Witness the ESAB ROGUE 200i PRO unleash its power as we put it through a robust test using 20 welding electrodes. Brace yourself for a demonstration of unmatched performance and reliability, showcasing its ability to conquer tasks without a hint of breaking down.

@jblaplano7982

6 ай бұрын

Bat po nagbabago amps habang nagwelding. Tanong lang po😊

@FabandWeld

6 ай бұрын

Common po sa mga ganitong machine yung ganyan nag pa fluctuate ang amperahe dahil po yan sa arc manipulation sa dulo ng electrode. Ang amperahe po kasi tumataas at bumababa... Example: kapag nag start ka ng 100A ang proper distance dapat ng dulo ng electrode mo sa metal ay 2 or 3mm lamang ngayon kapag tumaas yang ng 4-5mm tataas din po ang amperahe kapag naman halos didikit kana bumababa naman ang amperahe. kaya minsan kapag nasobrahan ng babasa metal napuputol ang current kaya dumidikit ang electrode. With this machine it will shows that it has a proper internal components na sumasabay kung ano ang nangyayari sa current flow. May ibang machine kasi na Stable ang Reading ng LCD meaning walang response ang internal components kung ano nangyayari sa dulo ng electrode, and that is very concerning which may lead to burning your PCB parts such as IGBT or MOSFET.

@lovelessv2

6 ай бұрын

sir pa test din po ng TIG🥰

@FabandWeld

6 ай бұрын

@@lovelessv2 Sure Po next Sunday will post the video here... Cheers!

@edwardpaduga2876

5 ай бұрын

Locally available na sya And Hm?

good day Sir, ask ko lang po ano po best na electrode pra sa maninipis na tubular. Thanks in advance po!

@FabandWeld

Ай бұрын

kung mga tubular na manipis or plain sheet at hindi kapa sanay mag welding, mas mainam gamit ka ng maliit na electrode like 6013 1.6mm or 2.0mm mas maliit mas mababa ang AMPERAHE na kailangan mo so mas less chance na mabutas ang metal na i we-welding mo. REMEMBER THIS. Bawat electrode may kanya kanyang settings ng amperahe and the best RULE OF THUMB to start is calculate your amperage base sa laki ng electrode mo... 1.0mm = 40-45 Amps I multiply mo yung 40 or 45 Amps sa size ng electrode. 1.6mm X 40 Amps = 64 Amps 2.0mm X 40 Amps = 80 Amps Good LUCK!

Will it run 6010 rods?

@FabandWeld

4 күн бұрын

Any rods buddy! its ESAB not just some local or chinese brand welder.

@DazFab_Metalworks

3 күн бұрын

@@FabandWeld ok thanks pal its just some 200i pros have a cellulose indicator or light on the main panel that you have to select and this just has two for stick/tig instead of 3.. i cant find any info on rods only rod size

@FabandWeld

3 күн бұрын

​@@DazFab_Metalworks Nothing on that with this machine, buddy. The parameter settings of this machine are only for Stick/TIG. Plus, the hidden setting on your left button, when you press it for a few seconds, will give you the ARC FORCE (AF) and HOT START (HS). For cellulose electrodes such as 6010, that is a straightforward setting using just DCEP polarity, unlike 6011, which can use both DCEP and DCEN depending on the welding output you want.

@DazFab_Metalworks

3 күн бұрын

@@FabandWeld Great reply thanks pal