Rex, in my estimation this is hands down one of your BEST videos. You really make the chair come to life with your incisive detective work. And now I can’t wait until you build your interpretation of the chair! Just great, great work, my friend.

@periclescosta2068

2 жыл бұрын

Rare as heck seeing a guy so skilled and so passionate about his trade willing to share all this knowledge. It takes a while but KZread recommendations sometimes bring forth gold.

I knew a fellow who made Windsor chairs. He dried out the ends of the rungs by sticking them in warm/hot sand. Then as you said Rex, when they normalized to usual humidity, they locked in.

This video is the perfect example of why i subscribe to Rex’s channel. You want a real deep dive into wood working? Ok. Rex will take a discarded chair made from green wood and break down many of the choices the craftspersom made to make the chair and why they did it. MASTERCLASS.

Rex, I was almost sad when you got the spreader out to spring that joint. What a testament to the craftsman who built the chair. Great video as ever.

Great video!!! FYI, ladderbacks were often used as “walkers” by toddlers learning to walk. They would lay the chairs down on its back then would stand between the legs for support. Many older ladderbacks will clearly prove they were used for this purpose because they have flat areas on the back of the posts. This occurred after generations of kids learned to walk using the chairs for support.

@RexKrueger

2 жыл бұрын

Holy crap! Really?

@blackraven8805

2 жыл бұрын

@@RexKrueger Yep different types of chairs and stools have been used for that purpose along millenia.

This is such a great idea for a series. Find an old woodworking design, explain the woodworking and attempt to replicate it with better techniques.

In addition to the exercise of building your own version of this lovely chair, I was wondering if you were planning on refurbishing this one and giving it another few decades of life. Your neighbor might be surprised to see her old chair with a nice new seat and cleaned up with a layer of oil to preserve the lovely wood patina.

@Russ0107

2 жыл бұрын

I think rex prefers making over restoring.

@imperialphoenix1229

2 жыл бұрын

@@Russ0107 have you seen his tools?

@harindergill7221

2 жыл бұрын

Good idea.

@interchangexVP3

2 жыл бұрын

That's a lot of oxidation. I don't do this kind of stuff so I don't know what it would look like after being cleaned and degreased and hit with some BLO. Not sure where the line between patina and weatherbeaten is. :) Obviously subjective. The sentimental value would make it worth considering even if it wouldn't add collector value.

@ktaragorn

2 жыл бұрын

Me too! Atleast a new seat would have given it more use in the garden, and I imagine more strength..

Great job, furniture detective. The green woodworking is really clever. The closest I got was fixing a dry handle on green wood mallet head and that was just on a whim. I use the mallet for a few months now, pounding on holdfasts and what not, it didnt move yet and judging from the chair, it probably wont move any time soon :) Cant wait for your recreation video

Rex, I love your videos. I especially love the videos where you break down the history of the piece based on the evidence the Craftsman left behind. It is simply amazing and gives me a greater appreciation for our craft.

Can't wait, Rex

@funmanteddy2726

2 жыл бұрын

didn't expect this

Excellent forensics of a surprisingly not so simple chair. Congratulations

I like the fact that the maker used marking lines as an actual feature. It really does make the piece more interesting and organic, more 'human' than we ever see in modern furniture. Very, very nicely done. Also saves time getting rid of marking lines...! 😐

Rush seat material is still available. That is an art in itself. Wedged tenons in blind mortises are also used. Wedge has to be just right of course. It is also a good repair technique. Some of your best most informative work.

I can well believe that there is no glue. I was doing a project where I needed to dowel the joints but the dowels needed to be twice the length of the premade dowels. Thought buy rod from the the big store and cut to length. The 10mm Tasmanian Ash didn't fit really well so after I ran the callipers over it and it was 9.67. I cut a length longer than needed, drilled a 9.5 hole chucked the dowel into a drill and drilled the dowel into the joint. The speed and friction forced the dowel in far enough to finish off with some energetic pounding. No glue but rock solid with 1.67 mm. Years later tried to disassemble couldn't even shift it with a sledge hammer had to cut the joint off.

That's a very nice project for the autumn. I'm sure it's going to be super useful to get even more familiar with wood shrinkage, movement, fiber structure and more. I'd like to try it myself one day.

Thats neat, I never thought a chair could look so ghostly lol. I guess it being so masterfully constructed is one of the reasons it was able to weather the effects of decomposition and get to that ghostly state so well

Forensic woodworking! I love these videos! You never see anything like this on youtube! Keep on keeping on, buddy! Best idea yet

I absolutely LOVE these videos where you do Furniture Forensics. Keep them coming!

These are BY FAR my favorite.

I would like to see you do a whole video on how the wood shrinks and swells, I know others do this, but you have a talent for explaining things esp the part about how it swells crossgrain in one direction but not the other, that seems to defy nature

Furniture Forensics - what a fantastic name. Well done

I couple of decades ago our family lived in Rocky River and Westlake, Ohio. On my way to the bus stop I’d find old and very ole chairs out on someone’s tree lawn or at garage sales. I still have many of them in our Utah home. A daughter counted some 50 chairs in our home at one time. Now I understand a few of them better. My thanks to Dr. Kruger, the chair archeologist. Fascinating.

Great job again Rex with the video. Last week I got my lathe fixed and also my electric chainsaw so now I’m back to making bowls.

Hi that's real impressive. Our ancestors had a lot of knowledge of using different grades of wood, and how to combine them, to get sturdy furniture or anything else. Thanks for bringing this topic up

I was pleased to see this video. I recently got a small ladder back chair like this that has been in the family for ages. It was covered in multiple coats of paint and had a hickory bark seat that was in bad shape. After stripping the old house paint and what appears to have been red and green milk paint I uncovered a chair like yours. It is short, only 33 1/2 “ tall with a 16” seat height. It also has layout lines scored in the turnings like you described. It is a very sturdy little chair. It came to Michigan from eastern Ontario, but I was told by my mother that it was originally from Ohio or Kentucky.

@glenwalls2685

2 жыл бұрын

After I painted the chair with 2 coats each of red and blue milk paint, I redid the seat with blue and white Shaker sear tape. Good as new.

I wonder, in a couple of decades, if Rex's grandson will make a video on an IKEA chair he found in his neighbour's garden 😄 Really interesting stuff, Rex!👍

Love these forensics videos. It’s like a woodworking video with a healthy dose of antiques roadshow and how it’s made mixed in.

These old chairs hold so much interesting information, thanks for sharing Rex!

Also holy crap I love that joint and you taking us in these journeys! The sides sliced off the round tenon what really got me. Grain orientation is an alchemy of it's own!

@philrobbie1670

2 жыл бұрын

yeah that was a real lightbulb moment, very much looking forward to a build video

50 years ago was 1971, IKEA started selling their own furniture in 1955. I would guess that this chair is much older than that. Did the traveling green woodworking trade still exist then? I would not be surprised if this chair was dated to sometime during the late 1800.

@MJ-nb1qn

2 жыл бұрын

Well, he’s a kid so that may explain a bit. The human brain is not fully developed till about age 25.

@matts.8342

2 жыл бұрын

@@MJ-nb1qn Uh, what?

I found your channel through furniture forensics on that dropleaf table a year or so ago, and I am so happy to see furniture forensics again here! I love hearing the stories of these vintage and antique pieces, and your explanations of the factors behind the features.

Yet another fantastic video with clear explanations. I've been reading the latest "Make a Chair From a Tree" and I think this video is a great way to show some of the why it works. I'm looking forward to your chair.

This is a most excellent segment. Maybe your best. It is an excellent breakdown of of this chair to incredible detail. As a spindle turner who has made a number of modern variations, you nailed. it. Can't wait for the K-chair!

@jflemingsandiego

2 жыл бұрын

BTW - consider Shaker tape for the seat. I have done both. You could use it on a refurb of this chair too, but I'd be inclined to do fibre rush as a more historical restoration.

I found a rocker from 1880 in the top of my shed. My uncle redid it so I could rock my baby. Man, you just can't beat it. Love the content!

Rex, that was a fascinating analysis of what went into a seemingly simple construction. Brilliant. Are you considering restoring this frame? It deserves to brought back to its original glory.

Only you could take a broken down old chair and turn it into the most interesting part of my day!

I really enjoy your forensic videos. They've made me think more about the old furniture around me and the craftsmen who made them long ago.

I'm excited to see you figure it out!

Thanks for another awesome video. This will really changes the way I look at the furniture I make. Keeping that balance between durability and beauty is so important.

There was little information in this new to me; I watch because i like to see Rex discovering these things. It reminds me when it was new to me. The tone of amazement and the joy of discovery are worth my time.

Another cracking video, truly amazing and look forward to seeing your version

Hey Rex, Your understanding and explanation of the engineering practicalities of this chair is marvellous. Thank you so much!

I absolutely love it when you do this type of video! This one may be the best yet!!! BRAVO!

I still have 6 similar chairs my grandfather made before the 40s when he died.. up until the early 70s we had a few big rocking chairs made in the same basic design.... gives me an idea for a project now..

I really enjoy and appreciate these types of videos. The detective work, the explanations on how and why things were made the way they were and all the historical context are extremely interesting to me. Thank you so much and take care!!

I love videos like this, Stumpy Nubs has one like it as well. I feel the history of our craft often goes underapreciated

this really was a fascinating video, and makes me want to try to build one, looking forward to your next vid

Super cool! So much knowledge hidden in such an understated piece. Thanks, Rex.

I love your furniture forensics videos. Great research as always.

Love your furniture forensics!!I’m learning so much !!

The history and science of woodworking, I love it!!!!

Looking forward to see your effort on this

Thanks for the CSI on this chair. That was real interesting learning about how this greenwood chair was made. God Bless.

Good ,looking forward to seeing your chair build

I always love the Furniture Forensics videos.

Rex, Really great video!!! I learned a lot from this video and I want you to thank you so much for taking the time to truly delve into a piece of "junk" furniture and truly exposing what great piece of furniture it is and what makes it features such a great example of joinery!!! Thanks again Rex!!!

This is such a good video. I'm really enjoying the history videos and this is my favorite so far. Beautiful chair, great analysis, wonderful storytelling

I must admit I didn't watch this all week because I thought the subject would boring and irrelevant to my woodworking. Well, I was oh so very wrong. Your forensic breakdown taught me so many different tremendously relevant techniques and things I will take into consideration when woodworking from here on out.

I was holding my breath when you sat on that thing! Agree with others, this was one of the best vids I've watched and learned a lot from it. I know it's only one of the "types" of videos you produce, as it should be. I don't think they should all be furniture forensics, but as noted, we can all learn a lot from the past. Well done Rex.

Just wanted to say thank you for all you do. I watch a number of woodworking channels and you are the best. No fluff, but real substance. Thank you.

Love these breakdown videos!

Great episode. Thank you!

Your forensic videos are awesome. Please do more of this kind.

Well done Rex. I'm excited to see your work making this chair. Your videos are always a pleasure to watch. I've learned a lot already in the last few weeks since I found your channel. Thanks for the awesome videos!

Wow man I know this is an old one but that end speech was awesome! I can't agree more on every point. The only power tools I still use are my table saw for long rips and my skilsaw for big processing and I couldn't be happier.

Rex I found your channel only a few weeks ago and watched almost every video. I must say you're an awesome creator doing really cool stuff thanks for being so entertaining. I even picked up a t-shirt.

This scientific analysis is just outstanding. You are approaching Roy's level of understanding and explaining findings. I feel great comfort and hope now for the woodworking future!

Very nice chair!!!! Very good break down of the way it was made!!!

My GGgrandfather, and later Ggrandfather were chair makers in Wheeling WV(then Virginia) from 1820's-1860's. Fort Wheeling at the time was a major stop for those heading west, so there was a huge demand for furniture that people could strap on their wagons for the trip. What I wouldn't give to be able to own one of their chairs, or at least touch one! Great video!

Looking forward to seeing the recreation of this, especially after you dug into the secrets of construction. It's quite an impressive piece of furniture once you delve into it, even more so when you realise how much neglect it has simply shrugged off.

Our dining room table and chairs is a set of lots of these chairs and a harvest table that my Grandfather made. (He lived in NE Connecticut). The seats of our chairs are made with some sort of twisted paper it looks like. I'm a big boy, over 300, and these chairs hold my weight. I have memories of this table and chair set in my Grandparent's house in the early 1980's when I was very young. I do not k ow how much further they go back. But I will say that no other piece of furniture I've ever owned lasted more than 5 years, especially with my 3 boys... and these chairs are still strong.

Love it, love it, love it. Can't wait to get going on the chair! I will watch your deep dive on this chair again and again. I still need to understand joint shrinkage and the relationship to the stretchers.

The passion for your craft really shines in a video like this one. The study, thought, and depth of woodworking lore is impressive. I don't find that elsewhere, sure like seeing it here. 👏👏👏👏

When there's been a Home Decor Crime, you need... Rex Kruger, Furniture Detective

Looks like a fun project.

When times were hard I used to re-seat chairs like this with new rush bottoms, just like this one had. I’m in UK, so I can’t reseat this one for you, but perhaps someone over there could do it? As you have made clear, that chair has a lot of life in it yet. Rex, your videos are admirable, particularly this furniture forensics series. I look forward to the next, and to your chair build.

Thanks Rex top work as always

Please make this a series😂❤

@RexKrueger

2 жыл бұрын

It is! This is the second one!

Extremely impressive video, excited for the project. Wife agrees.

Oh my god !! that looks nicer and more comfortable than my chair in my office. I'll definitely try to make one !

I really really enjoy this series, and I'm not the only one to! My girlfriend doesn't do any woodworking and isn't particularly interested in it, but she saw that video on my KZread feed and started watching it! We ended up watching it together and had a great time!

Love the beginning of this video… seriously.

I enjoy your sense of humor

a very awesome chair quite beautiful thanks for sharing your video

Very interesting. Thanks for the knowledge, Rex !!!!!!!!!!!!!!!

Rex that video was truly fascinating, thank you. Regards Jim UK.

Cool video, thanks for sharing.

Overwhelming knowledge, this series is awesome. This channel iss truly unique

Amazing! The simple genious of Our Forfathers. Thank you for helping us see the hidden mechanics that must have been passed down through the generations of family craftsman. I hope these simple craftsman somehow knew how special they were or how people would one day marvel at the knowlege and skill they possesed in their daily labors. Just knowing which way wood shrinks in a round peg boggles my mind.

Fantastic walk through the craftsmanship of this chair. You should check out the videos of Alec Steele making a similar chair with his father. the east coast seems to have a number of variations on the same system of chair construction. Really interesting.

Fantastic video. Thanks

Thanks Rex

Rex that was a great lesson in history of Chair making.

This is pretty awesome.

Nice find Rex! 🤘🏼 🪵💫 time…. Thanks for sharing.

Wow, that video was a real education for me. I never imagined so much knowledge could be contained in the construction of a chair.

@Giganfan2k1

2 жыл бұрын

From a chair in a ditch. When is was new it was made to be cheap, and somewhat rushed. See the cracks a shem or two. The crafts person knew exactly what they were doing. There is a venerated artist. I think it was Rembrandt. The reason his works were so collectable was he is very prolific. He sold his sketches fairly cheap compared to what they are valued now. They appreciated in value because a lot of people could buy in and the mastery of his craft was apparent. It is amazing what we value in our society, and what we don't.

What a great video. Thanks.

I clicked like directly at the opening sequence, even sharper wit than usual!

I look forward to it

I once had the chance to help tear down a 150 year old post and beam barn.. all the joints were mortise and tennoned and thru-pegged. They were STUNNINGINLY tight. At first thought we could punch the pegs out so we could maybe reassemble potions of it. ...That idea ended when after 2 hours of hammering on a peg with a brass drift pin and it hardly moved at all. Some of the guys were ready to throw the idea that we'd never get it apart and were willing to just start cutting things apart. I suggested we use an auger and bore the peg out with a slightly oversized bit.. we'd have to replace the pin, but that is a lot easier and less work than reworking major timbers... Even after boring the pins out completely, the timbers STILL didn't want to come apart easily, requiring a lot of levering and even a porta-power spreader to get to finally come apart. But we were able to deconstruct the bldg and it now stands in a new location, though with new pegs my friends grandfather later told us, the pegs like that were routinely cut from green wood (often hickory or ash) cut oversized and hard driven into place and cut flush. done that way, they kind of "bond" to the other wood in a way that it's nearly impossible to get them out. it must be bored out, the way we'd done