I swear to God, I watched 2 different KZread videos and they were over complicating the hell out of it, to the point I didn't feel safe starting my first weld after I watched them. It was then I knew I had to find one of those old US training films for welding. Lo and behold, the great PeriscopeFilm saved the day. Now I feel safe! :)

Hands down, a no bullshit approach to teaching a subject that is so easy to complicate and overwhelm a new student welder. I am now going to use these in my SMAW classes. I'm going to build a partner written test for the end of each one of these videos. That way I can see who's actually paying attention. Awesome.

These old tutorial videos are amazing. Im not an english spoken guy but the english spoken at that time is so nice, not even close to the english heard today.

@100texan2

4 жыл бұрын

Because back then the teachers were teaching school, the three R’s not indoctrination of politics and political correctness.

I'm in welding school and this video has a lot of little details I hadn't noticed when practicing that the instructor didn't insist much on. It's been very useful, thank you.

@mattfogarty8144

4 жыл бұрын

I'm in the same boat

Im surprised the quality of those arc shots are really easy to see compared to some videos on youtube today lol

Wow This is the movie we watched in metal trades class in 1977-79. I chose my direction and never looked back. It was dated then but the information is timeless. “Joe Magees afraidy cat afraid to strike an arc!”

It speaks for itself the quality of the welder and machine when they didn't have technology like we have today on their side. A lot of men today cannot run passes that look this good.

I'm a welder. I like this video alot. It's easy to follow. It explains things in plain English I really like fabrication of Metals. It's a good science a really good trade.

@murkypuddle33

Ай бұрын

hey man if I buy those welding goggles like he has on in the film, is it 100% neccesary that I buy the full face mask. Because I see the face mask is also tinted so it's like...why the hell is he wearing 2 tinted PPEs?

Im a metal fabricator and welder in the trade. Great video, explains every step in SMAW/CC methods. :)

I am pleased you uploaded this, and Part 2. Yes I am 😀 Still very useful and clearly presented information. Just what I need to motivate me to try again at arc-welding. Thank You.

I love this video, but the guy welding looks like he’s made a few “rib cages into coffee tables”.

Simple and very detailed footage 😀

Great teaching video.

Wow this is soooo cool

they haven't made them like this in decades.

Well, the rods are the same, and I actually have some of those electrode holders pictured at the beginning! I mean they're new, seventy years later... but we'll never see power supplies like that again. Too bad! I guess one of those big Airco things would cost a few thousand dollars now? No electronics! I once remarked that a big power supply didn't even have a light to show that it was on, and a guy said "It doesn't NEED a light, you'll know it's on because it makes a noise!" My favorite are the old GE ones that look like a big drum, with a crank on the top, like a giant coffee-grinder. I just saw an electronic stick welding supply that had nothing sticking out of the box. The box was flat, like a big book. No handle or knob sticking out, just "up" and "down" buttons to adjust current, a few led trouble lights, and a strap to carry or wear it with. I think it weighed something like six pounds!

@murkypuddle33

Ай бұрын

Leonard, I know it's a long shot here, but I'm about to start my first ever weld, I'm 32 and I would be so honored to use one of your tools, sir! I wish someone would pass on their "torch" to me, not literally.

Thank you very informative

this is golden!

@amasawillis3592

6 жыл бұрын

Do you have a up to date video?

@spenserpayne4746

5 жыл бұрын

Amasa Willis 1942

HAVE ! To ! Like These 1940s ; Victory ! Music !! Themes !! And ! Elmer ! Alfraidy ! Fudd !! Cartoon ! Shots !! / That Cat ! Instructor ! Looking ! At Alfraidy Bare ! Eyed !!?? That said ! lve always ! Wanted to ask every Proffessonal Welder ! How there EYES !! ARE !!?? AND those ! Old ! ORIGINAL !! WELDERS !! YOU !! KNEW !! WHEN THEY !! WERE ON !! I MUST ! ADMIT ! THAT NOISE !! FRIGHTENED !! ME !! WHEN ! I WAS !! ONLY !! KNEE ! HIGH !! when that Noise ! Wasn't there !! I knew it was ! SAFE !! AGAIN !! Joining Metals! like that ! I always ! Thought it was like Joining CONCRETE !! TOGETHER !!! JUST ! AMAZING !! TECHNOLOGY !! FOR !! IT'S !! TIME !!! Thanks to Videos ! Like ! This !! Thanks !

where can i get the hand books ?

@usernamemykel

3 жыл бұрын

WHAT hand books? Left or right?

any body please help me the exact orientation of the electrode (@ what angle we hold the electrode) for all positions in groove and fillet welding ??

@Anchorarms69

3 жыл бұрын

Welding student here. It will change depending on the position, and unfortunately this is one of the things that you really can't explain to someone. You really have to get practice and figure it out for yourself because everyone welds a little different. Typically you don't want to push the electrode, because you can trap slag. The general rule is to drag the rod by about 10-15 degrees. In general, however, the closer to vertical you hold the electrode, the flatter the bead will be, and the deeper the penetration. When you use a steeper angle, i.e. further from vertical, the weld tends to crown up and penetrate less. Look up Steve Bliele arc welding part 1 and 2, those videos explain what I'm talking about a little, so you can actually see it in practice. I can talk all day about theory, but the only thing that will really teach you is practice so experiment with different angles and see how your welds change. I wouldn't recommend changing technique in the middle of a weld, but do one weld one way, then another weld a different way, and compare them. See whats different and figure out what works best for you. Hope this helps.

❤❤❤❤❤❤❤

Oh go on and strike it, it won't hurt you! 3:43 the arc produces heat of about 6,000 degrees Celsius. What will hurt you man?

C. ossc

I like the animation bits.

You know this guy is a real welder cause he uses a T-300

India. Take note.