I have a quick question re turning. I've got a job that has a 50mm spherical bore using a 8mm button tool it's pre drilled with a 15mm drill. But I'm struggling with a pip tools on centre line. It works on nx but not on fusion any tips would be welcome.

Lars, will make slotting operation on cam ??

Hey Lars, I'm getting the warning message "Warning: Cannot Plunge Outside of Stock" during a 2D pocket operation, I can't seem to figure out why or find any information on that the error message entails. Any advice would be much appreciated!

Lars I have just set up my lathe which runs mach 3 can I use fusion turn with it ? why can't you live next door bud

hello doosan puma 2100 mb i am making a fusion 360 cam but it sends g code to y do you have any idea there is no y axis

I have a turning project that constantly stumps me. Any chance you can take a peak? Just trying to skim cut the face profile of a solid stock.

I am using Fusion 360 and need a post processor for mach 3. Is it possible to add this to the list of post processors available. The only internet access I have is through a mac computer and I can not open the download. Will fusion 360 be adding a processor for mach3 turn as it seems a lot of people are struggling. PS absolutely love your channel, clear and easy to understand. Keep it up please.

@cadcamstuff

5 жыл бұрын

Google Autodesk Post Processor library and you should find one

@airgunningyup

3 жыл бұрын

same issue , f360 doesnt seem to work well in either diameter or radius mode.. it travels to far in one direction either way

My turn mill lathe showing illegal plane while program run in 2d contour

How G1G2 option in fusion 360 generate G code please reply

Lars!!! What are you printing behind you??

Will mill turn work on a Tormach 440 with small parts held in the spindle?

@miguelzambranojr

4 жыл бұрын

Check mill as a lathe using G52 from Jonh. He modify a Tormach post