You're very patient. Your description is very accurate and precise, thank you. Very helpful.

Excellent , been waiting for these .Thank you Ernest , very informative and helpful

Great sir

is that a old style valve housing?? on my 177 it got 3 big windows down the side?? and can i change the valve seat??

I have an impact (2017) and i bought the update part ( B30 19605 valvehouse) to install it on my impact. The problem that i find is that the outside diameter of the valvehouse is bigger from the old one so it doesent fit in the rear block impact (B21 19698) . What i need to know is that the new B21 has a bigger hole for the valvehouse ? Also if i order a new B21 do i need any other parts for the installation to my impact? Thank you very much sir.

Is the Swedish release of the Impact X (10 joules) permanently restricted power-wise in anyway ? For instance, I CANNOT move the valve spring adjustment knob under the barrel ( the one which shows the four lines),,,, Is this readily movable in the `normal`version ?

hi fx airguns , i want buy an fx impact mk3 in cal 177 4,5mm i have a question about the impact , how much shots can shot the impact mk3 in cal. 177 4,5mm with the original 480cc bottle in 7,5 joule ? and how much shot can shot the impact with the 580cc carbon bottle also in 7,5 joule in cal 177 4,5mm ?? and the fx impact mk2 in cal 177 4,5mm in 7,5 joule how much shots shot with 480cc bottle and with 580cc bottle pleas help

I didn’t see anywhere in the disassembly where and how you removed the valve assembly from the back of the gun. Can you show this?

@FXAirguns

5 жыл бұрын

Steven, looks like that part of the tutorial got left out in editing. To remove the valve housing you 1. unscrew rear block from valve tube 2. remove regulator pressure gauge 3. remove valve housing set screw 4. slide valve housing from the rear block.

Hi, could you please do a Masterclass of the Dreamline, it would be fantastic! B, Regards :)

Hi, my fx impact x was accidentally fired while it is still in open bolt. An o-ring flew out from I don’t know and i felt the air going out and into my face. I think it came from the valve seat? I did not fire again. What the hell had happened. Help please.

@nickjones6791

3 жыл бұрын

More than likely just the probe oring that seals the probe into the breach when loading a pellet. Easy oring to replace

இந்த ஏர் காண் என்ன விலை உங்க நமபர் பொடுக

What are the symptoms if that part is cracked, the valve seat.

@FXAirguns

2 жыл бұрын

Please Call our customer service or visit our website to create a support ticket at Fxairguns-usa.com

Will I void my warranty if I follow these videos and cock it up?

@FXAirguns

5 жыл бұрын

No, working on your FX rifle will NOT void your one-year warranty.

I didn`t realize FX only makes only ONE rifle thats worth doing a masterclass for,I guess all the other owners of other models of FX rifles don`t matter.

@Cupillac

5 жыл бұрын

There's more to come lol .... they can't make them all at once

@FXAirguns

5 жыл бұрын

Crown and Wildcat Masterclass videos are under production! Planning on releasing those in October.

Give me one as a gift 🎁 🤗😂