Will be building this in the next few says. This design is amazing

Very nice work! Been printing some caddies and trays to do two 3 disk arrays and now I'm going to shift my deltas over to print this case. Subbed.

@replicrafts

2 күн бұрын

awesome! would love to see your end result or if you have any questions, shoot me a message on discord "andrewe1". Cheers!

If hadn't already built an NAS, it would be tempting.

Please make more things! I just love the industrial design of this

@replicrafts

2 ай бұрын

Thank you so much for your comment

This is AMAZING! Kudos for the design.

This is one of the coolest 3D prints I’ve seen. Great design!

*subscribed* this is an amazing design in terms of utility, ease of use and toughness. I am hoping you'll make more videos about future projects.

This is a very good and well thought out design. Very clever. Great job! I really need to get a 3D printer lol

This case is awesome! Wow! Very inspired now to make the 6 or 8 bay version of my own case now. It currently is a full ATX 16-bay case with toolless drive caddies and removable fan wall modules, but id like to eliminate the need for superglue altogether. I have designed locking pins that handle this for the chassis, but the drive bays at the front still need glue. After seeing what youve done here, im excited to see what i can come up with when i do a compact design from scratch, where i can better integrate slots for my snap-latch caddies 🙂

Looks awesome. I hope you can design an MATX NAS case next.

Love it, well done.

Great project!

That's sweet

Awesome video!!! And what a way to start your yt channel! I'd love to see you run some tests (temps, acoustics etc). You should call it "the vault"😁.

@replicrafts

3 ай бұрын

Ha...thank you... and damn, that's a pretty good name!

Talk about a great first video. Bravo.

@replicrafts

3 ай бұрын

Thank you! Means a lot.

Very nice job, liked commented, shared and subscribed

@replicrafts

3 ай бұрын

Thank you!

If only I had a 3D printer....

@playeronthebeat

3 ай бұрын

Bought mine last year. One of the best and coolest purchases I made the entire last year!

feel like this could take some cues from the silverstone ds380 which packs in 8 drives in a smaller space

@replicrafts

3 ай бұрын

More drives meant sacrificing full-atx psu like the ds380 does, which is something I didnt want to do. This was never meant to compete with a commercial product though, I wanted a toolless nas case that would make swapping components as easy as possible and there werent any solutions for my particular needs, and decided to share the design for anybody that wanted to try something different…

what a lovely design, could it be done in aluminium and what about standard ATX, E-ATX and Server Sized Motherboard versions?

@replicrafts

2 ай бұрын

Thanks for your comment… Aluminum with that level of complexity is not something an individual can do so at that point a commercial solution is a better option.

For something like this I would highly suggest the use of ASA for the better heat resistance, epically if you put in a higher end GPU that is going to get hot. PLA's glass transition point is only about 70c before it starts to get soft, so I would not suggest using PLA for a computer case.

@replicrafts

2 ай бұрын

I agree PLA is not a good idea, that's why I recommended PETG which is what I've been using and is more than enough for this application.

@SirLANsalot

2 ай бұрын

@@replicrafts I generally just skip PETG and go to ASA, if its not going to work in PLA, I just go to ASA even if its slightly overkill. Its not like PETG isn't good, and a new one on the market called PCTG is almost the best of everything. Almost a perfect filament (check out Zack Freidmans videos about filament, his ranking one talks about PCTG).

@replicrafts

2 ай бұрын

@@SirLANsalot Thanks for the tip, PETG has been so easy to use for me that I've not looked into other filaments. Will look into ASA.

Amazing case. Is it possible to print multiples of the centre HDD piece so you can have two or more rows of HDD for larger capacity NAS cases?

@replicrafts

25 күн бұрын

an extended caddie was planned for 2 extra hdd’s, however time constraints have not allowed me to design it. The files include the fusion 360 files though so anyone can try and add stuff to fit their needs. Thx for the comment!

The design is quite clever, but I wish I could add a backplane to the hard drive to filter out the ripples of the PSU.

@replicrafts

2 ай бұрын

The fusion360 files are now included with the download… you can modify it as you see fit!

This is awesome! Wish I had a 3D printer. Do you think any parts might sag from any heat sources? 🤔

@replicrafts

2 ай бұрын

Warping/sagging is not an issue if you use petg!

@CampRusso

2 ай бұрын

@@replicrafts Ah, did not know that. #3dprintnoob 😁👍

Отличный получился корпус. Сколько времени прошло с момента как ты продумывал это в голове до реализации?

@replicrafts

2 ай бұрын

Thanks, around 6 months from idea to final implementation I would think. Having a single 3d printer didn’t help with the times though.

Cool design .. do the HDDs get enough air flow? .. what is the max temp?

@replicrafts

2 күн бұрын

Yeah, there are 2 fans dedicated to blowing air through them. Average temps are 35-40 C... In the hottest days of summer, a stubborn 8 year old WD RED 8TB reached 45C... that drive likes to run hotter than my newer RED 16TB's. Thx for your comment!

This is super dope!

Which motherboard would you recommend using?

Are there any plans for a 4 bay one? It costs me 280$ to only order the parts that dont fit on my own printer :(, I don't know anything about splitting the parts..

@replicrafts

3 ай бұрын

Sorry but no plans of a smaller yet… I’m soon releasing the cad files so people mod as they please tho.

Amazing. Do you plan to build something similar for mATX motherboard? To be able to accomodate GPU, HBA and network card? Thank you.

@replicrafts

2 ай бұрын

So I've gotten this question quite a few times... To be honest, it would be too resource intensive to make a 3d printed case that fits mATX when the common print area is just around 250x250 mm. So current 3d printing limitations would make something niche even more niche and it's hard to dedicate time to that...but never say never. This case already has support for a dual-slot PCIe expansion card btw. Won't fit a full-size video card but there are many smaller solutions that will. Thx for your comment

Good design, hdds separate from the board and well cooled. Still, limited to mitx... Unless you're space constrained, see no real need to do that. Much more hassle to build and cable manage, much less capable boards, few bays.

@replicrafts

2 ай бұрын

I wanted something compact that wasn't a pain to disassemble (had a fractal 304), and that was completely toolless to make component swap as fast as possible as uptime was the priority... I couldn't find any commercial options that fit my needs so I tried to make it myself. So far it has met all my expectations and of some people close to me, hope it does the same for anybody else that thinks it could be useful to them. In the end, it's just another option for anybody that is interested in a home server/NAS. thx for the comment

@BoraHorzaGobuchul

2 ай бұрын

@@replicrafts I have had a node 304 and I feel you :) For me, anything smaller than an eatx tower is too small to bother building in. Don't appreciate working in tight spaces.

*cries in ender 3 v3 ke* it is 240mm vertical though. maybe it could work. think ill give it a try or maybe you could make a ender 3 friendly version

@replicrafts

3 ай бұрын

parts are designed to be printed in a specific orientation, you would be better off splicing the parts but like I said, its untested and not recommended. Making it fit the ender 3 would mean sacrificing two drives, which was not the design goal.

Have you considered the following variation on your design? Instead of individual 3.5" drive bays, each holding a drive in a caddy, provide space to slide in one of the existing commercial 4 or 5 drive bay enclosures that has a SATA/SAS hotswap backplane - these usually are designed for adjacent 3x 5.25" optical bays in conventional older PC tower cases (like Antec). This removes the mess of SATA power and data cables running to the individual drives. Instead the power and data are routed to the backplane from the rear of the enclosure, which typically has its own cooling fan. The main downside is that you lose 1 or 2 drives over your existing design. I purchased a 4 bay Athena Power enclosure (on sale from newegg) that has toolless drive bays, 2 SATA power connectors and a MiniSAS SFF-8643 data connector on the back side. Very cool, and the MiniSAS connector supports 12Gbps SAS 3 if I use an HBA that supports it. I envision one of these sliding "toaster style" into a modified version of your case. What do you think?

@replicrafts

3 ай бұрын

Thanks so much for your comment. So one of the challenges I wanted to do was to have something that worked and was fully 3d printed. The minute you start adding off-the-shelf parts then the design becomes a little more complicated since those parts might be hard to get, discontinued, or have variations. Don’t get me wrong though… suggestions like yours would certainly make the design better in some ways as 3d printing quality is just not able to compete with mass-produced products. I certainly would like to have variations to the case with suggestions like yours but at the moment I cannot afford to invest more time in something that is very niche. I want to get some other ideas out before going back to this case… I am working on releasing the CAD files though, that way people can take the design and make it theirs or adjust it to their needs. There are many ways to improve the design, I just wanted to set the baseline for something that was completely different to other 3d printed offerings, as I have never seen another 3d printed case that’s held together by 3d printed parts. Cheers!

@dktol56

3 ай бұрын

@@replicrafts Thanks for the quick reply! I appreciate your goal in this NAS case, and the results are excellent. You clearly spent a LOT of time refining the design and it shows. Definitely worth the $10 for the print files. I especially appreciate your detailed documentation. I've seen some other cool printed NAS cases on youtube and printables, but the instructions and pictures are somewhat lacking. Maybe not a problem for those experienced in 3D printing, but I have 0 experience and no printer - the learning curve looks steep, and I have some other priorities at this time. Maybe later. As far as these 4 or 5 drive bay enclosures with hotswap backplanes, they are quite common (on Amazon and Newegg) and have standard dimensions defined by 3 x 5.25" (legacy) optical drive bays. Strictly speaking, two of the dimensions are restrained by the PC case standards, but the depth can vary somewhat depending on the size of the cooling fan in the back. For many people building their own NAS, a hotswap backplane with easy drive access has become a common requirement, so this seemed like a straightforward way to incorporate this feature into your design. I look forward to your future case modifications. You might check out the NASCompares youtube channel for some ideas. Cheers!

@replicrafts

3 ай бұрын

@@dktol56 Appreciate the compliments on the manual, believe it or not the model was ready since summer of last year, I had just put off the release because I wanted to do a proper manual and since it's not exactly a fun task, I kept putting it off lol. Thanks for your comment and hopefully the design will be of use to you in the future.

Pretty cool.

Nice! But why are we 3d printing to slap HDDs into? SSDs or bust. Shave weight, heat, etc

Impressive

Very nice! If I hadn't already built my NAS in an 8 bay case, I'd be downloading this as I type this. Regardless, that's a very well thought out case.

Having trouble finding mini itx supporting 6 SATA most under $100 are 2 ,or 4 but at SATA 2 speeds.If I spend $200+ for mobo i might as well build full size PC fro ML/AI.

@johngelnaw1243

3 ай бұрын

Or you could buy an HBA card. I'm running an LSI 9300-8i in my NAS ($80).

@maTTkogusgus

2 ай бұрын

If you will do not use m.2 slot for nvme search google for asmedia asm1166 m.2

@HksF16

Ай бұрын

@@johngelnaw1243 who is ripping you off? i found it for $38 including sas cables