The prv is situated outside the tray. The hot outlet does not come up and over the geyser, the vacuum breaker is outside the tray.
@niconine2688 ай бұрын
Thanks for the info. Great video
@georgewepener88603 жыл бұрын
First good video I've found! Thanks! Is this up to date for all current regulations?
@elliotronald1884Ай бұрын
The Prv needs to be at least 100mm above the geyser the next person to go for maintenance on the Prv will have to drain that whole geyser because of syphon more over the Prv is outside of the tray
@trevorelgram8466 ай бұрын
Best video ive seen so far ao easy to understand should i use copper piping or poly pipe as this is cheaper let me know thanks Trev
@aurethlouw82742 жыл бұрын
When the thermostat is connected, is it necessary to turn it of and then set it to the required temperature? Just to make sure it switch on!
@stacyjoost53744 жыл бұрын
shouldnt the hot water vacuum breaker be over the tray?
@kencorlett93234 жыл бұрын
👍👍👍👍👍👍
@gajimafeet10 ай бұрын
thank you do you also have solar geyser install
@ericscaillet22324 жыл бұрын
Can this geyser be installed vertical?
@JaceJhb4 жыл бұрын
I noticed no mention of R1 lagging, which is required by IOPSA?
@hbotes5646
4 жыл бұрын
The eletrical housing cover on the geyser has come lose and hot water is spraying from it (not alot). Is the geyser done or worth a fix
@hbotes56464 жыл бұрын
The eletrical housing cover on the geyser has come lose and hot water is spaying from it (not alot). Is the geyser done or worth a fix
@AlnT1003 жыл бұрын
Solar direct flap panel?
@sandisonkosi19346 ай бұрын
2:50 is that pipe left open or where does it go thereafter?
Пікірлер: 21
Fantastic video. Very clear and accurate. ❤❤❤
wow! clean & clea video tnx from S.A
Great video!!!
Awesome video bro
Great video
The prv is situated outside the tray. The hot outlet does not come up and over the geyser, the vacuum breaker is outside the tray.
Thanks for the info. Great video
First good video I've found! Thanks! Is this up to date for all current regulations?
The Prv needs to be at least 100mm above the geyser the next person to go for maintenance on the Prv will have to drain that whole geyser because of syphon more over the Prv is outside of the tray
Best video ive seen so far ao easy to understand should i use copper piping or poly pipe as this is cheaper let me know thanks Trev
When the thermostat is connected, is it necessary to turn it of and then set it to the required temperature? Just to make sure it switch on!
shouldnt the hot water vacuum breaker be over the tray?
👍👍👍👍👍👍
thank you do you also have solar geyser install
Can this geyser be installed vertical?
I noticed no mention of R1 lagging, which is required by IOPSA?
@hbotes5646
4 жыл бұрын
The eletrical housing cover on the geyser has come lose and hot water is spraying from it (not alot). Is the geyser done or worth a fix
The eletrical housing cover on the geyser has come lose and hot water is spaying from it (not alot). Is the geyser done or worth a fix
Solar direct flap panel?
2:50 is that pipe left open or where does it go thereafter?
@elliotronald1884
Ай бұрын
Outside of the roof where you can see it