Thank you! You were the only tv mount explainer i found who even mentioned about the VESA configuration.

@keeganrice7904

3 жыл бұрын

How do you take off the covers?

You made it possible for a woman to put a TV on her kids wall! Thanks!

This is more helpful than the brand’s actual installation guide for their own model. Thank you!

@takumif7056

8 ай бұрын

Um… this is the Brand’s actual installation guide. It’s their KZread channel lol.

Thanks. The instructions make much more sense and I can see that it’s ok to use two different patterns together if necessary.

Is there really no was to turn the metal plate on the front on its side? The holes line up perfectly but only when I have the part that gets secured to the stud is horizontal. I've tried to use these brackets to get to the holes but the square metal plate covers 2 of the holes.

Best instruction video I've seen in my entire life, an Oscar should definitely be given

We just fixed our tv after watching this video!!! 👍👍👍👍

In the end he didn't use the extensions those 4 pieces, that's what I was trying to figure out and now I see they could be used for ADJUSTING tv up or down or side to side. Instead of moving the wall stud mount base. Because I just need to lower it a little so it can fit perfectly.

Ok so i got this mount and didn't check out the maximum size. I got a 58" screen but it is vesa supported. Should it give any problem?

Ευχαριστώ πολύ για βοήθεια

Where do the black washers go? My hardware kit had individual bags labeled A-G.

Thank you so much!!

Genial. Gracias.

Do I need to add the extension arms if the holes on the bracket line up with the screw holes on my tv?

@MountIt

3 жыл бұрын

nope! The extension brackets are just for tv's that have a bigger VESA.

Trying to change my TV and I’ll be damned if I can get the old one off? I remember having to screw the mount to the back of the tv and kind of lifting it on, but can’t find those screws anywhere

Your amazing thanks!!!

mine doesn’t seem to swivel that much. it’s super stiff and doesn’t extend open all the way. do i have to loosen the screws a bit or grease it up?

@MountIt

3 жыл бұрын

Hey Jenny! Yes, go ahead a loosen the screws so you can fully function your wall mount! If that doesn't work, you're more than welcome to put some grease on it. Then if that doesn't work and you're not liking the functionality of the mount, please contact our customer service

@nene2542

3 жыл бұрын

I’m having the same issue with mine. Did you get yours to swivel all the way? I can’t figure it out

What tool and size of tool do you use to screw on the bolts that go into the wall? I’m having a hard time with that part.

@KxngKUDA

Жыл бұрын

I can't tell you the size, but that was deff a power drill with a Philips head attachment, and a socket wrench/ a ratchet to tighten further

Now how to remove the plates so I can get to the screws 😣

Hi...thanks for the video. Do i drill pilot holes on the wall where i marked with the pencil in line with location of the stud in the wall. Thanks

@cringealert9320

3 жыл бұрын

Yes smaller than the bolt going into the wall for proper bite

What size socket do you need that was never notated

What's the easiest way to remove the decorative wall plates? Having trouble getting them off and I don't know if I'm missing something. If I have to break them I will, but would rather keep them intact if possible.

@MountIt

2 жыл бұрын

Hey Matthew, sorry for the late response. We hope you didn't break them off! You can remove the decorative covers by slightly applying some pressure from the bottom of each piece. There is a locking tab on the outermost edges, which we are trying to prevent from breaking. Please ensure that you are using a motion to push the pieces out ( up and down, since it is mounted to a wall)

@SlabzNBangers

2 жыл бұрын

@@MountIt thanks for the reply, they were really stuck on there pretty good but I was able to get them off. Thanks again.

@MountIt

2 жыл бұрын

@@SlabzNBangers We're sorry about that! I've personally noticed that they "get stuck" when they aren't removed every so often.

Hey does the 400x400 also cover the 300x200 yeah I presume it does thanks very helpful video

@kathyfowler1274

Жыл бұрын

We’re you able to use it on your 300 x 200? That’s what we have and we are having trouble getting it to work

love this😍😍😍😍 thank you so much wow

Do I absolutely need to use the spacers provided with my bracket?

@MountIt

3 жыл бұрын

No, spacers are absolutely not necessary. They're only there for monitors that need a little more room.

i'm about to return this TV wall mount because it was so complicated with many screws. Compared to 2014 i put a 40inchs tv (full swivel arm mount) it only have 6 screws (2 for the wall, 4 for the TV). Can someone explain to me why the latest TV mount have so many screws..

@RaymundoLopezH

3 жыл бұрын

If you look at the video you will know! It’s for bigger TVs that need the extensions!! Read the manual and you’ll know which screws you need!

Very nice tutorial

Thank you for letting me know

They didn’t give me the pointed screws to put in the wall just the blunt ones?

nice video! Thank you

I got a 55" tv 22kg, and the store employee got me this wall mount that says 26"-47" and max 25kg. Will my tv be secure on the wall or will i get problems?

@MountIt

3 жыл бұрын

This mount fits 26 - 55 Inch Flat Screens up to 66 lbs and VESA 400x400

@Nisrinbeiba

3 жыл бұрын

Hola sigues a este senior

@cringealert9320

3 жыл бұрын

Obviously not jackass

I need instructions about the tilting, is so difficult

What if you don't have studs i have plastered walls

Trabalho muito bem realizado! Parabéns 👏👏👏👏👏

Thank you!

Thank you so much Sir ..

Can you explain how we make this tilt please.

Do I have the hold up the whole TV while mounting it to the wall.... because 😬

The bolts on mine are super tight. So it won’t swivel all the way. I tried loosening them but it’s so hard🥲

@aussie8114

2 жыл бұрын

Oil them.

@nene2542

2 жыл бұрын

@@aussie8114 I tried that and they still wouldn’t budge so I just returned it

@aussie8114

2 жыл бұрын

@@nene2542 That’s a shame. I need to get a bracket like this, I think I will check it’s rotation before I take it out of the store.

why in the hell would you put the tv on the bracket all put together and then fasten it to the wall not me

Thank you ❤

Exellent help,thankyou

Thanks for the video. Just what I needed.

@rene8032

2 жыл бұрын

2

@rene8032

2 жыл бұрын

22

Just set mine up, hope it don’t fall 🗿

HOW DO YOU REMOVE IT ?

Garabage mount, the only tv mount I’ve ever owned where the tv has to be installed on to the mount, while your bolt it to the wall.

didnt get the right screws to put into my tv

So no vesa for 300mm X 200m ?

Does this work if there is a brick wall where I want to mount this?

@Kovadamt

3 жыл бұрын

Probably, but don't use bare screws, you will need a dowel in the wall first and the screw goes into it.

Thanks

So you don’t need the extensions?

@MountIt

3 жыл бұрын

If the holes for the VESA plate line up with your monitor/TV, then yes you do not need the extensions. If they don't, then no, you need the extensions

Great one👌🌠

You don't explain the offset

Thank you! This video was super helpful! I'm buying a drill and drill bit, I have never used one before, can you please tell me what kind should I get and the size?

@cringealert9320

3 жыл бұрын

Hire somebody if you can’t answer those questions on your own

@MountIt

3 жыл бұрын

@@cringealert9320 lol

@MountIt

3 жыл бұрын

Hey Faith, we recommend buying a whole drill bit set. It's fairly simple to install. Make sure you install on the stud

@EndrichReveil

3 жыл бұрын

@@MountIt what if I dont have a stud and only a dry wall?

@MountIt

3 жыл бұрын

Hello, unfortunately the mount will just fall. I will link you to just a nail in mount. mount-it.com/products/mount-it-no-stud-tv-wall-mount-mi-376?_pos=1&_sid=84c16927e&_ss=r unfortunately we are sold out at the moment though@@EndrichReveil

Is it useful for mi 4A PRO 43inch? Please give reply

@MountIt

4 жыл бұрын

Please look at the VESA pattern of your TV, and see if it's compatible with our product

@S55_Marquise

4 жыл бұрын

I got a 43 aswell

There’s no instructions on how to attach the back plate to the wall mounting arm, I’m so lost right now. And this didn’t help either.

Does this mount tilt up and down?

@UserUser-ov2ig

3 жыл бұрын

Yea

@ryanmiller7348

3 жыл бұрын

Mine is tilted tooo much and its post to be flat...could i got the extention arms off?

@robh3702

2 жыл бұрын

The plastic bolt behind the tv will swivel it up and down, but I believe it’s the flaw on the Mount. The tv is holding the weight of that screw so it makes it hard to unscrew it

Will this work under water? I want to put a tv in my fish pond to keep the little fishies happy 🐠

I love your voice btw😜

i just put one up with a 55 inch tv the tilt seems to make it tilt what do i do

@MountIt

2 жыл бұрын

Seems like the tilting feature is doing it's job? I guess I'm confused by your statement.

@davidmetzger5221

2 жыл бұрын

@@MountIt thanks for your text hope my son will except this and be happy

I just bought a LG 55” ,will this work with a 55”?😰

@MountIt

2 жыл бұрын

Yes it will

I interfered with the black adjusment and my television is shaking side to side

Génial

thanks dude, but i somehow broke my tv n now i’m sobbing like a 11yr

My TV only has four screws on the back

Can I rotate the tv to make it portrait

@MountIt

4 жыл бұрын

Unfortunately, this product model does not allow you to rotate your TV/Monitor to portrait. Check out our website if you're looking for models that allow you to do that. www.mount-it.com

Do I need a wall stud ?

@simonashton6026

2 жыл бұрын

How'd you get on? U didn't put the holes into the stud

Can I attach a sound bar with it

@MountIt

2 жыл бұрын

Yes

Will not work on a older JVC flatscreen sucks holes are to close 4 inches by 8

@MountIt

2 жыл бұрын

We're sorry about that! Did you look first at your VESA pattern of your TV to see if it would match with our mount?

So can it swivel around?

@MountIt

2 жыл бұрын

It can swivel from left to right

Why no wall plugs

@MountIt

3 жыл бұрын

Hey Keith, the anchors are not necessary for this install, but they do come along in the packaging

Y’all should include it doesn’t work for dry wall🙄 I now have six brand new wholes in my wall 🤬

@MountIt

3 жыл бұрын

Hello, in the very first step of the installation process, it states to locate the wall stud... meaning this is meant for installing into studs or concrete, not just into dry wall.... You can always hang a big picture frame to cover the holes now.

@j_nihilist5849

3 жыл бұрын

@@MountIt hahaha good answer....”hang a big picture 😂😂😂😂

@dotties123

3 жыл бұрын

Use gripit fixings for dry wall can use for any tv size /weight

@nehhietiden3534

2 жыл бұрын

If you do not want to hang a picture frame that is fine. Just fill the whole with a white tooth paste and paint over it.

Doesn’t work with Hi-Sense 40”

What happens if its used on dry wall

@MountIt

4 жыл бұрын

Your TV will fall. Please use only on Stud. If you're looking for a product for on;y drywall, I would recommend, MI - 376 mount-it.com/products/mount-it-no-stud-tv-wall-mount-mi-376

@boom2thesteps870

3 жыл бұрын

this would of been fucking nice to know

Mine didn't come with the arm extenders

my tv ot come that holes :(

@cringealert9320

3 жыл бұрын

Your tv is old

I’m trying to put up a 40inch Vizio... I’m so fucking confused on the extension part n. I literally gave up I must be a retard

Instructions are good , instead of loud noise ( music ? )

Do you have somebody speak spanish.

.mine woked .

The nails wont fit in my tv!!

@MountIt

3 жыл бұрын

Nails?!?! I really hope you're joking

@Nu00dle

3 жыл бұрын

@@MountIt nails, drils, or whatever lol Wont fit back of my 32inch tv

@MountIt

3 жыл бұрын

@@Nu00dle Hahah just giving you a hard time! By chance do you still have the box the product came in with all the proper hardware?

@Nu00dle

3 жыл бұрын

@@MountIt yes ! It seems like they dont have the size for my tv. Which i found out by reviews Since its common for my tv

@MountIt

3 жыл бұрын

@@Nu00dle There should be two sets of screws that you can choose from for the back of your TV

Awesome!

hola

❤ 0:25 0:25 0:25

😊😊😊

$

Worse mount ever… not a one person friendly mount, that’s why at the end of the video they won’t show you putting the tv on the mount

@MountIt

Жыл бұрын

At 3:41… it shows a TV on the mount. Im sorry you’ve had a bad experience with it.

@Fedeojehoff

5 ай бұрын

@@MountItDUH you show it when it’s mounted but don’t show the pain in the ass to screw it up there… it is the worst tv mount ever

@UniquaDaBackyardigan

2 ай бұрын

@Fedeojehoff, probably bc it wasnt a pain in the ass for them. Why would you randomly expect other people to have the same experience as you, then cry about it when they don't? That's moronic.

Da vuelta la wea

my shit keep falling out

Taking mine back. I don't have time to fuck with this mess

@angiemazerolle4741

5 ай бұрын

0:25

@angiemazerolle4741

5 ай бұрын

0:25 0:25

Thanks