Nice overview of it!! Helping me out for sure......want the fish on screen like my old hummingbird......you guided us there!!! Thanks!!

Thanks man! Great tutorial.

@betavinasmokewolf9890

6 жыл бұрын

Kym Dinh thanks bro!

Thanks for the review. I'm planning on buying one for my hobie mirage outback. Do you have a video on the water? So we can see how it shows in action 😎 I want to buy one that shows HD clear so you can see the fish marks easily. I'll be using it all in salt water. Thanks

@betavinasmokewolf9890

5 жыл бұрын

kaanorer99 thank you for watching. Unfortunately, I don’t have an on the water video. I plan on doing so soon in the near further. From my experience, I can easily mark fish on my graph. I’ve also used it for jigging for stripers. You can see ur lure drop down when you’re within the cone. Thanks for watching again and tight lines.

Thank you buddy for sharing

I have the Striker Plus 5cv and have a couple questions. When viewing the split frequency I can't tell any difference. I mainly fish a small lake, not very deep (15 ft max) and may have brush or weeds in areas. How would I use the different frequencies in this case? I also noticed you use a dedicated battery. My transducer is trolling motor mounted and connected to the same trolling motor battery as well. Would this create any electrical noise issues that I should adjust?

Thank you very for your help!!

perfect bro

Looking to buy that same model! Do you know if it automatically maps the depths?

I am looking at getting this model. If I understand this right, it "plots" the lake floor for me as I go over it yea? Depicting contours and displaying it?

@betavinasmokewolf9890

6 жыл бұрын

Josey4u not exactly. It will give you time, depth, temp, and gps coordinates. U will have to manually type in using a scroll or place icon to mark ur waypoints. Hope this helps

Does it has an sd slot for navionics and chartplotting maps?

Hey bud I have the striker 9sv plus and I can’t figure out how to get a good picture on side down or sonar .. if I put in simulation mode like you did is that how I set it up ?

@betavinasmokewolf9890

5 жыл бұрын

BigC thanks for watching. Try adjusting ur sonar frequency to chirp 455 kHz and adjust ur contrast to your liking. U might have to adjust the gain(sensitivity) too. Hope this helps. Tight lines man!

Where did you buy the gaskets coming out of your box?

Can I mount the transom-mount transducer inside a fibreglass hull in a small tank?

@betavinasmokewolf9890

4 жыл бұрын

Don Amoore it should be fine but you won’t get an accurate temp reading. Sorry for the late response.

Hay bro, can you give me more info on how your mounted it on the ram ball? I can’t seem to figure it out. Thanx!

@betavinasmokewolf9890

6 жыл бұрын

Lewis' Outdoor Adventures the ram ball secured by a t bolt and tightens onto the gear track. The transducer arm open socket, I purchased at ack. The RAM double socket arm for the fish finder, I purchased on amazon. Hope this helps. Thanks for watching

Also is that a Native Slayer? I am installing it on a Titan 10.5

@betavinasmokewolf9890

6 жыл бұрын

Josey4u yes it is a native slayer 13. Congrats on ur titan 10.5. It should be an easy install. I like my unit next to my seat

when you talking about your mount which ram mount did you get and does the unit swivel or is it stationary? I bought the universal and couldn't add the swivel mount to it.

@betavinasmokewolf9890

5 жыл бұрын

Jeffro Caldwell I used the 1 inch ram mount ball and a ram mount short arm. My unit is able to swivel. What I had to do is place a large aluminum washer and 2 large rubber washers underneath the bracket. I then placed a 1/4 20 screw in the ram ball and fed it through the bracket. I secured it with a lock nut. Hope this helps. Thanks for watching.

@jeffro7407

5 жыл бұрын

thanks for your reply back. --- sounds like I got the wrong mount, going to look at mount again on ram site and try and figure out which one I need to reorder. would you know the item# for the right one?

@betavinasmokewolf9890

5 жыл бұрын

Jeffro Caldwell Part# RAM-B-201U. You can find it on amazon for cheaper. glad I can help.

@ericpigg2689

5 жыл бұрын

I used the universal mount and left off the swivel base. In the rare event I need to swivel it, I just loosen the Ram Mount and swivel it.

Hi! Its the transducers is 2500ft?

Boss i have the garmin cv5 as well and it WILL NOT show any fish icons at all only gives me an option on sonar of 1 fish ,2 fish or 3 fish to select BUT does not show fish or depths? Any ideas any help would be great ! Thank you ! If ANYONE who knows how to get fish and depth on their cv5 could you PLEASE LET ME KNOW ?

Hi just watched your review. What battery do you use and how long does it last. Cheers Keith

@betavinasmokewolf9890

4 жыл бұрын

Keith Osborn I use a 10ah Nocqua lithium battery. This battery will last me approx 6-8 hrs each day for 3 days on a single charge. Thanks for watching.

@longhtym

3 жыл бұрын

I use 12v 18ah last 36hrs with out charge

Hello I have a question. Can u tell me what’s the purpose of turning on and off the simulator.

@betavinasmokewolf9890

6 жыл бұрын

Joshua Munoz I’m assuming simulator mode is for display. Also, I think it gives u an opportunity to play around with the different setting on simulator mode to see what you do or don’t like. For example, increasing or decreasing sensitivity or ping speed. Thanks for watching. Tight lines!

How did you get the flasher bar showing up at the side

@betavinasmokewolf9890

4 жыл бұрын

bbushert at 1:03 you have to go to traditional sonar. What you want is called the A-scope in settings. I like that view. On 1:20 and 1:52 shows how to get to the A-scope. When I say preference, its the button with 3 lines. Hope this helps! Hope you were able to change your language setting on your fish finder.

Do it show the speed?

What’s the difference with clear view and down view ???

@betavinasmokewolf9890

5 жыл бұрын

FishOnTv sorry to respond so late. Clear view with chirp adds more power to the sonar than traditional 2d sonar. You can identity fish better. Down view is used for identifying structures. More detailed picture in down view. Harder to detect fish in down view. Clear view will present fish as arches. In down view, fish appears as dots. Hope this helps. Thanks for watching.

does the transducer have to be connected to see simulator mode

@betavinasmokewolf9890

2 жыл бұрын

No. I don’t think so.

Doez this Garmin have the quickdraw contours?

@betavinasmokewolf9890

4 жыл бұрын

Roberto Roque8 Garmin does have units with that function but not this unit. Thanks for watching.

Is it possible to split the screen horizontally? Or only vertically in Customize home setting?

@betavinasmokewolf9890

6 жыл бұрын

Sorry took so long to respond. No, this unit cannot split horizontally as far I can see in the settings.

Mine freezes and stops recording depth until I power off but doesn’t always cure it. Anyone had the same problem?

Hello I have a question. Is there a Russian language in the device settings?

When you see the fish how you know where they are at

When I turn my unit on I have a different home screen then you.the problem is I just got the unit today and it is in some crazy language that I cannot read I can't find the language setting to change it to English

@betavinasmokewolf9890

4 жыл бұрын

bbushert thanks for watching. First, when the screen display turns on I would scroll down to the bottom left corner, press the check button twice, and press the down button twice. That should take you to language. Press the check button and you should be able to change the language. Hope this helps. Tight lines!

@bcain5823

4 жыл бұрын

If you just bought this a month ago (June-July 2020) you probably have the Striker Plus. I just bought one and one of the differences is the Home window presentation.

Mine just went black wont come back on. No chirp sound when i comes up nothing.It is getting 12 volts of power at the unit but nothing. Its just went black on the way in in the black of night . Anyone have a idea ? Is there a reboot process or a reset by a menu button combo ? Or did it die after 2 summers in Michigan ? I'm not a happy fisherman right now !

@betavinasmokewolf9890

6 жыл бұрын

Brian Loeffler I’m sorry to hear about your unit. I had an old battery that didn’t charge well. I did notice my unit would shut off and turn on with a blank screen with the old battery. I believe there is a setting where it shuts off at or below a certain voltage. I think it’s 12v try fully charging ur battery and see what happens. Idk how long ur warranty is on ur unit but u can call garmin for tech support. Hope this helps.

@brianloeffler4842

6 жыл бұрын

CONTACTED GARMIN support last Wed .Voltage was not the problem (was about 12.3) Talked to a Great guy (Jason ?) Took great care to listen to me and worked out A DEAL FOR ME . ITS NOT FREE ....BUT WHAT IS TODAY?. They seemed interested in taking care of their customers and working out a satisfactory settlement. I'll keep buying their products ! Thanks Garmin !

@betavinasmokewolf9890

6 жыл бұрын

Brian Loeffler That’s awesome! Glad to hear about the great service and finding ways to find a solution. Thanks for letting me know. Tight lines!

How many meters can it go?

@betavinasmokewolf9890

5 жыл бұрын

Shania Shay when using the 2d chirp sonar, it’s up to 2300 ft. When using clear vu, it’s up to 250 ft.

@shaniashay8158

5 жыл бұрын

Thank you and is there any fish finders that is good and is 1000 meters deep. My dad is a fisherman in Fiji and I’m sending him that as a gift.

@betavinasmokewolf9890

5 жыл бұрын

Shania Shay garmin is a good brand and so are others. It really depends on how much you are willing to spend. If you look at fish finders specifications online, it should tell you the depth range. Hope this helps. Thanks for watching.

Does it support the Arabic language? Thank you

Gri8

Fourono

💤💤💤

music sucks

zooming thru things way to fast for a novice to learn anything, but ill figure it out.

Shit music is too loud