Thank you a lot for sharing your experience once again. This is really helpful.
@omatad6 жыл бұрын
Could you plz do a FAC guide on the Royal? Would be awesome!
@Gentleman20197 жыл бұрын
Ernest please tell us where we can purchase the 58mm hammer spring.
@vbogstandard5723 жыл бұрын
do you replace it with a weaker spring or stronger spring to get more power
@drmeemo06 жыл бұрын
hi friend i have a question and i hope you can helpe me or guide me, my fx impact cal25 gen2, suddenly give me low fps, shots well is acurrate and the veolcityes are consistens, but star give shots always under 700 fps, the seatting in wheel ajuster are in max, and i move the regulator 140 to 150 bar. but stay under 700fps. thanks, sorry for my eanglish.
@Swede4Trump
6 жыл бұрын
May the change be colder weather? The impact has a part called a16 . if its a rubber ring and not a spring, you will get that effect - my impact doesent even work under +-0 Celsius
@Osmar__Sosa7 жыл бұрын
Hi, I want to know where I can buy the Wika gauge that you see in the video
@gogle
6 жыл бұрын
edgun gauge
@saifyaroubi66465 жыл бұрын
What type of Allen key to use for the screw? I tried 1mm and 0.9mm hex and both didn't work
@tropicthunderbolt
5 жыл бұрын
Where did u find a 1mm. I've tired everything and I cant get it.
@achillesphillbalbuena8106
4 жыл бұрын
tried 0.9 and 0.7 didn't work..i think it's 0.8
@tropicthunderbolt
4 жыл бұрын
@@achillesphillbalbuena8106 come to find out. The new ones (mk2) just unscrew. No allen needed.
@achillesphillbalbuena8106
4 жыл бұрын
@@tropicthunderbolt so it will last longer already until the C3 bumper o'ring will crack, if i'll only use red locktite? I'll try..thanks..
@tropicthunderbolt
4 жыл бұрын
@@achillesphillbalbuena8106 my c3oring lifted up on the plunger and my hammer broke the rod off in the plunger..lol.. so fx is sending me a whole new one rod,plunger ext..I already got the new delrin c3 bumper ready to install.
@vbogstandard5723 жыл бұрын
can you do a vid on how to remove the anti tamer on the uk verion ppplllzzz
@robd.52637 жыл бұрын
what gauge do you have on your fx impact? what's the model number?
@ernestrowe5061
7 жыл бұрын
Wika 111.12.027 315bar G1/8B
@Osmar__Sosa
7 жыл бұрын
Hi, I want to know where I can buy the Wika gauge that you see in the video
@sniperndeso56482 жыл бұрын
Cek Bos q 🙏
@dmorris1992127 жыл бұрын
where do you purchase the hammer spring parts from
Пікірлер: 22
Thank you a lot for sharing your experience once again. This is really helpful.
Could you plz do a FAC guide on the Royal? Would be awesome!
Ernest please tell us where we can purchase the 58mm hammer spring.
do you replace it with a weaker spring or stronger spring to get more power
hi friend i have a question and i hope you can helpe me or guide me, my fx impact cal25 gen2, suddenly give me low fps, shots well is acurrate and the veolcityes are consistens, but star give shots always under 700 fps, the seatting in wheel ajuster are in max, and i move the regulator 140 to 150 bar. but stay under 700fps. thanks, sorry for my eanglish.
@Swede4Trump
6 жыл бұрын
May the change be colder weather? The impact has a part called a16 . if its a rubber ring and not a spring, you will get that effect - my impact doesent even work under +-0 Celsius
Hi, I want to know where I can buy the Wika gauge that you see in the video
@gogle
6 жыл бұрын
edgun gauge
What type of Allen key to use for the screw? I tried 1mm and 0.9mm hex and both didn't work
@tropicthunderbolt
5 жыл бұрын
Where did u find a 1mm. I've tired everything and I cant get it.
@achillesphillbalbuena8106
4 жыл бұрын
tried 0.9 and 0.7 didn't work..i think it's 0.8
@tropicthunderbolt
4 жыл бұрын
@@achillesphillbalbuena8106 come to find out. The new ones (mk2) just unscrew. No allen needed.
@achillesphillbalbuena8106
4 жыл бұрын
@@tropicthunderbolt so it will last longer already until the C3 bumper o'ring will crack, if i'll only use red locktite? I'll try..thanks..
@tropicthunderbolt
4 жыл бұрын
@@achillesphillbalbuena8106 my c3oring lifted up on the plunger and my hammer broke the rod off in the plunger..lol.. so fx is sending me a whole new one rod,plunger ext..I already got the new delrin c3 bumper ready to install.
can you do a vid on how to remove the anti tamer on the uk verion ppplllzzz
what gauge do you have on your fx impact? what's the model number?
@ernestrowe5061
7 жыл бұрын
Wika 111.12.027 315bar G1/8B
@Osmar__Sosa
7 жыл бұрын
Hi, I want to know where I can buy the Wika gauge that you see in the video
Cek Bos q 🙏
where do you purchase the hammer spring parts from
must complex gun ever