....FPS feet per second

I'm trying to see if you can put a srb400 motor set up in a m416 gel blaster

My first ATTEMPT at mods was ... Heavy Spring, barrel & Oring with no battery and SHRECKD the tappet ,should have gone the battery first?

Any chance of adding semi auto on your blaster?

Che differenza di prestazioni tra il Ball Blaster e il 6 mm softair classico?

I have a Sijun m4. I want to change my rail system to free float. What do I need?

CAN U PLEASE POST THE LIST OF THE SPECS FOR TG SCAR L I HAVE THE SAME UNIT AND I WANT TO UPGRADE BUT I DONT KNOW THE SIZES.. THANK YOU

Are these springs the same model or dimensions for all gel blasters?

I added an 11.1v battery in mine and it doesn’t shoot fast what am I doing wrong?

where did you get your upgrade parts?

How do you modify a gel blaster surge?

Could you show this but for the SRG 400?

How do u make it shot further are more accurate?

Can I use any 11.1 v battery for it. Or does it have to be a certain one??

Does the spring fit the splatter ball gun 400?

Hey do you think you can do a video on the luochen ar15 please

Can you put grease on your blaster or is it bad

Hi, do you have the link for the Aluminum barrel

Hi, do you have the link for the Nano tech battery

Where you get the feather and the alu run from

Sewing machine or air compressor oil would be the go huh?

Daamn!!! With just change the o-ring the fps are insane!!!

@lowguidoschopshop

3 жыл бұрын

Basically these blasters purposely came with an undersized O ring that didn't seal so that they would be weaker for the toy market. But could be made fairly serious fairly easily.

what is the name of the upgraded spring again?

Are you able to link the battery and barrel?

Could you do the m401?

Okay, my AK-47 (Little Moon, it has the Puma logo in the top left of the box) does only 170fps according to a Malaysian reveiwer. It would good to boost it to about 250fps as a beginner project.

@1969cmp

5 жыл бұрын

....it also has a two-piece barrel, which is also the case in their very neat looking AK-12 (Black Ops sells them)

We’re did you get the metal barrel?

Hi were do you get barrel's from? Cheers

Spring and o ring,size?