Galaxy S7 Edge Screen Replacement - Charging Port Repair - battery fix

Ғылым және технология

Smart Phone Repair Tool Kit: amzn.to/1Y0U7iR
Galaxy S7 Edge screens are HERE: bit.ly/29laatj
Heat gun: amzn.to/1WUHl4c
Professional Back Glass Adhesive: bit.ly/1WbrT5C
Charging Port: bit.ly/29j4Nue (Make sure it fits your model)
LET ME KNOW IF THOSE LINKS STOP WORKING!!
This video shows the teardown of the New Samsung Galaxy S7 Edge Android Smart Phone. It shows how to remove the back glass panel and dissemble the phone using a heat gun and pry tools.
Replacing the Galaxy S7 Charging port is not easy, but I explain what needs to be done if there are no other options. Make sure that your charging port is not clogged by dust or lint before opening up your phone.
A battery replacement, camera replacement, or back glass replacement is probably going to be the easiest repairs for this device.
'Liquid cooling' heat pipe explanation: 4:27
Camera Optical image stabilizing gyro: 6:20
The camera I used to film this video: amzn.to/1IjlaCD
The Lens I used for this video: amzn.to/1QOXDw2
And this Metabones adapter: amzn.to/1R7Ltic
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
GooglePlus: bit.ly/1YyKice
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Пікірлер: 1 100

  • @totetoBT
    @totetoBT8 жыл бұрын

    You forgot to put back the important gold sticker!!!

  • @OnlyKelp

    @OnlyKelp

    5 жыл бұрын

    Ayan Raja no

  • @SuperSanic..

    @SuperSanic..

    4 жыл бұрын

    He sold the gold

  • @madzoroyal

    @madzoroyal

    4 жыл бұрын

    The essential gold sticker one 😂

  • @gamerboyalperen3918

    @gamerboyalperen3918

    3 жыл бұрын

    It can be water resistant if u a super repairer

  • @zexyparody233
    @zexyparody2338 жыл бұрын

    This guy, has something to it that I don't seem to find on other youtubers. His voice is like that of Bob Ross (go search him up if you don't know him) MAYBE EVEN BETTER. You see, his voice is so calm and collective, I can basically use his videos as a meditating device.

  • @rambo20866

    @rambo20866

    8 жыл бұрын

    yep yep!!!

  • @StormOneUK

    @StormOneUK

    8 жыл бұрын

    Haha so true I've actually subscribed cos I found the video so soothing.. :D

  • @rewiredhusky9907

    @rewiredhusky9907

    5 жыл бұрын

    While he's taking apart a device? Yeah!

  • @marfilforteza
    @marfilforteza8 жыл бұрын

    So...it has a removable battery after all.

  • @Jun_DaWondaBoi

    @Jun_DaWondaBoi

    8 жыл бұрын

    u can. if u got tools, brave and extra battery pack haha

  • @shinjid3705

    @shinjid3705

    8 жыл бұрын

    +Marfil Forteza Every phone does. Only difference is that some are harder to swap and u need to be careful to not damage ur phone.

  • @AcornFox

    @AcornFox

    6 жыл бұрын

    Everything is removable if you pull hard enough

  • @michaelmorales1475

    @michaelmorales1475

    6 жыл бұрын

    SvAp0r Galaxy S5

  • @nigherperu

    @nigherperu

    6 жыл бұрын

    🤣🤣🤣

  • @goobydntfear
    @goobydntfear8 жыл бұрын

    It's liquid gas... it remains liquid because of the presure of the pipe... if you open the pipe, it reverts to gas and you don't see it... facepalm.

  • @dragoss16

    @dragoss16

    8 жыл бұрын

    +ascendence you are right but if there was actually a compressed gas it should make a fizzle noise when cutting that pipe

  • @tannerjarreau6953

    @tannerjarreau6953

    8 жыл бұрын

    +ascendence The pressure it would take to keep the vapor as a liquid would be ridiculous. There is never any liquid in the pipe. Also, I can't imagine there being a vapor that is even close to being as conductive as a liquid. The whole vapor thing sounds awry.

  • @BigHumz155

    @BigHumz155

    8 жыл бұрын

    +dragoss16 I think the videos overdubbed or something. Maybe it does make a fizzing noise.

  • @dragoss16

    @dragoss16

    8 жыл бұрын

    Humza Ahmed hmm yeah , but I think the guy from video is not that dumb to hear it and still say there's no liquid .... and I also think that there's no liquid because I saw those copper thin wires like wadding ... but who knows ...

  • @fibergran9

    @fibergran9

    8 жыл бұрын

    +ascendence of course. It also has a nuclear reactor thanks to that refrigeration.

  • @mjbadboy14
    @mjbadboy148 жыл бұрын

    2:31 that's what my girl said last night.

  • @mistamaog

    @mistamaog

    8 жыл бұрын

    At least size doesn't matter to her C=

  • @mjbadboy14

    @mjbadboy14

    8 жыл бұрын

    iMiguelAOG LOL!!👍😏

  • @sharyarmuzafar8049

    @sharyarmuzafar8049

    8 жыл бұрын

    ahahhhhhah

  • @SalvadorTarantino22

    @SalvadorTarantino22

    8 жыл бұрын

    +WANNTEDD135 thank you very much for the laugh

  • @mjbadboy14

    @mjbadboy14

    8 жыл бұрын

    Salvador Tarantino Anytime

  • @thomasfisher1829
    @thomasfisher18298 жыл бұрын

    *Cuts open heat pipe* "Good as new!" phone explodes upon boot

  • @michaelmorales1475

    @michaelmorales1475

    6 жыл бұрын

    L

  • @NERO-ez1mn

    @NERO-ez1mn

    6 жыл бұрын

    heatpipes that use in the example has no liquid impossible to explode

  • @hanry2344

    @hanry2344

    5 жыл бұрын

    its not waterproof anymore

  • @ludwig4029

    @ludwig4029

    5 жыл бұрын

    Zeep50 It was never waterproof anyway :P but it was water resistant

  • @hugsoverdrugs6730

    @hugsoverdrugs6730

    5 жыл бұрын

    @@ludwig4029 water resistant my ass,mine just died from not even being to water for 30 seconds,rip my charging port :(

  • @TheArt0fBoredom
    @TheArt0fBoredom8 жыл бұрын

    Also, you would still be allowed to call it a liquid cooling system because the gas would need condense into a liquid for the copper wick inside the device to function correctly. The gas would heat up, condense around the wick, travel through the wick into a cooler part of the phone (assuming) and turn back into a gas and distribute evenly in the tube again when cool.

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +TheArt0fBoredom Hey thanks man. And thanks for letting me know about that stolen video. Ill file the copyright claim right now.

  • @GiovanieRodz

    @GiovanieRodz

    8 жыл бұрын

    Thanks for the answer! I Iearned something new :D

  • @tstokemb

    @tstokemb

    8 жыл бұрын

    That's not how condensation works. It's the other way around. The gas condenses in the cool area turning into a liquid which travels to the hot area and evaporates into gas which condenses in the cool area and so forth. This phone has a glorified heatsink, no actual liquid cooling unless liquid is present inside the pipe.

  • @RPMRosie
    @RPMRosie6 жыл бұрын

    there's actually 3 forms of image stabilization: 1. Optical Image Stabilization, where the camera actually moves 2. Digital Image Stabilization, where it's done in-software 3. Chicken Image Stabilization, where the camera is strapped to a chicken's head

  • @thelonelypotatogamez5639

    @thelonelypotatogamez5639

    6 жыл бұрын

    They all sort of work

  • @kenbee1957

    @kenbee1957

    5 жыл бұрын

    😆😆😆😆😆😆😆😆

  • @mistamaog
    @mistamaog8 жыл бұрын

    I'm guessing the water resistant rating is no longer valid after you put everything back together

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    You are correct.

  • @mistamaog

    @mistamaog

    8 жыл бұрын

    +JerryRigEverything So will there ever be a screen replacement video for this or the S6 Edge+? Besides this teardown I'd like to see an actually replacing of a screen. My friends S6 Edge+ has a cracked screen. I was thinking of sending it in for repairs but am tempted to try myself.

  • @globalwrestling7777

    @globalwrestling7777

    8 жыл бұрын

    6:55

  • @globalwrestling7777

    @globalwrestling7777

    8 жыл бұрын

    6:55

  • @Satya4188

    @Satya4188

    8 жыл бұрын

    +JerryRigEverything but i not wrong, you can get the ip rating back if you replace the battery on official service center... What do you think?

  • @CMDR_Birb
    @CMDR_Birb8 жыл бұрын

    Great review! Very detailed. The S7 Edge sure is a marvel of engineering. Imagine going back in time and letting Steve Jobs try it out right before he launched the original iPhone. He and everyone would be blown away lol

  • @aasimwz

    @aasimwz

    2 жыл бұрын

    I remember having same opinions about the s7 edge, I was blows away and I wanted it immediately, good ol days

  • @tylerdoop
    @tylerdoop8 жыл бұрын

    Your channel is so cool. Thank you for all the info! I loved how you added in that little extra too.

  • @piciu256
    @piciu2568 жыл бұрын

    can you test the xiaomi mi5 when it is available?

  • @ShawnSQZhang
    @ShawnSQZhang8 жыл бұрын

    "Let me just cut the liquid cooling system to show you transparent gas"..."Now if I close it again, the gas will return to it's initial encasing where everything will be as good as new again"... Dafaq? You've destroyed the LCS 🙈

  • @JAKETHESNAKKE

    @JAKETHESNAKKE

    8 жыл бұрын

    but the person who buys this on craigslist won't know that

  • @zacharyybarra1722

    @zacharyybarra1722

    8 жыл бұрын

    +Thafier salie hahaha right!!!! Suckuhhhh

  • @nogghan4637

    @nogghan4637

    5 жыл бұрын

    @@zacharyybarra1722 he actually went on to use this phone as his every day phone until the S8 came out, he talked about it in some other videos

  • @nogghan4637

    @nogghan4637

    5 жыл бұрын

    It is still copper it will transfer heat just fine it just won't be as efficient as it possibly could be and might throttle under gaming or prolonged heavy use, not even necessarily Netflix or something like that but more intense

  • @athanoslee
    @athanoslee8 жыл бұрын

    no liquid once you sliced the heat pipe open does not mean the chemical inside does not form liquid when it is sealed in. maybe the chemical has a very high saturated vapour pressure or the heat pipe is actually pressurized inside. either way, the chemical vapourises very quickly so you would not see any liquid, which is actually a good thing. because that is how the chemical quickly brings out the heat, by vapourising.

  • @piciu256

    @piciu256

    8 жыл бұрын

    nope- there was no pressure ;)

  • @Akumetsubg

    @Akumetsubg

    8 жыл бұрын

    +athanos lee Do you have any source for that or did you just made it up on the spot ?

  • @athanoslee

    @athanoslee

    8 жыл бұрын

    +Akumetsubg Not really. I just applied common sense here. The copper fibres you see inside the heat pipe are actually for the liquid to circulate.

  • @Akumetsubg

    @Akumetsubg

    8 жыл бұрын

    athanos lee Well I applied common sense by asking for a source , guess what I got.

  • @athanoslee

    @athanoslee

    8 жыл бұрын

    +Akumetsubg I don't know what source will satisfy you. Maybe reading about heat pipe on wikipedia will tell you enough.

  • @advillaner
    @advillaner7 жыл бұрын

    You are one Great Tubber my friend. Direct, concise and very smooth delivery. Keep up on keeping on. Well done.

  • @Der_Z0nK
    @Der_Z0nK8 жыл бұрын

    Hey! First time I'm watching any clip about Smartphone repairs. Just wanted to leave a quick thank you, because you basically just gave me the idea to try this stuff out myself. I preordered the S7 Edge and would very much like to be prepared for when it breakes or certain parts reach the end of their lifespan. Luckily I still have a very old S3 with a broken home button at home, so that looks like a perfect playground. So anyway, you have my subscription, and my thanks! Keep up the good work

  • @omgitsme435
    @omgitsme4358 жыл бұрын

    Is this gonna go ebay as "Lightly Used" :D

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +W-_-T lol, lightly used... Small scratch on screen... you know the drill.

  • @squaller9254

    @squaller9254

    8 жыл бұрын

    +JerryRigEverything also a little burned and scratched on back

  • @ethanf30

    @ethanf30

    8 жыл бұрын

    +EABOY2600 that was from his burn test

  • @moemenmasry8402

    @moemenmasry8402

    4 жыл бұрын

    2020 and he is still using this phone

  • @iamone_
    @iamone_8 жыл бұрын

    Your channel is the best! Love your videos:). Generic comment but i have to tell you that lol.

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +Couch_Ech Thank you!

  • @brucecolbert3255

    @brucecolbert3255

    8 жыл бұрын

    +JerryRigEverything Sir, as an electrical engineering student, this video for me was more than just great. Watching how those tiny circuits are placed was just awesome.

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +Bruce Colbert Thanks man! Glad you enjoyed it.

  • @brucecolbert3255

    @brucecolbert3255

    8 жыл бұрын

    +JerryRigEverything Also, great Hillary jokes in your Sony Xperia Z5 Premium - Camera Lens Replacement video!

  • @Dante199006
    @Dante1990068 жыл бұрын

    Can you put higher Mega-Pixal cameras in these phones? Just curious.

  • @ajmatney5
    @ajmatney56 жыл бұрын

    Why are these so calming and relaxing? Dude should make audiobooks tech repair guides

  • @TechnoGeek209
    @TechnoGeek2097 жыл бұрын

    So there's no way to replace the charging port without destroying the screen itself ... Great

  • @Minemac69

    @Minemac69

    7 жыл бұрын

    There is really really small chance to get the screen out undamaged, but it is pretty impossible

  • @jimmygangster

    @jimmygangster

    7 жыл бұрын

    Welcome to the new design of Samsung phones. Anything S5 and beyond is like this.

  • @tacos1308

    @tacos1308

    6 жыл бұрын

    My charging port is basically useless

  • @NotRobbie

    @NotRobbie

    6 жыл бұрын

    tacos1308 Just buy a wireless charger if you don't want to pay for a replacement.

  • @tacos1308

    @tacos1308

    6 жыл бұрын

    NotRobbie it turned out to be my cable lol

  • @fuglyyyyy
    @fuglyyyyy8 жыл бұрын

    "i just chopped the shit outta the heat pipe, imma push it closed and its good as new"

  • @Aarosh123playz

    @Aarosh123playz

    6 жыл бұрын

    lol

  • @charm2348

    @charm2348

    4 жыл бұрын

    @@Aarosh123playz i was looking for this comment lol

  • @shauntrenton1371
    @shauntrenton13718 жыл бұрын

    Jerry! You've helped me Help myself. Great video!

  • @TechByZach
    @TechByZach8 жыл бұрын

    I'm not sure if I'm more impressed with the teardown or you putting it back together. Either way the quality was on point!

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +Zach Straley Thanks man. 5.5 million views on your iPhone date glitch vid. That's so crazy!

  • @technotin
    @technotin8 жыл бұрын

    I'm impressed, and I click subscribe

  • @xrayway8697

    @xrayway8697

    8 жыл бұрын

    +CIRCUS MAXIMUS me too. after watching no doubt i just click it.

  • @luisff7030
    @luisff70308 жыл бұрын

    The Galaxy S7 Edge cooler is a vapor chamber heat sink. It is the same used in most of the desktop to cool the cpu. The vapor chamber heat sink have cooper piper with a refrigerant inside(but they can add a second liquid to increase conductivity and reduce the "gas bubbles" at the processor side). The refrigerant is one or a mix of those who are on this list: en.wikipedia.org/wiki/List_of_refrigerants The refrigerant is inside the cooper piper at high pressure, and exist at 2 phases that are mixed: liquid and gas. The quantity of liquid and gas is always the same. If you open the pipe, the refrigerant pressure become the ambient pressure, 1 bar, and it cool down for a short time. But then it become gas when is rising the temperature to the room temperature (about 20ºC). To dissipate the heat, the cooper conduct the heat from the processor to the refrigerant inside the pipes. Then a portion of the refrigerant that is at liquid, absorb the heat, change to gas and escape to one of the different side of the pipe. Then the gas conduct the heat to that wall and next the heat is conducted from the pipe wall to outside. At the same time a molecule change from liquid to gas, another molecule inside the pipe change from gas to liquid.

  • @kenbee1957

    @kenbee1957

    5 жыл бұрын

    Damn.... I just got schooled

  • @alexts94
    @alexts948 жыл бұрын

    Lovin the new intro!

  • @egomahlers2270
    @egomahlers22707 жыл бұрын

    Congratulation Zack for 900.000 subs !!!!!

  • @aidanc35
    @aidanc358 жыл бұрын

    do you think the discoloration could be from the heat gun

  • @Jack-hx8yz

    @Jack-hx8yz

    8 жыл бұрын

    I don't think so

  • @How2Tech
    @How2Tech8 жыл бұрын

    I was looking at that heat pipe in my teardown and thought about the same thing. I will be uploading my S7 screen removal tonight.....cross your fingers.

  • @CCScott500
    @CCScott5008 жыл бұрын

    I couldn't agree more than with Svnelvn.... You got yourself another suscriber Jerry. Thank you for taking the time to make these videos. They are fun and informative.

  • @my31and37
    @my31and376 жыл бұрын

    Your the absolute best at these type videos....all type videos even.

  • @CristianFarapon
    @CristianFarapon8 жыл бұрын

    Rip water/dust protection

  • @LucasseLeBron
    @LucasseLeBron8 жыл бұрын

    They lock together like little puzzles??? Are you sure it's not like little Lego's? I look forward to this every video

  • @AyoolaBoyejo
    @AyoolaBoyejo8 жыл бұрын

    This is just simply awesome...good work!!!

  • @rorymckenzie7110
    @rorymckenzie71108 жыл бұрын

    Wow! That demo of the OIS was really impressive. I didn't know how it actually worked.

  • @mr.pachinko5812
    @mr.pachinko58128 жыл бұрын

    Your like the Bob Ross of repair gurus

  • @dog_snax2098
    @dog_snax20988 жыл бұрын

    You are a pro.

  • @Amuaya

    @Amuaya

    8 жыл бұрын

    yep,no liquid cooling

  • @mariusANU

    @mariusANU

    8 жыл бұрын

    +Brandon M google it and you will find the real answer, 'liquid-gas cpu cooling'

  • @dog_snax2098

    @dog_snax2098

    8 жыл бұрын

    Brandon M​ I found the answer. If the phone heat up the stuff in this cooling system turn in to a liquid and the same was used for space. (sorry for my english skills)

  • @Amuaya

    @Amuaya

    8 жыл бұрын

    it's legit...I stand corrected

  • @tariq3077
    @tariq30778 жыл бұрын

    i like how you show the camera movement in the end of the 6 minutes. Never seen that in other reviews!

  • @glyn6649
    @glyn66495 жыл бұрын

    good, informative and well narrated strip down, I have a question regarding the finger print connector, will the phone still work with the fingerprint scanner disconnected? mine is damaged and will not re-connect!

  • @ibraheemmonks8866
    @ibraheemmonks88667 жыл бұрын

    I wanna teardown my s7 edge and take out the samsung logo and replace it with a glowing logo 🔥

  • @Woogoo336

    @Woogoo336

    7 жыл бұрын

    Would need a custom back for that. You could go with a metal or plastic back which imo might be better.

  • @ibraheemmonks8866

    @ibraheemmonks8866

    7 жыл бұрын

    Woogoo336 would stay with the glass on but w/ the samsung logo in a plastic material so that its slightly transparent. Searched for it in Ebay couldnt find anything tho 😒

  • @Woogoo336

    @Woogoo336

    7 жыл бұрын

    I saw on another video people saying the color on the glass can be removed/cleaned off. Not sure about the samsung logo itself but it would probably work if you could precisely remove the logo and add some kind of light that will tap into the phones power...

  • @sdqsdq6274

    @sdqsdq6274

    7 жыл бұрын

    the logo stays on

  • @CrazyCandyCrush
    @CrazyCandyCrush8 жыл бұрын

    Please on the "5s skipable Ads" on your video; I want you to earn more. Your video are awesome!

  • @joaoh.l.correa2584

    @joaoh.l.correa2584

    6 жыл бұрын

    Unfinished sentences 2017 lol

  • @kevinl3235

    @kevinl3235

    6 жыл бұрын

    Top notch video as always.

  • @DavidDubord
    @DavidDubord8 жыл бұрын

    Your videos are fun to watch and I see i'm not the only one thinking that!

  • @CharlieFisher1966
    @CharlieFisher19667 жыл бұрын

    Thanks for a really clear video...top job!

  • @DSDTNetwork
    @DSDTNetwork8 жыл бұрын

    When you open S7 edge..., will it remain IP68 protected after you packed it again?

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    No, It will not be water resistant anymore.

  • @riktamsarkar7684

    @riktamsarkar7684

    8 жыл бұрын

    +JerryRigEverything can you tell me one thing please If my phone gets heat up while playing game or doing other thing will the glass come out automatically this thing happened with my sony xperia z3 so I was thinking about this issue in s7 edge I want to buy it please answer my question

  • @aleksandrspapko3426

    @aleksandrspapko3426

    8 жыл бұрын

    +JerryRigEverything.Hi.Is any chance install s7 edge battery in note 5?!Just want to know if they have same size and connections..Thanks

  • @baujahr90er

    @baujahr90er

    8 жыл бұрын

    +Aleksandrs Papko probably not

  • @suicidesilence4444

    @suicidesilence4444

    8 жыл бұрын

    +Aleksandrs Papko they are two very different sized batteries. note5 has a 3,000mah battery while the s7 edge has a 3,600mah battery.

  • @GowthamRam
    @GowthamRam8 жыл бұрын

    i'm sure damm happy thats not my phone

  • @RinaldoJonathan

    @RinaldoJonathan

    8 жыл бұрын

    +gowtham muthukumar me too.

  • @andrescelano4179

    @andrescelano4179

    8 жыл бұрын

    +john doe they are becoming Apple V2

  • @Benswan187

    @Benswan187

    8 жыл бұрын

    +john doe lmao

  • @100subsnovideos9

    @100subsnovideos9

    8 жыл бұрын

    +Andres Celano how does this phone look anything like an iPhone?

  • @andrescelano4179

    @andrescelano4179

    8 жыл бұрын

    Big Mo I was referring to complicated internals not the aesthetics

  • @jozo035
    @jozo0358 жыл бұрын

    Great video, added to subscription list. will you dissasemble that camera stabilizer shown on end of the video? I have seen only 1-axis stabilizer so i am pretty interested in coil configuration here.

  • @stephenmoore6890
    @stephenmoore68908 жыл бұрын

    This is amazing your already tearing down the phone! Great video man!

  • @H454NP4
    @H454NP48 жыл бұрын

    Aaand the phone was sold the next day

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    Lol. I still have it. But that would be kinda funny.

  • @ayhabkhan3226

    @ayhabkhan3226

    8 жыл бұрын

    JerryRigEverything hi jerry i want to ask you something very importent can you please contact me on whatsaap 03203200357 my whatsaap number please please please

  • @tntgdh

    @tntgdh

    8 жыл бұрын

    +JerryRigEverything so, the heatpipe was destroid....any temp difference ??

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    Andre Carvalho Ive been using it since this video was posted, and no, it doesnt even get warm in my hand. (I manly use it for music, internet browsing, and Netflix.)

  • @ayhabkhan3226

    @ayhabkhan3226

    8 жыл бұрын

    Please be my teacher of mobile repairing

  • @atek1232
    @atek12327 жыл бұрын

    Why the hell am I watching this? I don't Even have Samsung

  • @amrmohamed2719

    @amrmohamed2719

    7 жыл бұрын

    atek1232 youtube fucking recommendations 😂

  • @thavrisco1632

    @thavrisco1632

    7 жыл бұрын

    IDK His voice

  • @ekinchang
    @ekinchang5 жыл бұрын

    thanks for the guide! was able to replace the battery on my sister's s7 edge.

  • @MalawijaSMITH
    @MalawijaSMITH7 жыл бұрын

    Thanks Jerri for this, it might be useful :) S7 Edge with Exynos also has heat pipe?

  • @adityakothari2583
    @adityakothari25834 жыл бұрын

    I just ruined my phone...

  • @EAGLEADITYA
    @EAGLEADITYA6 жыл бұрын

    Anyone watching on S7 Edge?

  • @kenbee1957

    @kenbee1957

    5 жыл бұрын

    Yap And that "messing up the charging port means you have to replace the whole screen" thing has me terrified

  • @miley6.915

    @miley6.915

    5 жыл бұрын

    Yup

  • @danielpierz270

    @danielpierz270

    5 жыл бұрын

    Nope s8

  • @luminumlx2604

    @luminumlx2604

    5 жыл бұрын

    me

  • @andrzejsroczynski3762
    @andrzejsroczynski37628 жыл бұрын

    thank you for this one and others as well - you are amazing

  • @T0TALED
    @T0TALED8 жыл бұрын

    Great video! Is the color (gold, silver, black) inside the back glass or can it be scratched off from the outside. Trying to decide on whether to use a case.

  • @bloatedtonydanza7798
    @bloatedtonydanza77988 жыл бұрын

    I like when you say- snap like a little lego- . Takes me to my awesome days as a child when I played Legos non stop!!. Certainly most of your viewers wont repair or disamble the S7 age... but it's like teraphy for most of us. 😆😅 thanks man!

  • @tristan0312ify
    @tristan0312ify7 жыл бұрын

    I love your sense of humor 😂

  • @MichaelVigo
    @MichaelVigo8 жыл бұрын

    I don't usually sub these type of channels but you did a great job with explanation that I had to like and SUB. one thing you left out is, will the double sided tape maintain the ip68 water resistance?

  • @ruisa5513
    @ruisa55136 жыл бұрын

    Hi @JerryEverything... one question: how about the sealing? Still maintains the water resistence?

  • @Ry_Guy
    @Ry_Guy7 жыл бұрын

    I've had this phone for 6 months and never knew the camera worked liked that. Cool!

  • @jakobh.4422
    @jakobh.44228 жыл бұрын

    Great walkthrue-video, certainly learn a lot in a very brief moment, will take a look on some of the other vids, very interesting...

  • @Sithhy
    @Sithhy8 жыл бұрын

    How much warmer does the phone run after slicing the heat pipe?

  • @douglasrhufus
    @douglasrhufus8 жыл бұрын

    you is craze man , dissambled for galaxy s7 you is my one.subscribe

  • @ARscents
    @ARscents7 жыл бұрын

    There was a dot in the screen of my s7 edge, I've given it to Samsung for display replacement. My question is whether the phone will loose its water resistance if i get the screen replaced... Since they are removing the adhesive?

  • @Chris-co3sm
    @Chris-co3sm5 жыл бұрын

    You are the best, I couldn't have done it without your help, Thank you

  • @TheNinja391
    @TheNinja3918 жыл бұрын

    Where did you get the parts for the panel and screen?

  • @_skyfall24
    @_skyfall246 жыл бұрын

    This is so cool!!! The camera moves funny... i like it xD

  • @DarkGT
    @DarkGT8 жыл бұрын

    That cooling system have holes in the design, heat much go outside of the phone like to transfer the heat true the air, if all is inside is getting boiling hot again and i guess some of the heat to the battery.

  • @B3TR0Z
    @B3TR0Z8 жыл бұрын

    Thanks for the video. Looking forward to the Samsung S7 'flat' teardown, as well as the LG G5 :)

  • @mapagMAHAL11
    @mapagMAHAL118 жыл бұрын

    nice job jerry whats with the heat pipe? i thought its only for 810 due to excessive temperature.

  • @wasiqnaeem8265
    @wasiqnaeem82658 жыл бұрын

    Awesome video Jerry, keep up the good work. One quick question though, as you've mentioned that the snapdragon 820 gets quite warm, so should I buy the exynos 8890 version of this phone (aka the dual sim variant) so that this issue never arises? Also which version would you pick, for long term usage? Thanks. :-)

  • @MythosTBK
    @MythosTBK4 жыл бұрын

    great video mate, what temperature did you set your heat gun?

  • @maui.tech.0415
    @maui.tech.04158 жыл бұрын

    You're awesomely awesome!!! Keep up the great work 👍👍👍 #team #android

  • @Mcali1984
    @Mcali19848 жыл бұрын

    Officially subbed.. Awesome video. I always took electronics apart growing up. Now, they are to expensive if I mess it up. So I'll watch you tinker with stuff :)

  • @rickyandika718
    @rickyandika7188 жыл бұрын

    after you tear it down, you use double tape to stick the back cover back in which presumably not as strong as the original? so is it still has the water resistance capabilities as the original one?

  • @MrJamboy300
    @MrJamboy3008 жыл бұрын

    man this is a bad ass video you put together. mad love going out to Samsung for this world class design

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +sheldon leslie Thanks man!

  • @Michael-Styles
    @Michael-Styles8 жыл бұрын

    You're the Man! Thnx again

  • @obadanaim6174
    @obadanaim61748 жыл бұрын

    Can you please do a test/teardown for the nextbit robin?

  • @asjadazeez
    @asjadazeez7 жыл бұрын

    Thats a very good video. All your videos are really good. on the other side i am wondering who sponsors you ?

  • @The5auza5
    @The5auza58 жыл бұрын

    felicidades exelente video me gusto mucho tu video sigue adelante haces un buen trabajo

  • @rudyroman5192
    @rudyroman51927 жыл бұрын

    the camera thing you showed blew my mind that's incredible. Well not really but still really cool

  • @AaroMesa
    @AaroMesa2 жыл бұрын

    Any idea if the board from the g935f will fit in the sc-02h?

  • @howtoit3291
    @howtoit32916 жыл бұрын

    Zack I have a question. Where are the water damage indicators on this phone? Other than the one in the SIM slot.

  • @UnSimpluJucator
    @UnSimpluJucator8 жыл бұрын

    I never knew how optical image stabilisation works, my mind is blown right now, nice video btw!

  • @ShaneEllams
    @ShaneEllams7 жыл бұрын

    hi, I've just had my s7 edge screen and back glass replaced, but it looks like there is a little gap on the back glass. like it hasn't been aligned correctly... can I fix that? or will it need to be removed and more of that double sided tape needed?

  • @sheldonbond9990
    @sheldonbond99907 жыл бұрын

    Hey Zach, so I'll be doing this repair later...Once you finish the tear down, is it just the standard "heat up and separate on the screen?" Or is there anything I need to look for while doing it? The screen I ordered from that link didn't come with the plastic frame.

  • @Roomer645
    @Roomer6458 жыл бұрын

    Great tear down and i like the way you kinda 'rush' it .. In other words you talk just fast enough, only mention the essentials and this results in a highly enjoyable professional video that most people will actually watch from start to finish !

  • @JerryRigEverything

    @JerryRigEverything

    8 жыл бұрын

    +Sergio Casino Thanks! I try to keep things interesting ;-)

  • @oblivionwaits
    @oblivionwaits8 жыл бұрын

    Showing off the OIS sensor is pretty cool. Nice job with this video.

  • @CloggingSweetyG1
    @CloggingSweetyG15 жыл бұрын

    Looking for advice on how to replace volume rocker and lock rocker. My struggle is they have come off and I'm unsure how to get new ones on.

  • @ashu1207
    @ashu12078 жыл бұрын

    Hi Jerry, can you tell if s7 edge frame is as thick as s7 from inside. I saw your s7 video where you mentioned that frame is really thick and strong. Want to know the same for s7 edge.

  • @mdjrodjevicbgd
    @mdjrodjevicbgd8 жыл бұрын

    Hi Jerry, just tried the link that you've provided for screen and it's not working. Could you please update

  • @nib95
    @nib958 жыл бұрын

    Could you tell us if the Micro SD card port has the two rows of pins to accept UHS-II, or just the one row for UHS-I?

  • @fishing4600
    @fishing46007 жыл бұрын

    Could i use the clear double sided tape that comes with the tool kit when you order a iphone screen on ebay?

  • @NexiTech
    @NexiTech8 жыл бұрын

    Install S7 edge 3600mAh battery in S6 edge plus? They look very similar dimensions. Got to compare them live....

  • @rochellekurian2082
    @rochellekurian20826 жыл бұрын

    Dear Jerry, Did enjoy video made a few notes on the same ....however I recently cracked my front screen. The phone works amazing well no flickering of the screen. My worry is if given for replacement will affect the water resistance. And whether it be same like before ? Well alot of doubt and questions on the same....

  • @bartconinckx
    @bartconinckx6 жыл бұрын

    Hi, any links for the doublesided tape? thx!!

  • @saulfelix6459
    @saulfelix64596 жыл бұрын

    Couldn't you use playing cards to pry the screen off since they are more flexible to repair the charging port? Just wondering if that's an option or just better to fully replace the screen and charging port.

  • @KairatIbrayev
    @KairatIbrayev8 жыл бұрын

    As always great video! I hope we'll see LG G5 and Xiaomi Mi5

  • @alexsmirnov9701
    @alexsmirnov97018 жыл бұрын

    Do you know if it's possible to replace the sd/sim tray, or is it integrated into the board?

Келесі