Hey guys this was my Superlight that Ents worked on. He previously worked on a white XM1 for me and I could vouch that he's the best 🐐. He responds quickly and answers any questions you have. I'm super satisfied with the clicks now on my Superlight compared to stock, very tactile and snappy. Also added some Corepad Skates and white lizard skin tape to the sides. This is my endgame for the foreseeable future, highly recommend 💯

@entsfps

3 жыл бұрын

thanks so much for the comment and I appreciate the big vouch!

@king_dmj5280

3 жыл бұрын

@@entsfps how do you do the same thing with the side buttons

@entsfps

3 жыл бұрын

@@king_dmj5280 you cant they are surface mount switches

@king_dmj5280

3 жыл бұрын

@@entsfps okay

@king_dmj5280

3 жыл бұрын

@@entsfps so is it like plate from keyboards but but on mice

Nice job de-pinning those switches. I don't think people realize how tricky de-pinning a board can be without overheating and damaging things. You made it look easy lol

This is an amazing swap. I would love to get into this business if I could and soder mice/boards for other people like you.

Thanks a lot for making video, I just swapped out the switches on mine and I'm really happy with the results.

Nice job bro. You should have been a surgeon with those steady hands. Subbed.

@entsfps

3 жыл бұрын

hah thanks!

Sounds better than original switches i must admit. Hopefully they feel great too.

@entsfps

3 жыл бұрын

thank you!

Looks interesting 🤔 might have to send you mine. I like the more tactile feeling !

@entsfps

3 жыл бұрын

youll like basically any replacement switch then!

I just found your service through Google and I'm really impressed by your workmanship here. I have a GPWX on the way and I'm not confident enough in my soldering skills to swap the stock omrons to kalih 8.0's. I'll definitely be reaching out to you for a swap once I get it. :)

@entsfps

3 жыл бұрын

thanks so much! feel free to reach out whenever :)

@dwyers3636

Жыл бұрын

I know this is a two year old comment, but how did you like the new switches? Wondering if they are much quieter.

best guide without a doubt on how to do this, thanks bro

Thx for this video man. My gpx's rmb was fucking up, installed new switches following this video and it worked like a charm. Spent about $100 total on a soldering kit/switches/skates, so I saved about $50 compared to if I were to buy the mouse again, cos I really like the mouse itself lol

Man that is awesome! Love your videos, they’re very helpful and well produced. Congrats!! I have a question if you don’t mind me asking… Have you ever tried to replace the side buttons switches for the superlight/gpw? I’m having a hard time on that :(

@entsfps

3 жыл бұрын

GPW is doable they are SMT -- the SL however is SMT on a ribbon cable, aka super easy to fuck up. Haven't done it myself but doable on both, much easier on OG GPW.

@lightzicustoms8053

3 жыл бұрын

@@entsfps Awesome, thank you so much for the explanation man, you’re insane!!

@monkemonkepoopoo

2 жыл бұрын

@@entsfps what was the first song

Can't wait for you to get my ProX done. It's kinda like waiting at the auto shop on those new wheels for your car. lol. Hey Maybe you can make me Famous for the 8.0 switches being put in in a video. Anyways. Thanks again for offering this service for the ones of us that don't have the time or patience to do it. Oh and already got the core skates ordered as well from lethalgaminggear. Already in the mail so they should be in around the same time I get the mouse back. Also some BT skins too.

@entsfps

3 жыл бұрын

hope you love it when you get it back!

@Dizzybebeamin

3 жыл бұрын

I'm sending mine in also lol

I Just changed mine with succes watching your video, very helpfull, thank you.

Nice job! Are you aware of any method to get the side buttons to protrude more ?

@entsfps

3 жыл бұрын

protrude more? you can put grip tape on em. but also you can do this to make them feel better imgur.com/a/t83VSQq

Do you know if this mouse has noise problems on the mouse wheel and do you know if lubrication or replacing the encoder is removed? How many millimeters is the encoder of this mouse?

@entsfps

3 жыл бұрын

no, no idea, ents.win/switches has the answer

thanks king, very helpful o/

Great vid. I learned to solder from your guide and replaced my own switches to ttc golds. I ran into some issues though. In the start it was really easy and smooth but after the first switch it felt like my tip wasn't heating up properly. Instead of holding it against the solder for like a sec and it melts i had to hold it for like 3 secs and just hold it there until it eventually heats up and it also like hardened back way faster. On one of the pins i also had a problem where the solder was sticking to the tip so instead of heating and staying down it would like stick to the tip. Also, one where it wouldn't fully melt the solder just like semi melt so i could move it but it wasnt fully melt weird to explain. All these seemed like heat issues but i had it set to 375 degrees and it was perfect for the first switch. I just have a beginner set i got from amazon. What do you think the problem could be?

@entsfps

3 жыл бұрын

sounds like an oxidized tip, use tip tinner

@basil1596

3 жыл бұрын

@@entsfps okay I remember seeing that in your guide. So the actual tool is probably fine just buy some tinner?

@entsfps

3 жыл бұрын

@@basil1596 yup there is a layer of corroded stuff on your tip and that helps clean it up

any suggestion on how to make the side buttons less mushy? Use that button to jump in games and it really sucks now after 2 weeks of use :(

@entsfps

3 жыл бұрын

tensioners/tape on the things that click the switches themselves

is kailh gm 4.0 good for superlight shell

@entsfps

3 жыл бұрын

imo no, i like huano 80m or kailh 2.0

My right click has developed a creaky feel. Idk if the switch is damaged. I don't know much about the internals of mice.

@entsfps

3 жыл бұрын

could be

is the new logitech g pro x superlight have a good switches than the old ?

@entsfps

3 жыл бұрын

yes the new ones should not double click anymore

HELP ! I lost those metal tension springs of the scroll wheel and both Left mouse and right mouse buttons :( I am unable to click anything!

Nice video! I just did this to mine with Kailh 8.0. Any reason why you went with the 4.0 vs 8.0? Also, just so you know, I use your tip of keeping solder in the middle hole to hold and align the switch for every one I do. It's so much better than my old way of using tape to keep it in place!

@entsfps

3 жыл бұрын

thanks! and this was for a customer so they picked 4 over 8. glad the middle pin trick helps :)

@spriggan17

3 жыл бұрын

I just got my Kailh 8.0 but haven't gotten around to installing them yet. How do they feel compared to the stock on GPX?

@Guinibee1

3 жыл бұрын

@@spriggan17 Better sound and a bit more tactile. Also they seem ever so slightly faster... Like it returns a little quicker. The button just feels more snappy... Hard to explain, but very nice!

@entsfps

3 жыл бұрын

@@spriggan17 crispier

When removing the original switches, why not suck the solder off of each of the pins to remove the switches?

@entsfps

11 ай бұрын

its harder to do that and get all the solder off than to have the switch drop out then clear the solder

lmao I have had 5/5 logitech mice with Omron switches fail, at this point I'm about to start replacing them with Kailhs right out of the box instead of waiting for failure

Hello and thanks. Would is be possible to mod an MX Master 3 to change the transmission technology, to have something closer to a Superlight transmission mode ? I wanted to switch some components of the MX Board to replace them with some of a g900 or eeven a G pro X Superlight, but I don't know how to do that 8-) Do you think it's even possible to do something like that ? Thanks a lot.

Is it possible ti do something similar to deal with the scroll wheel problems ? Like replacing the « scrolling » reader ?

@entsfps

23 күн бұрын

kzread.info/dash/bejne/mZN1uZZyo9GyiNI.html&t=

@LeRatVisseur

23 күн бұрын

@@entsfps thank you for redirecting me

Hello! Please help me! The scroll wheel click(sw3) does not work on my new mouse, how can I replace the switch? Which switch to buy? Thank you!

@entsfps

2 жыл бұрын

kailh 5.5h

also quick question what switches does the UL2 cape town use?

@entsfps

3 жыл бұрын

omron 20m

Great job, I read that Kailh microswitches are shorter than Omron's so can we raise a bit of GM 8's height with bandage/aluminium band underneath the microswitch?

@entsfps

3 жыл бұрын

yes but usually not necessary

Do you have a video regarding changing the side button switches?

Why not gm 8.0?

@entsfps

3 жыл бұрын

client picked gm4

I'm dumb: accidentally used the bottom shell's screw for the M1 M2 button holes (smaller diameter). Now they're stripped. Any idea I could use to fix it?

@entsfps

Жыл бұрын

put a tiny amount of superglue on a toothpick and then spread that around the outside of the stripped hole to build back up some material

@Chuha97

Жыл бұрын

@@entsfps Thanks for the suggestion! Will try it once new feets arrive. Sounds like it will be tough because of how tiny the hole is

@entsfps

Жыл бұрын

@@Chuha97 another option is put glue then put in the screw but you need something to hold it down as the glue dries. just try to not fill the hole and you should be good

Are you able to replace the switches on my viper ultimate to a non optical switch?

@entsfps

3 жыл бұрын

no, sadly opticals and mech switches are not interchangeable

Ive had the Kailh 8.0 in my GPX for a couple weeks now but im starting to find them too stiff after long gaming sessions. I love their crispyness but its a little too stiff for my liking now. What would you recommend for something lighter? Just go back to the omron 20m?

@entsfps

3 жыл бұрын

huano 80m is lighter and my switch of choice most times

@mksteezy

3 жыл бұрын

@@entsfps Thats the Blue Shell pink dot, correct? Any vendor you recommend that sells them (US) ?

@entsfps

3 жыл бұрын

@@mksteezy mouseclub.co should have em, code ents saves you 10% too!

@mksteezy

3 жыл бұрын

@@entsfps Mouseclub isn't selling them

@entsfps

3 жыл бұрын

@@mksteezy email me, holler@ents.win

At what temp do you set the soldering iron? Scared the temp might be too high and damage the PCB

@entsfps

3 жыл бұрын

365c for everything

Did you have to have more adhesive to get the battery to stick again?

@entsfps

3 жыл бұрын

no, keep it clean and itll restick no problem

While I was taking some grip tape off of my mouse the left mouse button went out of place. It's popped back into place but I just want to know if I should be worried. It was the gpw x superlight

@entsfps

3 жыл бұрын

should be fine

Can you change switches, paracord, add grip material, and change skates in a Zygen np-01? I think the prices on your site are pretty fair and I have never modified mice before so I don't want to do that stuff.

@entsfps

3 жыл бұрын

happy to chat please email holler@ents.win

@wejvi32

3 жыл бұрын

@@entsfps Alright I will email you once I am ready to buy, this is sort of an interest check

@entsfps

3 жыл бұрын

@@wejvi32 sounds good, i can def do that all

@wejvi32

3 жыл бұрын

@@entsfps While you are here is it possible that you can actually order everything (including the mouse) yourself and then ship it because I am not repairing anything, I just want a brand new mouse with the modifications and switches replaced.

@entsfps

3 жыл бұрын

@@wejvi32 yeah but youd have to cover the paypal fee on the mouse too - you can order the mouse directly to me yourself and then pay me just for the service and save the 3%

im looking at buying a gpx sl at some point and im not sure if i should do all the mods myself or buy from a modding service and i was wondering if i have to buy the mouse and ship it to you for the service or i pay for the whole service with that you order the mouse mod it and ship it to me when all the mods are done?

@entsfps

Жыл бұрын

you should try the mouse stock first! otherwise you can fill out the form and instead of shipping the mouse to me, you can order one to me from amazon or wherever and i'll ship it back to you

@hate_genichiro

Жыл бұрын

@@entsfps ok thank you

Hi my bro in law recently solder huano blue pink dot for me. The clicks are bit heavier but I realize that my clicks for certain gun in Valorant like Phantom/Spectre shoots two bullet. I know its your main but I didn't consistently have this issue with the original stock. Now I'm looking at zippy, kailh 8.0 and ttc gold. I know you don't prefer zippy anymore but how was it originally?

@entsfps

2 жыл бұрын

go with kailh!

great vid! anyone knows the screw specs used in the superlight?

How do we contact you for commissions? I tried the site but I was confused about the email.

@entsfps

3 жыл бұрын

holler@ents.win

I have one on the way and should be to me Monday. Really debating swapping out the switches. And clue what switch feels the most like the Razer V2 optical on the viper? Really love that click feel and sound of them. Don’t know if the Khail 8’s or 4’s would be closer.

@entsfps

3 жыл бұрын

8 would be closer than the 4

@Unavenged

3 жыл бұрын

@@entsfps thank you for the reply. If I can’t stand the clicks and want to hang on to the mouse you will be hearing from me. Curious if newer copies have better side button clicks, might RMA it if so before I get anything done lol

@entsfps

3 жыл бұрын

@@Unavenged side buttons are stil bad! feel free to email whenever ty!

@Kpaxlol

2 жыл бұрын

You can even try 2s I guess ?

I live in NJ I want the lightest switches and tiny force to press. Double clicking doesn't bother rlly. On my gpx how would get it sent out or where?

@entsfps

3 жыл бұрын

ents.win/links

do you think the battery without anything holding it is going to be problem? How strong is that adhesive that comes with it?

@entsfps

2 жыл бұрын

it's ass. it falls off even stock. i replace it with vhb tape now.

@alan1as1

2 жыл бұрын

@@entsfps thanks for reply! I always think this is nothing like Logi usually do, they like complex design and over engineering, this mice is different

what kind of buttons are in the side buttons and can they be changed out or fixed?

For the tweezers when desoldering, do they go between the bottom/top of the switch legs, and pull downwards? Or do they go in a hole in the switch?

@entsfps

2 жыл бұрын

switch holes

I'll be doing this to my Superlight soon! Video is much appreciated! Is there also a reason why you typically use Kailh 4.0's vs 2.0's or 8.0's?

@entsfps

3 жыл бұрын

I use whatever the client wants. On my own mice I generally use Huano.

Is there anyway we can have you mod our GPW Superlights so they click silently almost. Would be willing to pay good money.

@entsfps

2 жыл бұрын

i could do it on the main two clicks only

@MoezillBeats

2 жыл бұрын

@@entsfps exactly what I need, how can we start.

@entsfps

2 жыл бұрын

@@MoezillBeats ents.win/switch-replacement-form/

Yo ents get the omron d2ls-11 switch to make the side buttons really crispy. Same omron switch but higher very crisp activation force with white actuator. Can you please make a video on improving the side button switch on the viper or recommend a good switch for it and aluminum tape?

@entsfps

3 жыл бұрын

are those the new omron 60m? and viper mini or regular

@tirthkachhia6650

3 жыл бұрын

Bro it’s a crispy ass side button switch for the super light. I’m talking about the small blue micro switches for the side buttons not the omron 60m and the ones I found are white microswitches. Also the normal viper

@entsfps

3 жыл бұрын

@@tirthkachhia6650 copped - i dont have a normal viper sadly. do you know if the viper and mini side buttons are similar so one mod can be carried over to the other?

@tirthkachhia6650

3 жыл бұрын

Yea they are

Is it worth it to take off the skates brand new and put core pads or tiger ice? And if so which is better in your opinion?

@entsfps

2 жыл бұрын

yes and both are great. corepads come with 2 sets tho

can i buy a replacement pcb for the superlight ? pulled a switch and its pulled some of the copper wiring running through the pcb.

@entsfps

3 жыл бұрын

no sadly

Do you have any idea how to prevent side-plays for the m1 & m2 buttons? My copy is fine, but my friend's copy seems to have terrible side-play when he use claw grip, he can actually make them overlap with each other with some creak sound. I heard people say it might happen after some time. Mine's only 2 week old, but i hope it doesnt happen to me.

@entsfps

3 жыл бұрын

RMA it unless they have the same issue using your mouse in that case they need to just use a lighter grip

I know this is kind of old, but my middle mouse button has started messing up. And I would like some red switched for the left and right click. Any recommendations on the mouse click?

@entsfps

2 жыл бұрын

mouseclub.co/products/kailh-mini-5-5h-microswitch one option for middle click

I'm not very familiar with the different switches people like to swap into mice, so which switches are these in the video? And which ones do people tend to like the most?

@entsfps

3 жыл бұрын

ents.win/faq/ :)

Ents bro, is there any way to make the LOD on it a bit higher? It is too low and i like the build and the shape

@entsfps

2 жыл бұрын

dont think so, sorry

literally bought the mouse today just to play for a few hours and find out that it double clicks. super frustrating man

@entsfps

3 жыл бұрын

rma it if it's brand new, thats some bullshit

hi, why don't you put millmax sockets on it?

@entsfps

2 жыл бұрын

1. no idea on durability, 2. you still have to open the whole mouse and ruin the feet -- twitter.com/entsgg/status/1429101206488637440

Do you find there's a little side to side vibration between the kailh gm 8.0 and the g pro wireless m1 and m2 contacts?

@entsfps

3 жыл бұрын

no

what's the model/name of the scrollwheel switch 6*6*???? thanks!

@entsfps

2 жыл бұрын

aliexpress "kailh 5.5h"

Hey brother, I have question. Say I started having the double click issue on my superlight or clicking starts messing up. With your service of switch replacements, that would pretty much fix the issue correct? I’m kinda hard on my mouse and May click too hard at times so I know I may need to fix it eventually, etc. Please let me know, because I also got friends who may be in the same situation soon with their superlights. Thanks!!!

@entsfps

2 жыл бұрын

yes it should! i use better switches, but do not warranty them as people are hard or mistreat their mice. in normal use it will last for a long time!

@PaoloMix09

2 жыл бұрын

@@entsfps thank you so much. And yes I understand, me sometimes pressing the left click hard may just be a reaction of mines or being hardcore in fights idk lmfao. But will save your page for future reference and recommend you as needed! It’s been a little over a year and my superlight still working perfectly fine so far thankfully. Cheers!

hi any chance you could show how to fix the metal on the scroll wheel ? mine broke and pinged off when disassembling.

@entsfps

3 жыл бұрын

the tiny spring?

@equinox8471

3 жыл бұрын

@@entsfps yeah i dont know where to look to buy a replacement or what I'm even looking for tbh, if I could buy one ready to go and just place it back on that would be simple enough but i haven't found anything online.

Huano blue shell pink dot vs kailh?

@entsfps

7 ай бұрын

ents.win/faq

Would would you recommend for my gpx superlight +hayate otsu new? Tiger ice or core pads?

@entsfps

3 жыл бұрын

tigver v1 or corepads

When you replace the switches do you need to replace the encoder?

@entsfps

3 жыл бұрын

no

@JackoBanon1

3 жыл бұрын

@@entsfps Would there be any gain if you replace the stock encoder with one from Kailh?

@entsfps

3 жыл бұрын

@@JackoBanon1 if its not broken, no

I've heard about the mushy side buttons in someone's long term review of this mouse. Any idea why that happens and how to fix it? I just got this mouse and I'm liking it a lot, and maybe it's only in my head, but I can already feel the left side button softening.

@entsfps

3 жыл бұрын

newer versions of this mouse have better side buttons. i dont think it would happen over time, they are like that out of the box on early copies

@caffeinecreature

3 жыл бұрын

@@entsfps Alright, thank you, I feel slightly reassured now.

Is it possible to get replacement switches anywhere for the side button switches, not the main buttons?

@entsfps

3 жыл бұрын

yeah but good luck soldering them off and onto the ribbon cable

Hey I was wondering if you can use other switches on it to customize like razer's optical mouse switches, I love the feel of them but don't like the feel of others. I was wondering that if i sent my gpro and the razer switches that those could work instead

@entsfps

2 жыл бұрын

optical switches can not be installed after the fact. the mouse must be designed with them in mind from the beginning

@samuelhollenbeck5472

2 жыл бұрын

@@entsfps Ok, thank you very much

@entsfps

2 жыл бұрын

@@samuelhollenbeck5472 np sorry for the bad news. new viper is coming out soon and it looks amazing -- better side buttons, no rubber grips

@samuelhollenbeck5472

2 жыл бұрын

@@entsfps No worries I looked at other switches and have decided to use other ones, your tutorial helped very much

Is it possible to change the side button switch?

@entsfps

Жыл бұрын

yes but not with a full size switch

@Ents I want to replace the middle mouse button/switch because it doesn't always activate when I press down on it. Would you be able to tell me what kind of switch or button the GPX uses?

@entsfps

3 жыл бұрын

5.5h square button you can also send it in to me and i can replace that, its on option on my order form

@lunchbox437

3 жыл бұрын

@@entsfps Thanks for getting back to me! I'm pretty comfortable with a soldering iron, already replaced the main switches w/ ttc golds, but good to know its on your order form. Keep up the awesome work!

@entsfps

3 жыл бұрын

@@lunchbox437 mouseclub.co/collections/microswitches/products/kailh-mini-5-5h-microswitch this is the one you want ! use code ents to save 10% :)

Hello , i want to ask you where i can find top key lef or right sided buttons for Logitech G Pro x superlight wireless (black) ? Can you help me cuz on my mice left top key button is almost to broke ?

@entsfps

3 жыл бұрын

the plastic or the switch? i dont understand

@hao_10

3 жыл бұрын

@@entsfps Im talking about the left top button which we use to click always if we want to open something. Im not talking about the switch but only the plastic button we do always press all the time. Mine is about to me broken and thats why im looking for it everywhere.

@entsfps

3 жыл бұрын

@@hao_10 not a commonly available replacement part sadly

How many millimeters is your screwdriver? Your screwdriver size?? Please

@entsfps

2 жыл бұрын

answered at ents.win/gear

I dont know to much information about switches and this stuff, so I have a question, what do the Kaihl switches make to the GPWX to not double clicking?? The Kaihl switches are just better switches than the stock omron? Psdt: I am not an english speaking so I hope u can understand my question

@entsfps

3 жыл бұрын

they have a coating on the parts that touch eachother that helps prevent double clicking. new gpwxsl does not have the double clicking problem like the GPW did bc they changed the switches. people are changing switches in gpxsl for the feeling

@isma--

3 жыл бұрын

@@entsfps So, in the new GPWXSL it's not necessary to change the switches because they don't have this issue, unless u want the feeling. And in the case of GPW u must change them because sooner or later they are going to present this double clicking issue right?

@entsfps

3 жыл бұрын

@@isma-- correct!

@isma--

3 жыл бұрын

​@@entsfps ty 4 the info man, you do such a nice work

@entsfps

3 жыл бұрын

@@isma-- thanks so much, much love to peru

How much do yo charge for this service?

Hey man, what encoder height should I get for the pro x superlight? I don't know what the stock encoder height is.

@entsfps

3 жыл бұрын

p sure its 8mm

@IrrelevantJohn

3 жыл бұрын

@@entsfps thanks! Hopefully I don't screw up the soldering.

How hot you set up the soldering iron?

@entsfps

3 ай бұрын

ents.win/faq/

Can you explain and make a tutorial on why the side buttons are mushy?

@entsfps

3 жыл бұрын

imgur.com/a/t83VSQq

@meibae7145

3 жыл бұрын

@@entsfps Thank you very much! I'll get my corepads mouse feet soon, one question tho I've never opened a mouse before and after reading thoroughly your tutorial I don't think it's difficult I'm just nervous about the ribbon cable how fragile it's and how easy it's to release and re-attach to the ribbon door

@entsfps

3 жыл бұрын

@@meibae7145 kzread.info/dash/bejne/pmeZxa2pXdixmKQ.html :)

@meibae7145

3 жыл бұрын

@@entsfps Once again much appreciated for the help, keep the great work man!

@meibae7145

3 жыл бұрын

After waiting for all my things to arrive in order to make the mod I had a defective battery on my mouse so I had to replace it and after testing for 4 days the new mouse battery I finally did the mod following your instructions and oh man it was hella worth was really pressured to not fuck up 150$ mouse I struggled at releasing the ribbon cable but then found a tool that does it with no harm and 100% success rate the rest was basically ant work no rushing slowly cutting pieces testing back and forth that everything is fine I was satisfied with the result and was struggling once again with the god damn ribbon cable and after applying the new mouse feet everything works fine there's a slight rattle (I can hear it from the front of the mouse) but it's good enough for me so once again massive help much appreciated!!!!

my middle click is kinda broken. what do you recommend to replace yah?

@entsfps

2 жыл бұрын

kailh 5.5h

What soldering wire do you recommend for this job, or does it not matter?

@entsfps

3 жыл бұрын

ents.win/gear

How to change side switch ?

@entsfps

10 ай бұрын

video coming soon

@Staynetawan

10 ай бұрын

Thanks in advance

Do you ever done the middle scroll wheel switch button replacement?

@entsfps

3 жыл бұрын

so much so that it's an option on the order form ents.win/gpw-switch-replacement-form/

@MrKaidemvp23

3 жыл бұрын

@@entsfps I wish to sent out for your repair but I done it myself to replace the M1 and M2 button already. And follow your instruction and guides for tuning the side buttons and it works very well. Just the middle scroll wheel clicks that is very annoying and cant find it online anywhere in my country, Malaysia.

@entsfps

3 жыл бұрын

@@MrKaidemvp23 its this mouseclub.co/collections/microswitches/products/kailh-mini-5-5h-microswitch

I CAN'T DO THIS :(

@entsfps

4 ай бұрын

I can! ents.win/switch-replacement-form/

@algo2957

4 ай бұрын

@@entsfps I live in pakistan lol

@entsfps

4 ай бұрын

@@algo2957 you can learn my brother 🇵🇰

Can the side buttons for the super light be modded?

@entsfps

3 жыл бұрын

twitter.com/entsgg/status/1355183591462998016

do newer models have no double click? or is it on all models?

@entsfps

2 жыл бұрын

they have g1 switches on all new logitech mice

where can i buy swithes for mouse ?

@entsfps

3 жыл бұрын

ents.win/links - mouse club

Do you think its possible to change my superlights scrollwheel to something similar to the vipers?

@entsfps

3 жыл бұрын

the wheel it self or the feeling when it scrolls? more or less tactile?

@Kizinky

3 жыл бұрын

@@entsfps well i would say the wheel itself bothers me more as im used to how low profile the viper one is. But also like the scroll feeling in the viper more too.

@entsfps

3 жыл бұрын

@@Kizinky lowering the wheel isnt possible, but making it smoother is

@Kizinky

3 жыл бұрын

@@entsfps could you change the wheel out for maybe a smaller one?

@entsfps

3 жыл бұрын

@@Kizinky if you have the patience to look buy and test a smaller diameter wheel, sure

Where can I buy the feet of G Pro Superlight? Is there a website?

@entsfps

3 жыл бұрын

lethal gaming gear

Your mouse got broken or u just want to replace the switches?

@entsfps

3 жыл бұрын

just wanted to replace them

Hey can you get spare side buttons to purchase?

@entsfps

3 жыл бұрын

yeah www.aliexpress.com/item/32976422040.html

I wonder what temperature you use when desoldering?

@entsfps

2 жыл бұрын

365c

@letsgobrandon6545

2 жыл бұрын

@@entsfps thanks a lot. Your technique w chisel tip is brilliant. At least for newb.like myself

nice vid, but holy shit this does not seem wroth the effort

@eazydeezy5324

3 жыл бұрын

This was for a customer so he is getting paid

@entsfps

3 жыл бұрын

@@eazydeezy5324 it's true, and if it looks hard, send it my way and ill do it for ya

Are Kailh GM 8.0 copper plated or gold plated?

@entsfps

3 жыл бұрын

ents.win/switches info on the changelog page

What is that plastic tool called that you're using?

@entsfps

3 жыл бұрын

spudger! ents.win/gear/

@Foxy_proxy

3 жыл бұрын

@@entsfps Nice, thanks!

does the mouse have optical switches?

@entsfps

2 жыл бұрын

no

Is it the same pcb like the normal gpro?

@entsfps

3 жыл бұрын

no

@enox-95

3 жыл бұрын

@@entsfps ok so i cannot replace it with old pcb

@entsfps

3 жыл бұрын

@@enox-95 answered in the video at 1:38

Website isn't working :(

@entsfps

3 жыл бұрын

working now!

Website isn't working "/

@entsfps

3 жыл бұрын

twitter.com/entsgg/status/1347730092349390849

@entsfps

3 жыл бұрын

website back up

lol pays 200 dollars for mouse and is putting new switches in it. what a fail

@entsfps

3 жыл бұрын

switches were fine but some people prefer a heavier click feeling

@johnadona3014

3 жыл бұрын

@@entsfps Can you put some optical switches in my razer copperhead

@entsfps

3 жыл бұрын

if it has mech switches - no. they are not interchangeable

expensive mosue with cheap switch.. omg logitech wtf

@entsfps

3 жыл бұрын

the new switches are fine!

@gilbyska6126

3 жыл бұрын

@@entsfps yeah, but i hope logi wanna put some expensive switch on their mices, maybe like a kailh GM 8.0 :/ , i just randomly searching people who changes this mice switch, cause i wanna see is that mice still using white / blue omron, and this video has answered my question

@entsfps

3 жыл бұрын

@@gilbyska6126 glad it could help!

@gilbyska6126

3 жыл бұрын

@@entsfps yeah 100% legit