Full Restoration of Rusty Axe - It Will Chop!
Тәжірибелік нұсқаулар және стиль
Hello folks! Today I want to show you a new restoration of an old rusty axe! The axe is so old that the entire cutting edge was worn off. Well, it will be interesting for me to work with him! Let's start restoring this axe!
The first duty was to remove the old remainder of the axe handle and put the head of the axe in a rust remover. After cleaning, washing, drying, I removed the chamfer on both sides in place of the cutting edge. For the new cutting edge, I chose an old Soviet file. I removed the chamfer from the file and welded both parts together using electric welding.
Next, I went to the workshop to my friend. Here I carried out a complete heat treatment of the axe. I forged the seam and forged a new cutting edge. Then I carried out the normalization process three times. After that, I treated the surface of the axe and tempered it in heated oil.
Then, in my workshop, I released the steel and processed it into a clean one. I chose beech wood for the ax handle. As usual, I made a test, as well as a complex test for scrapping the seam. To make sure of the quality of the seam and the cutting edge. Enjoy this restoration video and please, share it.
Ingredients: veal, dry red wine, salt, red pepper, wine vinegar. Cut the veal, grease with salt and pepper. Add vinegar. Put it in the refrigerator for 4 hours. Then take it out, put it on a baking sheet and add the juice in what was marinated, cover with foil. Cook for 1.5 hours. In the middle of the process, remove the foil and let the meat feed. Enjoy your meal!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #axe #restoration
Пікірлер: 474
I knew that with everything you've learned over the years that you would eventually start forging as well. I think you did great. Especially for your first time. I hope that you will continue on that journey when you are able to. Also, let your friend know that us fans appreciate him allowing you to use his forge.
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you so much for your attention and interest. I will definitely tell him. I liked it too)
You are a Master at restoration.
@ScrewsAndTools
Жыл бұрын
Thank you!! ^_^ I'm trying to learn
@l.s.rivers1697
Жыл бұрын
@@ScrewsAndTools your doing a fantastic job 👏
@ScrewsAndTools
Жыл бұрын
^_^ glad to read
Делать и учиться, ошибаться и вновь делать, но уже на опыте. Респект и уважение. Смотрится на ура и одном дыхании. На неадекватов и хейтеров не обращайте внимания. Не ошибается лишь тот, кто ничего не делает. Лайк практически на каждом видео.
@ScrewsAndTools
Жыл бұрын
Большое спасибо за внимание и понимание ^_^ Продолжаю работать!!
Мастер не обижайтесь на неадекватов!!! Везде есть и плохие и хорошие!!! Смотрю с удовольствием , многое подчерпнул из видео спасибо , что делитесь опытом.🇷🇺🇷🇺🇷🇺
@ScrewsAndTools
Жыл бұрын
Приветствую! Большое спасибо! Вы понимаете в чем дело, я всего лишь учусь ибо тема интересует, но когда я подробно до мелочей описываю, что к примеру (предыдущее видео) это шашка, тут 60 см, отсутствует столько, сделано не в казачьих мастерских и т.д.. А потом пишут: "какая эта шашка это просто резак и т.д."... я же писал об этом. Объяснял... Видимо многие включают 10 сек в начале и 20 сек в конце. Все... Ну вы поняли о чем я.
@user-sy6lu5vl7s
Жыл бұрын
@@ScrewsAndTools Мастер эти индивидумы не понимают суть!!! Главное не смотреть ,а понимать !!! Понимать на сколько это сложно! Ведь не у всех руки из правильного места растут. А осуждать всегда легче, чем осознать всю картину воссоздания изделия и полёт мысли Мастера.
@ScrewsAndTools
Жыл бұрын
Эх еще бы это понимали бы многие. Спасибо вам!
@Andy-Anthony
Жыл бұрын
Йди нахуй зі своїм власівським ганчір*ям!!! Нацист!
@Twosist
Жыл бұрын
@@ScrewsAndTools я не понимаю и не стараюсь понимать, я так не смогу никогда, я просто получаю от вашей работы удовольствие. Спасибо Вам за это. И за то, что сделали ремонт в мастерской :) P.S. Вы очень хорошо говорите на русском языке, откуда Вы?
Алекс, у Вас один из самых душевных каналов , спасибо! И субтитры специально включаю, потому что у Вас - это как отдельный вид искусства 😊❤
@ScrewsAndTools
10 ай бұрын
Спасибо!)) Рад читать
I would love to see you work more in the forge and watch you learn as you go. You make great videos.
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you for your attention and feedback! I will try. The forge and workshop belong to a friend and there is always work going on. Sometimes it's inconvenient for me to bother him, but I'll come up with something interesting)
Great job on full restoration of rusty axe - it will chop ! Screws and tools 🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨🔨
@ScrewsAndTools
Жыл бұрын
Thank you!
great job...the additional steel to broaden the head was a good idea. And your friend has a great looking workshop....
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you very much. Yes, this is my first job. But my friend's workshop is wonderful, there are so many useful and interesting things there. I love being there)
Awesome using a file for the cutting edge. Got to love the flower gloves. Cheers
@ScrewsAndTools
Жыл бұрын
Hello Aaron! Thank you for feedback, yes I knew you'd like it))
Алекс, в этом ролике у тебя такие ГЛАМУРНЫЕ перчатки. Удачи и хорошего тебе дня!
@ScrewsAndTools
Жыл бұрын
О да, я знал, что зрителю они понравятся, спасибо за внимание и всех благ!
You did great. My suggestion would be to hang the piece if possible to normalize rather than lay on the ground. That way it cools evenly and the ground isn't cooling one side faster than the other. But overall it looked great!
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you so much for your advice and attention. That's a great idea. Next time I will definitely do so.
Подписался недавно, очень приятная качественная сьемка и не менее прекрасные работы, вы большой мастер! p.s спасибо за эмоциональные и живые субтитры на русском
@ScrewsAndTools
Жыл бұрын
Добрый вечер! Рад обратной связи! Стараюсь. Главное вот вы читаете их. Спасибо!
Какое милое начало, не расстраивайтесь из-за грубиянов Вы прекрасный мастер своего дела!
@ScrewsAndTools
Жыл бұрын
Благодарю за внимание!!
You are becoming a very good blade smith. Excellent job. Your recipes remind me of what my Jewish grandmother made. They were different from what my Irish grandmother fixed.
Siempre un gustazo verlo trabajar amigo...gracias por sus videos....👍👍un saludazo desde españa
Great forging work, my friend!
@ScrewsAndTools
Жыл бұрын
Thank you so much!
Alex right? I just want you to know you’ve inspired me! Seeing you bring all of these thought to be long dead ancient artifacts back to life is such an amazing process. I want to bring back historical pieces too, which is why I want to learn to restore these the way you do! It’s going to be a long and difficult road ahead, but as long as you keep going so will I! God bless you and never stop doing what you do! The world needs you to preserve it’s history! Georgia needs YOU! You’re a hero! I hope someone higher up will recognize your efforts one day and give you the medal you deserve.
@ScrewsAndTools
Жыл бұрын
Greetings! Thanks for attention. Yes, my name is Alex. I am very pleased and honored to read your feedback. So, it will go further and only forward! Good luck to you and good health.
Excelent idea to extend the Blade size. I learn a Lot from you. Thanks for your vídeos.
Алекс не обращайте внимания на резкую критику диванных мастеров, вы отличный реставратор и судя по всему человек, хоть я лично вас не знаю, к делу вы относитесь с любовью, у вас отлично всё получается,я повторюсь, я к реставрации не имею ни какого отношения и руки у меня из ж. пы, но смотрю вас с удовольствием, извините накипело 🙂 СПА СИ БО!!!
@ScrewsAndTools
Жыл бұрын
Добрый вечер! Благодарю за внимание и понимание ^_^
Good use of an old file.
@ScrewsAndTools
Жыл бұрын
Thank you!
LAWERYS SEASON SALT IS THE B E S T !!!
Thank you for the amazing video my friend the food looked delicious!
@ScrewsAndTools
Жыл бұрын
Greeetings! Thanks ^_^
finally you standing at the forge. it's a big step forward. hope you someday make your own knife by yourself.
@ScrewsAndTools
Жыл бұрын
Yeah! Thank you for feedback!
Работа очень серьёзная проделана! Уважаю таких людей! Ну а писать будут всякое и хорошее и не очень , люди же все разные. Спасибо за серьёзное отношение к делу!
@ScrewsAndTools
Жыл бұрын
Приветствую! Спасибо за интерес и внимание. Да, я как бы всегда рад критике, только вот построить диалог, мало кто может.
now thats a transformation! Awesome job as always!
@ScrewsAndTools
Жыл бұрын
Thank you so much!!
Hello Roadrunner hope you’re doing well and staying healthy. Another awesome video I hope you enjoyed your dinner 👍👍👍😊😊😊♥️
Добрый вечер молодец что руки растут откуда надо всё отлично реставрируешь продолжай в том же духе. Всех благ тебе и здоровья крепкого.👍👍👍
@ScrewsAndTools
Жыл бұрын
Благодарю вас за внимание и интерес! Рад обратной связи ^_^
Beautiful work! You ‘ve made it live again!
@ScrewsAndTools
Жыл бұрын
Thank you!
Мастеру большой привет из Москвы 👍🏻👍🏻👍🏻
@ScrewsAndTools
Жыл бұрын
Спасибо за интерес!
Чуть у холодильника дверь не оторвал🤤✌️
@ScrewsAndTools
Жыл бұрын
Хахахах))))
Great job forge welding the file to the end fo the axe for the new cutting edge. As always great video, I love to watch you work, keep up the great work boss man
@ScrewsAndTools
Жыл бұрын
Hello! Will do, and thank you so much for feedback!
That was just great! Loved the forging section.
@ScrewsAndTools
Жыл бұрын
Hello! Thank you so much!
You are super restoration. It turns out beautifully and very generous. The dish looks super delicious and excellent cook 👌
@ScrewsAndTools
Жыл бұрын
Hello! Thank you so much!
Ну раз есть "доселе", должно быть и "ныне".😉 Удачи Вам, батоно, и терпения!🤗 А по поводу хамов - не переживайте, они своей желчью отравятся.
@ScrewsAndTools
Жыл бұрын
Добрый вечер! Благодарю))) ^_^
Woww, that was great. The forging part was nice too "Good Form". Its a new level of restoration that has been achieved. Great work
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you for interest and feedback!
11:52 Amen! Same to you brother! I love your videos!! 🙏🙏👍👍❤️❤️
@ScrewsAndTools
Жыл бұрын
Hello! Thank you so much! ^_^
You're great artist 👍 restoration is so interesting, thank you
Your restorations are great
😁😁😁 Right at the end you're like, "Oh yeah, the axe" 😂. Forgotten about it no doubt what with that simply gorgeous looking plate of meat 👍. Once again a top job dude 👏👏👏. Thank you 🙏. 😎
@ScrewsAndTools
Жыл бұрын
Greetings! Yeah)) Thakn you for attetnion and interest!
I absolutely love watching your videos
@ScrewsAndTools
Жыл бұрын
Thank you so much! Really appreciated!
Всё отлично , дерзайте дальше . Вам терпения и удачи .
@ScrewsAndTools
Жыл бұрын
Привет! Буду! Благодарю за внимание.
Love that apron, Funny as always 🤣 😄
@ScrewsAndTools
Жыл бұрын
Thank you))
Thanks for the video. I am now very hungry!
@ScrewsAndTools
Жыл бұрын
Hello Scott! Thank you so much for attetniton! ^_^
Приветствую, Мастер. Я просто хочу сказать, что не пропускаю ни одного вашего видео, с тех пор как подписался❤ Очень нравится как вы делаете из ржавчины золотые инструменты, шашки, мечи и т.д. Также я очень люблю как в некоторых видео присутствует такой уют, как вы готовите какое-нибудь блюдо. Честно, сразу хочется оказаться там вместе с вами. И спасибо большое вам за субтитры, я всегда читаю их. А глупые комментарии от глупых людей будут всегда, я надеюсь, что вы на этом не заостряете свое внимание. В общем и целом, спасибо вам за ваши старания, буду ждать следующие видео.
@maxim_izhevsk
Жыл бұрын
Полностью поддерживаю ваши слова
@ScrewsAndTools
Жыл бұрын
Приветствую! Благодарю вас за внимание и приятный диалог! Успехов!
@ScrewsAndTools
Жыл бұрын
Спасибо вам!
It's a great attempt given that it is your First time forge beveling an axehead
@ScrewsAndTools
Жыл бұрын
Thank you! Yes, it's was my first time)
I always like watching your videos, you seem like a very humble and kind man with good craftsman skills 😉 👌
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you for your attention and feedback. To be honest, yes, I don't like to brag, or praise myself. don't know... what else to answer. Good luck to you)
Been a while since youve come out with an axe restoration, loved this one as always. great footage from the forge workshop too!
@ScrewsAndTools
Жыл бұрын
Hello! Yes, you're right. Thank you ^_^
Cool stuff always thanks 😎
@ScrewsAndTools
Жыл бұрын
Thank you so much!
@charlesstarlin6354
Жыл бұрын
@@ScrewsAndTools you are welcome thanks
@ScrewsAndTools
Жыл бұрын
^_^
Дужє приємно дивитися як Ви повертаєте життя старим речам. Чудова робота, чудове відео!
@ScrewsAndTools
Жыл бұрын
Привіт! Дуже дякую!
Another perfect restauration. I love it when you upload new videos :)
@ScrewsAndTools
Жыл бұрын
Thank you!
It's actually a hatchet . You did a nice job restoring it too. 😎👍
@ScrewsAndTools
Жыл бұрын
Thank you))
P.S. на этом, тест драйве, тоже выпить захотелось! Многие лета и доброго здоровья!)))
@ScrewsAndTools
Жыл бұрын
Благодарю!
Love your channel 🤩 p.s. amazing work my friend!
@ScrewsAndTools
Жыл бұрын
Thanks!
Хорошая реставрация! Спасибо за пожелания в конце) Вам того же!
@ScrewsAndTools
Жыл бұрын
Привет! Спасибо за внимание!
@user-pg3lp8ox8u
Жыл бұрын
@@ScrewsAndTools Топорище бы-чуть закрыть, т.е. чтобы продолжение линии РК приходилось на грибок
It's fuckin great to see you expand your skills with metal forging I can't wait to see what you do next
@ScrewsAndTools
Жыл бұрын
Greeetings! Thank you for interest and attention! ^_^
Прекрасная работа, а самое главное атмосфера прекрасная, с удовольствием смотри с кружкой чая. Было бы интересно посмотреть на реставрацию ТАНТО. Если будет такая возможность, сделайте отдельное видео, СПАСИБО))))
@ScrewsAndTools
Жыл бұрын
Приветствую! Есть мысли, есть. Думаю будет, что-то да и в этом стиле! Благодарю за внимание.
Great to see you at the forge! I hope you have instantly fallen in love with it and will continue to explore work in that space.
@ScrewsAndTools
Жыл бұрын
Hi! Yes, I really liked it, it's the first time in my life I've ever been a cowboy. It was extremely exciting
Алекс, топор хорошо получился, а ребрышки в духовке это вещь👍👍👍
@ScrewsAndTools
8 ай бұрын
Спасибо!
Ah bueno, estimado señor, veo que a esta altura ya está listo para sus propios proyectos desde cero. Suerte con sus próximos trabajos. 🔪🛠👍❤😀
@ScrewsAndTools
Жыл бұрын
¡Hola! Muchas gracias. Trato de aprender)
love the repair!! Now im hungry for plum sauce and veal!!
@ScrewsAndTools
Жыл бұрын
Thank you for attetnion!)
Nicely done Alex 🙂👍
@ScrewsAndTools
Жыл бұрын
Hello! Thank you so much!
Алекс! ты по праву заслужил вторую часть видео!!!!!
@ScrewsAndTools
Жыл бұрын
Спасибо за внимание!
I love your handy works !!- really amazing restoring skills !! - Cheers Rio / Brazil !!
@ScrewsAndTools
Жыл бұрын
Thank you! Very kindly
Beepbeep 🤓... Great restoration👍 Friend. Friendship from Belgium 😉🇧🇪🖐️🍖😋
@ScrewsAndTools
Жыл бұрын
Hey Zou! Greetings! Thank you so much for interest and attetnion! ^_^
Vc é um mestre Meu lindo
I love to drink grape juice with my roasted pork! But only after it's been fermented and aged in barrels for years...I call it wine! 😁
@ScrewsAndTools
Жыл бұрын
hahahah)) Thank you for attetnion and bon appetit)
Always loving your videos no matter what project Beep Beep
@ScrewsAndTools
Жыл бұрын
Thank you! Beep)
Что тут скажешь. ЛЯПОТА!))
@ScrewsAndTools
Жыл бұрын
Спасибо)
VERY nice restore!
@ScrewsAndTools
Жыл бұрын
Thank you!
Привет Мастер. Не обращай внимания на хейтеров их полно. Есть такие "люди", что только бы обгадить другого. Без этого не спится, не жрётся, не срётся. Делай своё дело, снимай видео, выкладывай. Смотрю с удовольствием, иногда даю советы)) и приятно когда они вам помогают. Хотя подписался только что.))) Удачи 👍🤝
@ScrewsAndTools
Жыл бұрын
Добрый день. Да вы правы. Более не стану. Спасибо, за внимание и интерес! ^_^
Thanks, That was Cool . . .!
Nice. Good job 😀🤙🏻
Excellent job!
@ScrewsAndTools
Жыл бұрын
Thank you!
Always enjoyable and entertaining
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you for your attention, I am glad to read the feedback!
Добрый день ! не знаю даже , что лучше топор или мясо , а может виноградный сок !!! ))) Молодец ! удачи вам ! Жду ,давно не было ножей !!!
@ScrewsAndTools
Жыл бұрын
Хахаха)) спасибо за вниманий. Ножен говорите. Я вот сегодня утром об этом и думал... надо бы что-то замутить
Алекс, спасибо Вам за просмотр, и, конечно же, ПРЕКРАСНАЯ РАБОТА!!! А к хейтерам и неликвидным неадекватам относитесь проще: во-первых, пускай пишут, и пишут побольше и почаще - тем самым продвигая видео в ТОП!!! во-вторых, будьте мудры, ведь как говорится: "всем не угодишь и всем человек не может нравиться"; так что риторически подходите к этому и берегите свои нервы!!! Уверен - Вы Хороший Человек!!! Желаю Всех мирских Вам благ, новых сил в творчестве, для созидания и вдохновения, а также процветания канала и разростания аудитории!!!
@ScrewsAndTools
Жыл бұрын
Приветствую вас! Благодарю за внимание и правильные слова! Будьте здоровы и успехов!
excellent work as always
@ScrewsAndTools
Жыл бұрын
Thank you! ^_^
you did a great job
@ScrewsAndTools
Жыл бұрын
Hello! Thank you so much!
Мастер вы просто все сделали классно ваше видео смотрю с удовольствием спасибо молодец
@ScrewsAndTools
17 күн бұрын
Спасибо!
You are the man,beautiful reconstruction on the axe,your talent just keeps shining through. I wonder what you could do for me,with your mind set,I’d come out looking 50 years younger.Lol.great video as always,keep it up.if theirs anything you could do for me I’m open for it.👍👍👍😎😎😎
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you so much for your feedback and attention! Good luck to you ^_^
Отличная работа сделано с душой!!! Браво автор, так держать!!!
@ScrewsAndTools
Жыл бұрын
Благодарю!)
Спасибо! Приятного аппетита!😀
@ScrewsAndTools
Жыл бұрын
Привет! Спасибо)))
Very entertaining!
awesome as always
@ScrewsAndTools
Жыл бұрын
Thank you!
There are lots of different ways to add a new edge to an axe. One way I’ve seen done a lot is to cut off the edge of the original axe head, heat up the edge, then split the edge of the axe head length wise then add the new material and hammer over. Then heat it all up and forge weld the new material to the axe head and grind and cut accordingly. With welding you have three different type metals being welded together. It worked for you this time. And the axe came out nice. A good job for your first effort. I applaud you. Your viewer from the other Georgia.
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you for your attention and feedback. By the way, your advice is also interesting, but this is for more experienced blacksmiths, I think. It's the first time I've done this. Greetings to you too from another Georgia))
Well done.😊
@ScrewsAndTools
Жыл бұрын
Thanks!
Magnífica la restauración del hacha, es usted todo un profesional de las restauraciones, da gusto verle trabajar, tiene usted todos mis respetos, un saludo desde España 🇪🇸. Y que le aprovechen esas costillas.🫡
Awesome transformation brother, that food looked great too although I thought you'd have saved some for your grandmother haha. Regards from here in the UK.
@ScrewsAndTools
Жыл бұрын
Greetings! Thank you so much for attetnion and feedback! ^_^
Your gloves are very pretty. Lol.
@ScrewsAndTools
Жыл бұрын
Thank you)) Ha))
Как всегда на вышнем уровне,браво 👏👏👏
@ScrewsAndTools
Жыл бұрын
Большое спасибо!
Greeting from Brazil
@ScrewsAndTools
Жыл бұрын
Hello! Thank you!
Well done
Im not judging, more like envy. Lol.
@ScrewsAndTools
Жыл бұрын
Thank you for attettnion!
Честно говоря, не верил, что можно "женить" Рашпиль с топором. Отличная работа! А ещё мне нравится, что он выглядит, как рабочий топорик, а не отшлифованная выставочная игрушка!
@ScrewsAndTools
Жыл бұрын
Спасибо! Я сам не знал этого ибо делал впервые и ковал.
good job
I like your other work and appreciate you trying to do something different. Not one of favorites of yours but you did a lot more than I did so I respect it. Keep doing your thing man much love
เป็นงานบูรณะที่ยอดเยี่ยมมากครับ🤠
Доброе время суток уважаемый Академик 🙌😊. Рад за вас уважаемый, как маленькое дитя🤗. Прочности вашей работы можно только позавидовать. А на вашей кухне такое искушение, нет сил. Здоровья вам и благодати в вашем нелегко но красивом ремёсел. ☝️🕊️Ваши ДОСТОЙНЫЕ 555555555555555.
@ScrewsAndTools
Жыл бұрын
Добрый вечер! Благодарю вас за внимание и добрые слова! Всех благ
Your apron show us who is the MAN of the house
@ScrewsAndTools
Жыл бұрын
Hahah))
very cool