No video
G35 Goes FULL DRIFT CAR MODE!
We finally have the G35 Back under the scope to try and fix some issues we have been having the last few track days! Hopefully installing anew dual core rad from Yonaka, with some new E-Fans and the Oil Cooler will help keep it nice and cold on our next track day!
Check Out Yonaka! www.yonaka.com
THE COMMITTED CREW:
www.TheCommitt...
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2
Пікірлер: 130
Put that brace pack in over the hole into the trunk it’ll stiffen the chassis up a bit
@imnota
3 жыл бұрын
@Feyrom Take a piece of cardboard, roll it so it's a cylinder, then put it standing on a table, and try to crush it by pushing on top, it's gonna be hard considering the fact it's just cardboard. Then you can take that cylinder and punch it on the side or bend it, it's gonna be really easy since it's just cardboard. You can take thin material, and make it into a shape that will make it surprisingly strong in one way, but if you load it in ways not intended (ie punching it in the middle) the weakness of the material will show, but that doesn't take away the fact that it was strong in the way it's supposed to be loaded. But anyways, I'd like to see you punch that, it's definitely thicker than you think and you'd hurt yourself
@imnota
3 жыл бұрын
@Feyrom "It's useless dude" One comment later "It supports the seats" Uh, weird I thought it was so weak it'd bend if you looked at it wrong, how can it support seats then ? It's almost as if it was indeed a strong piece. But no need to be an asshole I just nicely explain modern sheet metal design and how they make thin material into strong pieces by modifying the shape and you're coming at me as if I threatened your family. Really shows your experience taught you well. Being a mechanic doesn't mean you have any technical superiority when it comes to material strength and engineering, that's not your domain. And even if you were an engineer I don't give a single shit about your experience, the facts are there, easy to research and prove and you contradict it with no other argument than "trust me bro i know shit", so no matter who you are you're still wrong. Also everyone on the internet is a mechanic and seems to own 12 cars, besides it's not like owning and fixing that many cars means anything I've known a lot of hacks and they could also list a bunch of cars they've owned and say they've been doing it for 25 years, yet they still were fucking hacks, not saying you're one but stop using that as an argument because it's not. Edit: btw just searched G forums about that brace and weirdly enough people there seem to agree that it's useful, there's even multiple cases of the bolts of that brace getting loose which clearly indicates that it's a piece that's regularly under stress and vibrations... You really need to stop thinking thin material automatically means it's not structural, your frame rails are not much thicker than that to be honest, it's all in the shape.
Jasmin is awesome xD Such a unique and personal build that grew the channel so much. she was the car that brought me to the channel and made me subscribe, hope to see more of Jasmin in the future man
Just drill holes in the thermostat instead of removing it completely it allows the coolant to stay in the radiator longer and help exchange heat
@kydensimpson2754
3 жыл бұрын
huh i’ve heard of removing them but never drilling holes, not a bad idea
@Nimbus.
3 жыл бұрын
I need to do this to my S12.
@BG-hg7cp
3 жыл бұрын
S12 is one car I ever regret getting rid of. I had an s12 hatch with CA20E. No power but was still a fun car to drive.
Put some windshield sprayers in front of the radiator so that it sprays on the radiator when the fans suck in air it’s cold air from the water that sprays on the radiator, guaranteed keeps the G way cooler
@fuckngreat8955
3 жыл бұрын
Or nitrous...
don’t touch the sensor by the shifter. it’s most likely the yaw rate sensor. if you unbolt it and move it in anyway the airbags will go off when the car gets started next
@AwesomeGeezus
3 жыл бұрын
same for Evo X, although it's located under the dash, but as you said don't ever touch it and just leave it in. Had my fun with exploding airbag lol
@Nimbus.
3 жыл бұрын
holy shit this is hilarious
@symonwallace1956
3 жыл бұрын
No it wont 😂 it will disable the traction control and the anti slip as its a standard 350z mod to put a switch in
@jasonheyslop2205
Жыл бұрын
VDC Is always limiting power as long as it plugged in
@user-cu2ix2cs5b
Жыл бұрын
너도 시프터로
Perfect timing for one of you're videos. Just finished getting stitches at the hospital lol. Makes this feel a little better.
Chris you gotta order that hydro soon soo we can see some sick tandems drifts on fare grounds.
Hey Robbie that part that is made in Germany if you look it says Bosch on it, they are a German company they make parts for many different cars they just have a plant in Germany that produces this part but they mostly produce inside of the us
Take a shot every time Robbie says literally or when he is stoked about something! 🍻 Excellent content man! Consider converting those pounds to kilograms too in the future. Keep up the great work!
You could just cut the carpet in half and just have the front part of it am remove the rest it would look really clean. I love that he let the door cards in and the center console, retaining all the functionality and he can still listen to some bangers while on waiting line or when drifting :D
@codysohm
3 жыл бұрын
He can bump some teriyaki boyz!
HAPPY BIRTHDAY BROOOOOO !!!!!!!
Finally been dying to see this. Love it !!!!!
HAPPY BIRTHDAY ROBBIE!!
3:01 "yonakganna lie" I see what you did there haha
For some reason i love it so much when you guys give love to that shitbox 😂 keep up the good vids, always a good time when you see a robbie video poping up🔥
Yonoka is an amazing budget friendly company. I'm using their coilovers on my 2g Eclipse GST and they sent me a tshirt, two adjustment tools, license plate bracket, sticker, and a lanyard to boot!
four bucket set baaby
put that brace back! should help stiffen the back end.
Finally come good content
I would love to see some more G35 vids!!
I have a g35 couoe for drifting and when i get to the track i take off the bumper and the hood helps a lot with heat:)
Can you guys do a headlight restor on the g
That tiny cooler is for the power steering! Nissan uses a coolant donut loop directly behind oil filter to “cool” the oil.
Turning it into a tube chassis would be pretty dope. Not sure if anyone has done that with a g 🤔
@S13tanner
3 жыл бұрын
Go find the final bout video about dab sedan, guy has a tube Fran front end with twin turbo slapped ontop the de that came in the car, wish I still had mine I just trade my sedan:(
Looking forward to the next drift event! Leaving me hanging here on the engine temp results. 😆
Until you guys get a new exhaust system I would definitely cut the other side of the exhaust out right behind the cat, I'm not one of those people that says that you need back pressure on your engine but I know that it's not a good idea to have different back pressure on 1 side than the other, it can cause damage.
put the roofracks back please 😞 it needs to be there
Put some bucket seats in the back for the ride alongs
Hope I get to meet u beauts at driven Toronto. These drift builds are looking so good and can’t wait to see more drift videos. Keep up the good work
Bro that intake filter ..... chnage it lol . An add a dam thermal spacer !!!
next on the list: making a jack point for the G
Hell yes being waiting for a new vid❤️
someone hit my car like an hour ago its good to see robbie posted put me in a better mood. :)
I wonder how much simple full cooling system flush and oil flush would help
@badsportdriving5856
3 жыл бұрын
Considering his coolant looked pretty clean, I don't think it would have done much by itself. The new rad and fans are the big improvement
Guyssssssss, put a ducktail on both of your drift cars!!!
yasmine is perfect for track day
Can you please list the total cost in the description or video for people who might be interested in building a car similar to the cars you build
Lmao I literally just gutted my 05 rev up sedan last weekend and thought the foam inserts were so weird! Insane how much that sound deadening actually works 😅 I can hear every piece of sand hit underneath now lol I love it tho
Dry ice will easily take off sound deadening
Been waiting all weekend for a Robbie video!!!!
Just ordered a Koyorad and Mishimoto fans and installed them and wish i knew about Yonaka...
Can't wait for a custom Bash Bar
The sound deadening stuff doesn’t take long to come out. Get dry ice, throw it down on it. Let it sit for 5 minutes and start chipping away
You didn’t tell us about Chris’s 350 Z
Another Drift video!? SIGN ME UP!
Those new fans gonna blowout the water pump. 😂
That thing behind the shifter is a gyroscope so when the car feels like it’s sliding or gets tapped while drifting it will usually cut almost all power.
Robbie what happened with Chris’s Z?
the box by the handbrake is the yaw sensor
yonaka-na lie, nice fluid
“Nee sans”😭
Not the roof rack 😭😭😭
@owenmoser3325
3 жыл бұрын
It looks so much cooler 😢😔
I really think that after building Jenny that you should give the same treatment to the g, since I really think that Chris deserves a solid car. A few mods like exhaust and just cleaning up the appearance can make this car a for sure favorite on the channel
HELL YES ROBBIE
Back have to watch after work:(
maybe you should consider about leaving the rear x, it kinda works like a rear strut bar
exhaustttt
Let’s goooo bro
Take the VDC module out ma boy, if you want bigger skids that's what you need to do
Give the G a bit of functional eye candy and get a carbon hood and trunk
By " around the block, does Chris mean the old 'B drive'?
What are your thoughts on a rally/winter drift car??
Hey does anyone want to help me out, I have a g35 and it’s something thats bothering em, whenever I put it in drive it clunks into gear, if I have the car in drive without going it doesn’t make any noise, but as soon as I start going it sounds like a loud whirling sound, it has a tranny code but its something about the PCM
Suddenly I wanna put this in a Nissan Quest and go for a rip
I wonder if this would be a good first car... The drift aspect... obviously
I said it about the z now im saying it about the g sounds like my straight piped 4runner
You guys should remove the rear doors just for fun and test it’s weight because I think it would be okay at track (not sure)
U coming to drivin Winnipeg on sept 11
I really want to see more of the s10❤️
FLOCK THE DASH
You can clean up the engine with some seafoam
Did the scale move at all when Robbie stepped off?
That “made in Germany” part is the Yaw sensor
haha a bag of winkys
The German part is what you can unplug to completely disable traction control and abs/vdc
why leave the AC system in?
Yo nice video
If its overheating there's other problems. Problems you have when you just mod shir and don't drove old cars you have to fix when they break
what intake is that?
Nice,But put the rear brace back in :D makes the car tighter :D
vtec rims for the Honda
Bruh my Nissan Xterra is made entirely in the US 😂
Would love to get a 6mt sedan g35. I'd trade my car for one even a stock one in a heart beat
Noooo the racks
AYEEEEE
Quick question my guy 😅 That oil cooler is for the engine or tranny oil???
@imzlowst3171
3 жыл бұрын
It’s for the transmission/power steering.
Missing the old budget build vids!
Let’s gooo
Just get some dry ice and hit the floor the sound isolation shit will come up easily and its heavy as fuck pulled it all out of my e46 and it took like 30/45 minutes
What’s up Robbie!!
He needs to unplug that yaw sensor in the center console!!! It will fully disable your vdc so your car doesn’t cut power when drifting just make sure to unplug the battery
That’s called the black box
hey robbie
Yo what's wrong with german parts?
bruh why did i forget about the Z lol
Use stock rad cap, shroud and fans, thank me later.
The G looks best with the bronze wheels. Like if you agree
Hey! How's everyones day been?
@dawsongiardino2802
3 жыл бұрын
Stellar just got home from work and new Robbie video is live.
@quinn_ryan69
3 жыл бұрын
great! about to get on my flight to seattle at 6:50 pm from kalispell, MT! i gotta get back to makin memes (i run the meme page)
Can we appreciate the music he is using for the edits, such a cool hip-hop-ish modern vibes, cof cof I don't like Shank's new rock sh1t
🔥🔥🔥🔥💯💯💯💯♥️♥️♥️♥️