Thanks for the info it rally helped

Nice video

Nice video, did you notice any difference in the ride after you changed this? What about after the engine oil. My buddy said his ran noticeably better once he did initial fluid changes

@endurancekennels

5 жыл бұрын

Yes for sure. Much quieter and smoother all around.

My reverse has went out for some reason. I have the 4 seater Texas Edition

@endurancekennels

4 жыл бұрын

Might just be a linkage adjustment.

@79xlch

4 жыл бұрын

@@endurancekennels Thought about that but all other positions work fine. Seems if I move the linkage it would affect all others. Park is good, reverse grinds a little but will not engage. Past that high works then low works also?

@endurancekennels

4 жыл бұрын

@@79xlch crappy! Is it still under warranty? I have a two year warranty on mine.

@Mr79xlch

4 жыл бұрын

@@endurancekennels I assume 1 year with it being 21 months old 880 miles

@endurancekennels

4 жыл бұрын

@@Mr79xlch two year it's a commercial work vehicle for the kennel.

Decent video I had to skip a lot I didn't care about the turtle just was trying to get right to the point. So there's not really a separate transmisson you have change the oil in, thats basically The transmission / rear gearbox you just changed the oil in? I'm really needing to change mine in my xmr.

@endurancekennels

8 ай бұрын

Yes, no separate gear box like the Outlander has. Talk about difficult, oi 💩

How is the new machine doing?

@endurancekennels

5 жыл бұрын

Running great! Nice machine all around.

Was there a crush washer on the plug?

@endurancekennels

Жыл бұрын

I think there was a copper washer

I noticed the end of my plug was full.of what looks like an anti seize? Did you notice anything on yours

@endurancekennels

4 жыл бұрын

No. Do you have a pic? The plug is magnetized so it picks up slack could be just that.

@jordanb8909

4 жыл бұрын

@@endurancekennels it does yes. I went on some forums and they said its common for the first oil changed

@jordanb8909

4 жыл бұрын

@@endurancekennels thanks for the reply

Is it ok to use without warming it up? I see you have no temp bars showing.

@endurancekennels

4 жыл бұрын

Of course yes. Takes a while to warm up.

That was the engine oil plug 😂

@endurancekennels

Жыл бұрын

Gear box 👍

Your details about the turtle and how dirty or clean the oils has nothing do to with how many quarts it takes to fill the diff

@endurancekennels

10 ай бұрын

Water is wet.

You high?

Take the muffler out. I did it without taking anything off. I have smaller hands tho. It was a big pain in the ass for nothing. I have 1200 miles on mine and it wasn't dirty. Waste of time.

@endurancekennels

11 ай бұрын

What are you talking about?

@benrodriques

11 ай бұрын

Cleaning the speed sensor. Sorry

You dont screw in a dipstick to check fluid level....just so u know for next time.

@endurancekennels

3 жыл бұрын

Interesting so what do you do?

@AllThingsMech

3 жыл бұрын

Luke: on Can Am machines, yes you do. It says so right in the manual. On some other brands of machines you aren't supposed to (hondas for example), you set the dipstick on the threads without screwing it all the way in to check the oil, and you check it at full operating temp. Not so for Can Am's - you check it with the oil cold and dipstick screwed all the way in. Please don't make blanket statements about equipment maintenance without knowing the correct answer. If someone takes that advice and you've given them the wrong info, they'll be over/underfilling their sump...and on machines with small sumps like this, the difference between the dipstick being screwed in or not can end up being a significant amount of oil.

Amsoil is NOT the best 👍🤷‍♂️🤦‍♂️ Redline for the win!

@endurancekennels

3 ай бұрын

Amsoil, been a dealer since 1996