Happy New Year!

I'm trying to install gyro in my plane its a cortex with my T18SZ. I want to assign SE switch to Stabile flight and hold with LD and RD dial to fine tune do you have a video that would help?

keep the 18sz and 16sz how to videos coming, Thanks

@radiocontrolshop

2 жыл бұрын

Hi Kev, glad you enjoyed the video. Look out for the upcoming episodes coming on this channel. Do subscribe to our channel to get the updates. Thank you.

Hello. Excellent video. Question? Can I use the same procedure on a turbine jet? If I am right, I can program a condition as cruise and all trim adjustment will be safe in that mode. For example if I assigned a second condition as landing, the radio will save the trims adjustment as well.?Thanks

@radiocontrolshop

5 ай бұрын

Thank you. Glad you like the video. Yes, you may use the condition set up procedure for your other types of model. Single/separating the trims would be important. Most important is to perform the ground test of the conditions prior to taking off.

hello, can you put speech or voice for different switch position, for example dual rate aleron

Olá esse rádio dá para programar vozes para cada condição no swith??

Hello Ronald. Your videos are all really helpful. However, I have an interesting and identical problem on two of my gliders (Volantex ASW28 and Robbe Monsun) with the conditions setting. Switch C is set for cruise, thermal, and speed (as you show), at up, mid and down respectively. This works fine, except that the thermal and speed settings also activate the motor (both motor and throttle cut are on SD). Why? This is a little disturbing. Do you have any suggestions about how to remove the motor connection to SC, or even why it it there at all? I can see no other SC allocation, so there is no logic to it. (I can't recall if I copied one of these glider settings to make another. Do I need to delete them and re-do them?) Thanks very much, Scott.

Is it possible that de transmitter tel jou what conditions you have chosen with the speaker?

@radiocontrolshop

2 жыл бұрын

Dear Benny, it is not possible at this point in time. Apologies.