this is a perfect example of "I bought the whole tool I'm going to use the whole tool"

@DJCloudy_

2 жыл бұрын

"I paid for the whole speedometer I'll use the whole speedometer"

Bloody hell!! That drill was mighty impressive!! So was the end mill, but that drill!! Wow

My goodness you are absolutely amazing i swear if im having a bad day i.just watch your videos and iy helps me smile and just makes it all seem ok. This video here was so awesome. You are truly an inspiration to this world and i would pay money to come here you speak. So thank you and your family and crew for all you are doing. I mean this from my heart you guys are a true asset to this world. Ty

everybody: yeah, stainless steel is solid 2020 CNC MACHINE : haha metal chips go brrrrrrr 8:00

@zhuangzhenggarygao4662

3 жыл бұрын

Stainless ?

Haas mills everywhere are shaking in fear

@icy_demons_

3 жыл бұрын

Hahahhahaa haas is great and all but not the strongest and fastest. We have one at work and it just doesnt do the things we want it to do, like big cuts

@clemensexenberger2455

3 жыл бұрын

Hermle is the best

@dominic6634

3 жыл бұрын

I don't know about that. Our Haas handled a 5000lb piece of 304 Just fine.

Pretty sure my home tormach couldn't slot like that in pink rigid foam let alone steel!

@b2dmastersniper

3 жыл бұрын

Haha

@Marshall1174

3 жыл бұрын

The joke wasn't even needed, you had me laughing by the time I finished reading the word "Tormach". 😉

@MotoBuilds

3 жыл бұрын

@@Marshall1174 What Machine do you personally own?

@nickmann5822

2 жыл бұрын

Tormach wont slot steel this way but it will delrin and aluminum.

This sure looks impressive! Too bad the promo's aren't available in Europe, would definitely try those out

That was absolute fun, that is pushing the limits the right way.

Now that’s impressive!! That was very cool to watch!!

Titan!!! I watched this while waiting for breakfast early this morning. I am watching it again at 11:45am. I just want to get psyched up again. I don't care about the tool or the cut, I just feed off the hype. Thank you!!!

I have no idea what’s going on but I love the enthusiasm and the goals that you set out

Johnny Knoxville would love seeing this CNC jackass Event, i held my breath watching your video, you have to be a TITAN to try this !!

Damn!!! I love the energy! I was sure the end mill was gonna go on the last one when it was screeching. Awesome!!

It's said that, if you speak "depth of cut" 3 times in front of a mirror, at exact 00 a.m. , Titan apears behind you with a loud "BOOOM"

Good to see the spindle and tool holder stay strait and not flex in a wired direction 😂

@jeanyonsei2318

3 жыл бұрын

That's something I've never seen before like in 7 years of machining.

@bluustreak6578

3 жыл бұрын

Like last time, yeah :P

@MF175mp

3 жыл бұрын

@@frp1276 that's a tiny problem if the machine would otherwise be capable and rigid enough

@MF175mp

3 жыл бұрын

@@frp1276 sure not. The possible extra rigidity is there mainly for precision and stability, not for being able to use more chooch than the spindle can deliver

damn Titan cutting steel same speed as i do plywood :D

I wish I could see it without coolant :) Kennametal, please, make those deals available for Europe!

That was AMAZING!!!

That’s nuts absolutely crazy !!! Awesome Boom!

Great video, you guys contune to big things and the community loves it. Could we get a shot of the controller with the spindle load when doing the cuts next time. It would be good to see the load at the start, middle, and end of the cut.

@marka2555

3 жыл бұрын

14:26 ???

Have too admit I live in the UK but man I love this guy, what a legend I bet he's an absolute blast too work for 👍👍

I got goosebumps *_* amazing machining 💪💪

What an amazing video!!! We need to start making parts here in the USA!!

Thank you very much for this demonstration!👍👍👍🇩🇪

Placed an order for some Harvi 1's to test out on an upcoming job.

@yuvarajhktoolanddies8928

3 жыл бұрын

Harvi 1 s is cutter

I love u Sir!! Make it documentation for tools and make it for all standardization. Love it so much !

Watching this after running a 20 year old campat/leadwell 1250 and v40 at work that has never seen a feed over 40 is just wild

Looks great, What speeds and feeds where you using and what grade of steel was it?

Holy cow. That's impressive.

Ive had a few Doosan, when they were branded Daewoo machines, rock solid and thats what you want for tool life.

Awesome cuts

Crazy! 3/4" drill at 1,790 RPM, 81.28 feed. That is 351.5 SFM at 0.0454" per rev. Full slot at 2×D, crazy!

@petrbruky3424

3 жыл бұрын

kzread.info/dash/bejne/g4WsxZiSptLbocY.html

This is awesome

When the orders go out for parts needed to build the autonomous drones that will construct the first commercial spaceport I want Titan to make the first cut.

holy shit those are some impressive cuts in steel!

I'm not sure what I am more impressed by the HARVI TE or Titans apple watch strap : )

Hey Titan been a while since I saw you last, that chip is nuts but I must ask does your doosan mill have cat50 big plus tooling package, I have a SNK PC 60-55x profiler with the classic Cat 50 tooling but when I get my new universal machine I will probably be going with hsk tooling....must say that endmill is crazy, man they sure have come along way in 25 years!

Nice! those are some hot chips!!!

Di...Did i miss it? Where are the speeds an feeds for this demo? Thank you for the vid, awsome stuff!

@matthewrossilini5808

3 жыл бұрын

Yeah i really really wasn't too know the speeds feeds of that end mill. Looked to be around 30-40ipm.

@parkerwilson7860

3 жыл бұрын

He said 80ipm in the video

Nice job.

that is mind crazy and so cool

I can get a lot more excited when you are actually making a part.

@TITANSofCNC

3 жыл бұрын

Check out aerospaceacademy.com

WHAT MATERIAL WERE YOU USING?

Not really a related question for this video. But do you have / can you make a video about speeding up your workstyle or maybe give some tips ? I notice at my job that most of the time i take to long to setup my machine from te one product to another. Keep up the good work !

@austinwolfe7295

3 жыл бұрын

Look into "lean manufacturing"

@MichaelWhiskey2127

3 жыл бұрын

Schunk Viero S

Watched this live last week..... BOOM! Your faces before cutting were a picture, Stuart... 😬 Lars..... 😯 Titan..... 😁

I think my boss might be interested in this

Nothing like power, ridgity and sharpness. Did you all wear clean underpants for thsi demo.?

Titan excited? Nah not this big bloke. LOL. Man, I so love your passion for engineering. My engineering is at a minuscule scale compared to yours but I so love it too.

was this live?!

That’s more like it. No tiny radial cuts in aluminum. No weird ass machine flexing. Just the sound of a motor under load 😁👌

Titan I have been following you since you got titans of cnc started. I am so happy to see how far it has come, thank you.

How are you holding the tools?

That's insane how the endmill went full depth and plowed it like butter! We hold our breath when we cut at 1/8". This would have us running for the hills!

@BenAtTheTube

3 жыл бұрын

I had a quarter inch stub mill set up to make a key slot in a scrap piece at something like 16 ipm on the knee mill. I invited the supervisor to watch, and noticed he was standing on the far side of the aisle until I set up the plastic shield! It made the cut - way less than specified max with the Niagara Stabilizer 2.0. Until then our typical speed was only 1 or 2 ipm depending on which machinist with standard length HSS mills. 16 ipm is ridiculous when making a short slot to a stop length, but we ordered some carbide stub mills (not Niagara or Kennametal) from our regular supplier and now everyone is running twice as fast as we were before, with better control of the slot dimensions.

The shop in Cali still open or did you close it Titan? Just got to ask. You got a lot of Hass machine there.

Hey titans

I'm guessing it's not just the tool, but the rigidity and HP of the machine plays a role as well? I'm a newb

Oh my gosh....I thought that endmill will break...but that was cool...it just cut the steel like butter

Let's break this endmill 26 -> the tool still sharp 🤣

Show us some gauge pins after the cut!!

What material was it?

What type of steel...hard as m7 tool steel?

You sure are pushing the boundaries Titan Kennametal would have only allowed half that feed.From what I saw on your screen the RPM is 5000 so feed per rev is 0.016" that's insane.😮

Could you share parameters in stainless... Just broke 3 of those in 304...

What type of steel is it

BOOOM!

Beautiful 🤠🤠🤠🤠🤠🤠🤠

Woooo 140% servo load on that drill!

@poiuytrewq8ff

3 жыл бұрын

was hammering it, however it was intermittent with a duty cycle that would bring the overall average load under 100%

I love watching your videos but just one thing I noticed is that said that there was 35 holes but I can only see 28. As your mate said “I think your maths is wrong”. Anyway awesome machine and bits. Thanks

Any tips for OLD af mills getting some production speed? 😂

It's not just a "cool" cut but it is literally cool with the chips being straight up silver.

this is titans of cnc HHHHHHHHHHUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUHHHHUHHHHHHHHH ;D

Seeing metal chips everywhere in the CNC machine

A part of me needs there to be some kind of Guga and Titan collab

Love the channel, but you know as well as any of us....what kind of steel? Please specify.

Check out OSG ADO-TRS drills

Can I use this endmill on a small light duty benchtop mill?

@BenAtTheTube

3 жыл бұрын

Yes!! Just make small light duty cuts with it!

Machine-shop: You broke a tool, your fired Titans-shop: Let’s put promote it on KZread

You ARE actually taking a cut! MEAN cuts!

greetings from germany titan and the whole team :D funny thing: he said lets go lets do this - at that moment advertisment for datron HAHAHAHAHAHa for aluminium! THAT was like a joke ^^ but a thought how long can the endmill do this? did you cut with trochiodal milling?

You should try Full-drills with inserrts and spindle thorugh coolant,..... That is totally badass, trust me!!! Lika a Ø17,5mm in steel with at least 180 metre/minute

@doubledsledgy

3 жыл бұрын

Are you aware that he was drilling at S1800 u/min F2000 mm/min? No insert drill can do this much speed

@Sketch1994

2 жыл бұрын

@@doubledsledgy Exactly... Almost nothing takes a full cuy faster than a solid carbide twist drill....Except that funky HSS-Co staggered tooth slitting saw I ended up running at over 15m/min on a fixture of 24 aluminum extrusions (100mm diameter at 1270rpm with 32 teeth and 0.38mm/z) to cut an open slot on 6000 parts in under 3 shifts (plus another half for setup). I would be interested to see any 2.5mm solid endmill try to match that... lol

don't laugh but I got a Lagun FTV2s with MX2 prototrak.. I am learning what I can (started manual milling) and am I think enough into the learning curve to start running the CNC .. I have the pendant programing mostly figured out but I want to run stuff on a computer where I can work easier.. I have no idea what kind of software would be sufficient for my basic 2 axis work..

Did kennemetal literally name an endmill Harvi? I was thinking it was a Harvey tool but they dont go that big 🤔

@low-keygneiss63

2 жыл бұрын

I know, it would have been more appropriate if they named that cutting tool the C.H.A.D. #1.

what is that, 1018?

Hey men i like yours Chanel ..i like machins and i am work un a Biesse. I from Colombia and i like a shirt

Stuart is like "yeah... dude you're smarter than you sound" 2:20...

camera guys reflection in the window lol

whoooooooo~!

Love this guy 👍🏼👌🏼

imagine having to grind that slot

What happened to Dana. Does he not work for them anymore?

The previous DMG did not survive? 🤙🏼😅

That drill goes through steel faster than I can cut through butter from my fridge

cnc work

👍👍

I run two Mynxs everyday a 6500 and a 7500 doing tool and die work there BEASTS

@matthewcornelius5862

3 жыл бұрын

Nice, same here. Do you use the conversational programming on the control? Love it!

81" with a .750 how deep?

Nothing excites me more than hearing that sounds of chips hitting the guards, well almost, the wife excites frightens me a bit more

Stewart's never been on camera before lol

👍👍👍👍

Did you mention what kind of steel? It would be even more impressive if it were a tough steel.

@matthewrossilini5808

3 жыл бұрын

I'm guessing mild steel. If it was an alloy steel like 4340 i would be very very impressed. Even moreso if it had some heat treat on it. But i doubt it.