I was on a training course with Roy when he was at baxi, the mans a legend full of knowledge!

Please do more combi boiler fault finding videos really useful and appreciate you taking the time out to make them 👍

Awesome real world video, loads of valuable info there, great advice at the end ala not rushing in and basically just take a step back and think "what should be" v "what is" happening, Cheers Roy and Allan.

Another brilliant video Allen.

Great video Allen, I love these diagnosing videos. Very useful. Thank you

Another fantastic and informative video Roy / Allen

Really helpful video, well explained and really helped in understanding the steps involved with fault finding. Thanks.

Good stuff Roy thank you.

Great stuff again .a video on open therm on the eph control would be great. Top job both of you .

Fantastic video and tips to find the fault.

That was really well presented. Thank you.

A very intimate video❤ he knows exactly what he is doing

Such a good video again, Allan you know your smart bro , thanks a million

Fantastic video

Thanks Very GOOD CONTENT , THANKS To Allan And His Team,

Keep your videos coming learning loads thanks 👍

Wonderful video..explained well!!!

Brilliant video

Well handy video, nice one!

Brilliant video 👏👏

Very useful, thanks Roy.

Great video, thanks . From ARGENTINA

Just starting on repairs this awesome, thanks lads

@AllenHart999

3 жыл бұрын

Check out the full playlist as we have loads of fault-finding videos. Thanks.

Thanks for this, a newbie to boilers but that was a very good watch.

Brilliant detail as per 👍

Thank you, Allen!

@AllenHart999

8 ай бұрын

My pleasure!

Excellent vid

Great video, thanks 😀

great video, easy to understand.

I enjoy your videos! I love watching them. But I also have a question. My boiler (Intergas eco) we have hot water, but the heating isn’t right. No error code at all and the boiler is only at half capacity as it should be (according to another engineer who couldn’t fix it)

Excellent video👌

Hi. Great video Ref baxi 105he. Is the CH thermistor on the LHS (pipe) the same type used on the DHW as shown on this video. Thanks

Great video … it makes it a lot easier to understand when you explain things like that.. just always forget when I’m diagnosing some faults to take my time an do through each process, would be interested in boiler breakdown courses !

More of these pls 😁

Nice video . 👊🏻

Similar fault finding videos would be fantastic!

Brilliant video thank you it is useful video

Thanks for sharing

Thank you so much

Nice Wera kit👍🏼

Now all that's left to fix is that infernal whistling tap! 😁

@richmalin1454

9 ай бұрын

😂

Great video chaps! Great trick on the thermistor, would most harness be the same or different on each manufacturer? Would like to make up that test piece. Many thanks 👌

@royfugler9971

2 жыл бұрын

Hi Jeffrey, some manufactures use the same thermistors, so the plug from one manufacturer would fit another manufactures thermistor.

@jeffreyfarr4582

2 жыл бұрын

@@royfugler9971 thanks Roy for your reply and for the videos, very helpful 👌👌

Would this thermistor, if faulty, be the cause of the pump running continuously?

Anyone know where you can get that gas analyser adapter for getting onto your P1’s please?

Could you let me know the dates for your fault finding training days

I've been on a few training courses with Roy I would say I'm more confident in a baxi than any other boiler

@AllenHart999

2 жыл бұрын

Thank You

very good video! very helpful. working on valiant and Worcester would be even better :) or any multi meter stuff.

Brilliant video Roy. Q: Why's the HW tap piped up on the RHS at your centre? 😃

@AllenHart999

2 жыл бұрын

The left tap is also hot water, They are for all the different boilers

My Halstead Eden CBX 32 does not have a DHW temp sensor, it must be telepathic?

Great vid, do most manufacturers dhw thermistors have the same resistance at the temperatures in that chart? Thanks.

@AllenHart999

2 жыл бұрын

A lot of them do but it's always worth checking the installation instructions. Thanks.

@gunsey876

2 жыл бұрын

@@AllenHart999 👍🏼👍🏼

When using the hot tap I hear clanging/banging noise coming from next to expansion tank almost like a stone in a tumble dryer ? It’s puzzling me

Great

Another hw issue that might be worth mentioning to the inexperienced out the is back flow from shower valves etc..

Hi just want to know the cost of fault finding training? Thanks

Yes Allen more of these please. You replied to my TikTok saying get in contact but how do I do it mate?

@jamesmcgilvray6363

3 жыл бұрын

Thanks Allen I won’t forget you over the weekend when’s the best time to call you?

@jamesmcgilvray6363

3 жыл бұрын

Saved it mate you can take it down if you want

Main eco lite compact showing e50 code any ideas

Where can I find baxi 80 E technician? Do u know which model can replace baxi comb 80 E

Roy/Alan Wanted to let you know how useful and helpful these video's are and and how I for one but not alone I'm sure are very appreciative. You'll deffo be getting some business from me and I'll be booking in for a fault finding course with Viva at my next earliest opportunity. Brilliant 👌

@AllenHart999

6 ай бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Very helpful video tnx😂

I got problem with main combi eco elite not thermostatic shower valve but hot water temperature fluctuating after plate heat exchanger replaced and boiler display going 70+

@AllenHart999

8 ай бұрын

sounds like blocked plate

💝💝💝

Do more Worcester’s not just Baxi or ideal

🤘😎🤘

Hi roy you trained me as a baxi engineer i left just wondered why you did

@AllenHart999

8 ай бұрын

He was made redundant.

@John-ys2pn

2 ай бұрын

I'll answer that for him...cut backs Hours cut...

sound is too low/

@AllenHart999

2 жыл бұрын

Thank You