thank you!! i always have problems turning images into beads, this helped so much :)

@kinitstuff

3 жыл бұрын

No problem I'm so glad it helped!! Now you'll be an unstoppable bead wizard too! >:D

Yay. Thanks.

14:27 AHAHSKAJSK IM SO HAPPY I SEE DANGANRONPA PERLERS EVEN NAGITOOOO

@kinitstuff

2 жыл бұрын

I have a huge and growing Danganronpa collection! I'll be posting my timelapses from building them!

this is so cool!

@kinitstuff

5 ай бұрын

Thank you!

I've seen bead art online a lot, and found it very interesting but never thought of trying it. Besides, I don't really have any experience drawing or anything like that. However, I just randomly saw a VERY starter kit in a shop and just bought it, came home and started watching videos about it. I haven't even tried making anything yet and I'm getting more and more excited! Thanks for the video :)

@kinitstuff

Жыл бұрын

Omg I hope you've started by now!! Let me know if you have questions!!

You can turn on the grid in ms paint by going to view and ticking the box that says gridlines. I personally have an older version of ms paint on my computer so I can count the needed spaces a lot easier because the zoom tool is messed up in newer versions of paint

@kinitstuff

2 жыл бұрын

I love old Ms paint so much. I never liked the grid lines though? I have no idea why they bug me when they're literally perfect for pixel art 🤣

could u do a video where u reproduce the reasons why u don't use the Tape method please?, as far as i know from both watching others videos and from experience using it myself the Tape method is by far better than the method u use, then again i haven't tested Wax paper yet as i didn't even know it was possible to use it until just recently when i found your videos looking for the best way to iron the beads.

So cool! I'd love to hear about how you do pricing in a separate video.

@kinitstuff

2 жыл бұрын

I would too lol I'm still figuring it out since I don't have a store or any seller's shipping deals yet but I can at least say I calculate it as Cost of Materials + Cost of Shipping/fees (selling through PayPal) + Hourly Rate! Cost of shipping is usually an estimate using things like the USPS website to figure out what I should expect for the size of the piece. I bundle all that into the price of the item so I can make it an even $ amount and so that the buyer knows the full amount they'd be expected to pay right away!

Thank you so much! I was preparing a gift for my girlfriend but my board was too small i was panicking so hard until i found your tutorial. Yo just earned a subscriber!!!

@kinitstuff

2 жыл бұрын

I'm glad you found me!! Now I have to make the sub worth it oh gosh 🤣

Nice job!

@kinitstuff

2 жыл бұрын

thank you!!

istg you're so underrated

@kinitstuff

2 жыл бұрын

That's okay I wouldn't know what to do with notoriety 😂

You are too pro I can’t reach this level I need the picture beside the board for me to follow

@kinitstuff

8 ай бұрын

You know what's weird is I've tried printed patterns directly under the clear boards, and I can't do them that way! I always mess it up, I have no idea how

THank you so much ! This'll make me able to start the project I've had in mind for at least 6months ! If I film and upload it I'll be sure to give you some credit ;)

@kinitstuff

2 жыл бұрын

I'm excited for you!! Good luck!!

perfect you helped me a lot

@kinitstuff

2 жыл бұрын

I'm glad!!

@adrenn

2 жыл бұрын

@@kinitstuff i have a question, which iron you using?

@kinitstuff

2 жыл бұрын

@@adrenn it says "UTOPIA" on the side, I think it was like the cheapest one I could buy when I got it!

@adrenn

2 жыл бұрын

@@kinitstuff thanks!

Love this!!! Can you attach the template to your description?!

@kinitstuff

2 жыл бұрын

I actually don't give access to my templates for free! I plan to create listings for them in an Etsy shop in the future, but for now they're unavailable. (I always tell people I won't be mad if they screenshot them; I know that might be tough on this video though!) BUT I can at least tell you about the great free template builder I found online that lets you upload any image and tune it to your needs, Pixel-beads.net! I use it all the time now to help with bigger projects and it is honestly an amazing resource for custom work!

Wooow

Could you re-upload this tutorial with a better resolution 🙏

@kinitstuff

2 жыл бұрын

I'm planning to try but I'm worried the program I recorded with was the problem and I don't have that template anymore 😫 I might redo this tutorial for a small project with a new program and clearer res!

I had to click and like just because the title said "Fuse"...

@kinitstuff

2 жыл бұрын

I'll take it?

@primemech47

2 жыл бұрын

@@kinitstuff LOL. Fuse is an anime writer. I jumped the gun before realizing what it was

What kind of pegboards do you use?

@kinitstuff

3 жыл бұрын

I use Perler brand Superpegboards!

this vid is my intro to your channel and i have one thing to say: somebodys a bakugo fan-

@kinitstuff

2 жыл бұрын

I'm more of a Deku fan tbh, I don't remember if he's in this video because I'd taken him down to put that commission up 🤣 eventually I'll make todoroki to complete the trio

@wolfieisacat13

2 жыл бұрын

@@kinitstuff nice

That’s impressive

@kinitstuff

2 жыл бұрын

Thank you!

I love your work! Question, could you use a Cricut press iron on a lower setting?

@kinitstuff

2 жыл бұрын

I have no idea; only one way to find out!! I'd say just give it a test run, but be sure to use parchment paper in between your press and the project to protect the press; also be aware that if you iron the beads with them still on the board, the board could end up getting warped and melted (it can with regular irons too of course, I just don't know how powerful the cricut press is in comparison!)

Are you able to reuse the boards after they warp? My boards tend to warp out of shape and become unusable.

@kinitstuff

2 жыл бұрын

YES but the thing is I think it's very hit or miss and depends on the temp you use and the amount of pressure you put on it, I've immediately warped a board before but I've also had boards I've been able to reuse over and over without them actually bending up on me. I think I've been lucky and have started trying the tape method for big stuff since you really need to make sure everything's melting fully on those

Where can I find the large size board used in the video?

@ohcrapimagrownupnow

3 жыл бұрын

Perler.com or Amazon! It's called a superpegboard! The kid's sections in craft stores also sometimes have it

What numbers did you put for the horizontal and vertical

@arandomtree5257

3 жыл бұрын

thats what i wanna know too

@kinitstuff

3 жыл бұрын

This is how I found out how bad the resolution is on the screen share part of my video 😱 the dimensions were 150x120 pixels!

@Kunoichi1116

3 жыл бұрын

@@kinitstuff I was just about to comment about that to! lol Im trying to see that to...maybe you can do another video about pegboards and sizing? btw love your stuff...seen you on tiktok long time ago cuz of that giant perler on your wall...did you do twitch for a time? felt like I found you on there once (maybe bad memory)

@kinitstuff

3 жыл бұрын

@@Kunoichi1116 I'm thinking like a general supply video would be helpful so people know where to get boards, what kind are useful, what tools are useful etc. Also yes!! I sometimes stream my beading live on Twitch but I haven't tried to be consistent there yet. I'm glad you like my work!

Great tutorial. I was wondering if there's a tool that makes your life easier to create pixel arts instead of doing with your own hands. I find it a bit hard and tidious if you plan to do it all the designs by yourself. Thanks in advance.

@kinitstuff

Жыл бұрын

No problem! There's a website that does a pretty good job of converting images to pixel art called pixel-beads.net you should try, it's great for bead templates specifically!

@thegreedy211

Жыл бұрын

@@kinitstuff Oh yeeah thank you. My question is: is there any equipment/machine/tool that you can use to create your pixel arts besides doing it with your own hands?

@kinitstuff

Жыл бұрын

@@thegreedy211 nope! Not that I know of

@thegreedy211

Жыл бұрын

@@kinitstuff ooh well, thank yooou 🥰

how much time did you spend to do this?

@kinitstuff

3 жыл бұрын

I think it was about 12 hours from start to finish (including making the template)

What board do you use in your video

@kinitstuff

2 жыл бұрын

Perler brand Superpegboards!

Have you tried to use a blow dryer to heat the wax paper a bit?

@kinitstuff

2 жыл бұрын

I haven't! Would you do this before ironing to make it start to flatten and stick sooner?

@barberbarbie2467

2 жыл бұрын

@@kinitstuff you absolutely could! I normally use it to lift the wax paper at the end. Makes it a little easier when it heats up.

@kinitstuff

2 жыл бұрын

@@barberbarbie2467 I will definitely be trying this idea!!

Is there a way to do this on procreate 😅

@kinitstuff

Жыл бұрын

I've never used procreate BUT I found this amazing in-depth tutorial on how to make a brush that will draw in single pixels like the pencil function on MSPaint! That will give you the chance to draw pixel art from scratch OR to use my method (assuming procreate lets you insert images onto your canvas) of recoloring individual pixels kzread.info/dash/bejne/g6Otu6dpgLaWmrw.html You can save some energy by using pixel-beads.net to give you a pixelated starter image in the size you want with the bead brand you're using! I use them sometimes now to save time even though I still go in and adjust several parts afterward. Hope this helps!!

@kyerose1725

Жыл бұрын

@@kinitstuff Thankyou soo much :,)

Can u make tutorial from beginning

@kinitstuff

Жыл бұрын

That's what this video is, it's a tutorial of my entire process from beginning to end 😂 But actually if you want an even easier way to make a template, to try pixel-beads.net ! It lets you upload any photo and make multiple templates for a variety of bead types, I'll definitely do a tutorial vid on that one some day but it's really easy to use on your own!

@gop9793

Жыл бұрын

@@kinitstuff ohh I’m so so glad ,thx

@kinitstuff

Жыл бұрын

@@gop9793 no problem!!

You can use wax paper ??? How ??

@kinitstuff

3 жыл бұрын

Place the paper wax side down on the beads (the side that feels smooth) and iron with light pressure! It will stick to the beads and can pull them off the pegs if you're not careful but it's much easier to see through so you know if the beads fall over plus it helps hold everything in place much more than parchment paper which doesn't typically stick very firmly! It does leave a slight residue and can sometimes be hard to peel off though!

@XxglowslyxX

3 жыл бұрын

@@kinitstuff to be honest I always thought it would melt on the iron! Thanks for the tips :)

@kinitstuff

3 жыл бұрын

@@XxglowslyxX I would have thought so too!

Hi! I found u on tiktok lol

@kinitstuff

3 жыл бұрын

Hurrah!! I gotta really get more vids up on here, people are starting to come over now 😳

@autisticlettuce

3 жыл бұрын

@@kinitstuff

wait.. what if.. WHAT IF I MADE A HUGE FNAF PERLER???

@kinitstuff

2 жыл бұрын

Do it

@boyboss_milo2448

2 жыл бұрын

@@kinitstuff Okay :) Ty for the inspo!

@kinitstuff

2 жыл бұрын

@@boyboss_milo2448 try to get glow/neon beads for it for extra creepiness!!

@boyboss_milo2448

2 жыл бұрын

@@kinitstuff ooo! yes :D also, what is the website called where you can turn images into pixels?

@kinitstuff

2 жыл бұрын

@@boyboss_milo2448 I believe it's called pixel-beads.net!

Whenever I iron-on to the board it ends up warping

@kinitstuff

2 жыл бұрын

Have you tried adjusting the iron to a lower temperature (if it has the option)? I've also noticed it warps if I'm pressing down a lot (usually for the larger projects where some of the center parts aren't melting as fast as the edges); if you want to avoid ironing on the board, I did just try out the tape method for the first time on a large project and it was tedious but went pretty well otherwise!