Excellent attention to detail and editing is on point!

Your mate mentioning the boosting brakeline saved me, Checked it after this video and mine was clean off haha great video lads

Editing is on point👌🏽

Nice Lux. I like the lights.

Took me a week to get a bolt out of my leaf springs😂 tried everything but being right next to the fuel tank I couldn’t use an oxy torch or grinder. in the end we had to slowly cut it with a coping blade

I would have been good if you video recorder Everything specially the gear lever bit. Out of all videos this one is the best because your explained everything nicely lot of the other videos didn't only 50%. Good job guys 👍👍

Nice mate!

Hey mate quick question does the long entry staino fit an old safari snorkel hole?

How did you go about the bullbar? Being the fact of lifting the body but wouldn’t the bullbar stay where it is?

Good video helpful info but my goodness that bumper looked heavier then the vehicle itself.

Hi guys, an you post the link to the kit please? I would like to try and order this delivered to Europe… thank you.

Top video! Editing is heaps good !! I had a massive issue with the radiator aswell! I’m just curious to know how the bullbar was still able to line up with the headlights at the end ?? Mine has a big space when I was done ?

@WillsLandcruiser

3 жыл бұрын

Moey dntworry In the time that I went home for the night, Ben made brackets for his bullbar so that it was also raised 2 inches. It’s a fairly simple process but if you’re on Instagram, Ben would be happy to talk you through the process! His account is @renboss2000

How did you fix your 4wd gears

Does it actually make a noticeable difference?

How will the body lift fix his tire scrubbing on the control arm

@WillsLandcruiser

3 жыл бұрын

I think he wants to put bigger tyres on with an offset to fix this

@Adsjabo

3 жыл бұрын

Exactly my thought too haha

great video mate. can you fit 33s with a 2” lift on a hilux?

@WillsLandcruiser

3 жыл бұрын

Waik hey mate I don’t own a hilux but I just had a chat to Ben, he reckons if it’s the same model as his and the tyres don’t have an offset, you’ll get away with it. But if you have an offset they might scrub. It does depend on your model and how much the suspension may have sagged though!

@kianm8441

3 жыл бұрын

Will's Landcruiser Mods thanks heaps mate

Just thought of something, What if you have a front mount intercooler

@WillsLandcruiser

2 жыл бұрын

Well the intercooler would be mounted to the body, and the engine is staying put. So you might get away with it if you have heaps of flex in your hoses, but otherwise you’d need to make a drop down bracket 👍

@DoubleSlayerXXX

2 жыл бұрын

@Will's Landcruiser Mods Update: Intercooler actually fits alot better with the lift

I'm doing mine at the moment, can you put the extension shaft below the original one?

@WillsLandcruiser

3 жыл бұрын

Mr Shinybald I can’t see why not. I think the way it separated just kinda lent itself to putting the extension on top, but it should work either way

@mrshinybald2739

3 жыл бұрын

So my extended shaft is rubbing on the firewall any idea how I can pull it down?

@WillsLandcruiser

3 жыл бұрын

Mr Shinybald did you only slide the extension on like an inch?? The two extension sleeves should be touching like shown in the video. I’m sure you could try manipulating them so everything slides down a bit? Just make sure there’s enough sleeve over spline so it’s going to obviously be sturdy enough to act as a steering column

Nice work. What about the shroud from under the bonnet to the intercooler? Does it still seal?

@WillsLandcruiser

3 жыл бұрын

I think because the body lifts and the engine doesn't, the intercooler no longer seals on the bonnet. In the near future, Ben is going to make his own intercooler lift to suit this change and so it seals once again

@mymistymountainhop

3 жыл бұрын

I believe vmn make a specific spacer for between intercooler-bonnet. Would love to see more videos with Bens hilux

@WillsLandcruiser

3 жыл бұрын

mymistymountainhop I think he was keen to save a dollar but I’ll absolutely pass that information onto him! Thank you and I will have to let him know you said so, he’ll be stoked 😂😊

@benross1342

3 жыл бұрын

mymistymountainhop will and I are planning camping trip in a couple weeks and if you’re lucky you’ll get another video and get to hear my hilux 👌

@mymistymountainhop

3 жыл бұрын

Awesome. I look forward to it!

Did u raise your bullbar to suit?

@WillsLandcruiser

2 жыл бұрын

Yes he ended up buying a new bar made for the 2” body lift 👍

@linkalpen4011

8 ай бұрын

Didn't you weld a piece onto original one and make it fit?

Are you able to get in contact with me man? Just having a few problems with my radiator drop and need some advice/ photos

@WillsLandcruiser

Жыл бұрын

If you’re on Instagram, flick a message through to @another_white_hilux

At what point did you realise lifting the body wont change the fact your tyres scrub control arm? 🤣🤣🤣🤣 simply a new set of rims with a little more negative offset would be the easier option lol

@rotam8680

3 жыл бұрын

any excuse really to body lift

@jawogg7079

10 ай бұрын

big car go brr yay