Hoosier slicks, skinnies up front, half shafts, McLeod twin clutch, 1 PC driveshaft, vertical links, BMR lockout, good air, 6k rpm launch sold shifts , 10.95 at 124 . none of this stuff adds horsepower either. great runs man shows how awesome a little 302 cu in motor natural aspirated can be. keep vids coming , good luck

@MrEdmundF

Жыл бұрын

2017 or 2018 GT?

ouch that clutch burn hurts my heart

@WinZard

7 жыл бұрын

Kevin G rear main seal maybe? ouch......

@MustangLifestyleTV

7 жыл бұрын

+Mi•cha•el's nature of the beast trying a 2nd gear burnout with too much grip. After it was all 1st gear to ensure no slip

@MustangLifestyleTV

7 жыл бұрын

+Mi•cha•el's the RMS is fine, just got the stock clutch hot running it on the track and asked too much of it. Look for a fix coming very soon

Great job guys, very impressive. Dont forget part of the bragging rights are getting that time with a 6-spd too. Its one thing to mash the pedal and hang on while the automatic does the work, but another when you gotta have the ability to be quick with the stick.

@bighomieJ5X

7 жыл бұрын

Perry DiMarco exzactly what im saying ,its eazy to stall a car at the light then let a trans brake go or release the brake pedal. real skill is to bang gears in a mansmission!!

@donsmith8126

6 жыл бұрын

Perry DiMarco preach

Just need some more practice . Just remember everyone that's talking shit they are all pro drag racers and ran low 9s with zero errors they're first time at the strip

Congrats Scott, one hell of a run! 11.3 daily driver. Holy shit that's fast.

Hell yeah, sick run Scott! I can't wait to review that beast. 👍

@DaltonP386

7 жыл бұрын

RIP FBO

HELL YEAH!!!!! What a run, very impressive time and speed for bolt ons. FORD = First On Race Day

Guy with the broom at 5:50 is like "move out of the way please" LOL

@MustangLifestyleTV

7 жыл бұрын

Lol his ears were probably hurting. I know mine were behind the camera Lol- Andrew

Hey guys I hope you enjoyed this one! Scott drove the crap out of the car! It took a few tries to get it right but man did Scott get it right! If you have no seen the full build video be sure to check it out now! The video includes install of parts and dyno at VMP Performance: tube.com/watch?v=oNF7GZ2mm9Y

@isiahthompson-carter6777

7 жыл бұрын

Mustang Lifestyle Do you think Andrew and Scott can drag race to see who's car is faster?

@bryanhallman8183

7 жыл бұрын

MGW short throw would keep Scott and Ashley from missing 3rd with the Tremec. ;-)

@kanalos123

7 жыл бұрын

Mustang Lifestyle dude! Is Scott from Detroit? And are u at Milan dragway?

@fredboy007

7 жыл бұрын

Bryan Hallman Issa Getrag

@alimohammedbloushi9379

7 жыл бұрын

Mustang Lifestyle Hi

I have been looking to get a 5.0 and these videos just make me want one even more.

this makes me rethink installing my vortech... My 03 cobra ran 11.2s at 122 with 490 at the wheel, if my coyote can do that NA then why install the blower and take away the reliability and add the risk. Congrats guys!

@STILLNIGHTPEARL

7 жыл бұрын

Ryan Fonseca I would still go with the blower, just get it tuned right, don't go crazy on the boost, full exhaust, E85, call it a day. You'll still be way faster than this car full weight and everything.

@91Wildcat700

7 жыл бұрын

Ryan Fonseca depends on how fast you want to go. If you have a Cobra and Coyote have the Coyote be the reliable daily and then the Cobra be the track car that's still street legal.

@1234zcrom

7 жыл бұрын

Ryan Fonseca i think you should go with the blower. In the intake manifold install vid Scott pegs the rev limiter each run to 7800rpms. I assume these runs are no different. I think thats just as bad if not worse on stock internals than a blower. At least with the blower you dont need 7800rpms to run 11s. imho a gt350 manifold in a gt coyote without gt350 internals doesn't mean its safe to run at near gt350 motor redline, but these guys are crazy that's why I love their channel lol

@riceetr1260

7 жыл бұрын

+1234zcrom same internals as the boss 302 of the previous s197 generation and that was revving just as high from the factory. these motors don't hurt revving high , if they were hurting revving that high then they wouldn't build a ton of power all the way to 7500 with the manifold change . they need to rev

@Royalties500

7 жыл бұрын

Ryan Fonseca I agree 100% my own 03 cobra FBO (ported blower also) ran 7.0-7.1 @ 93 in the 1/8 with 1.6 60's.... if I can replicate that n/a and trap 120's I'm happy

Wow, great runs!! My heart dropped when the clutch "smoked" instead of the tires. Amazing it still stood up to more runs, that says a lot for the clutch. A whole second, that's pretty damn good!! Your the real deal, from making the car look better, sound better and perform better but more importantly you can drive it to it's max! Great job!! I guess you're not just a Mexico burnout queen...LOL...LOL

Quicker then I thought, impressive time slip Scott. Kudos!

*CLUTCH FAILURE - BECAUSE you didnt do your burnout at the leading edge of the burnout box where its still wet. You NEVER NEVER EVER try to do a burnout that far in front of the burnout box. Thats where the VHT is and its the stickiest. You roll into the water, then creep to the edge of the box Stop there and start the burnout. At good smoke, you let off the brake and let the burnout roll out into the sticky stuff. It will slow you down when your tires hook. But for the love of god stop doing what your doing.

@velr50gt

7 жыл бұрын

LMBC6Brian someone that knows the proper way!

@robfrmny21

7 жыл бұрын

LMBC6Brian the way he does his burnout is a lesson on how to break stuff

@mjcmustang

7 жыл бұрын

He said it was his first time on those tires too so cut him some slack guys. We all start somewhere..

@craiglaidlaw4758

7 жыл бұрын

Thank god you said it. That poor mustang :(

@TheJosephayal

7 жыл бұрын

I sniff sweaty smelly hot chiks stained Panties

Congratulations Scott! Now that's. Putting in work!

Amazing, that last run was some great shifting,

Gets me excited to get mine to the track. Got a few more special things to get

The real meaning of a BEAST

Been waiting for the new footage! Enjoy the videos as always!

Awesome run! That launch was nasty. I have the exact same setup without cats. Dynoing Sunday 🙌

@BillySAw951

5 жыл бұрын

btow1105 what did u get catless adds alittle more flow and power

@camarosaregay7943

2 жыл бұрын

What’s ur setup

Congrats Scott that's incredible achievement for NA making us mustang fam proud !!

You got that time bc you had the perfect amount of spin, you didn't dead hook or spin half way down the track

Grats Scott! Good run!

So a stripped interior too? Based on the early part of the vid? I ran a 1.77 60' and 12.5@115 in my 2013 automatic base 5.0 with just a tune and K&N drop in and properly warmed Michelin Pilot Super Sports.

Especially your cobra man, I'm getting my first car in a few months and it might be an 01 cobra, something I can mess around with

The biggest mod on that car is the driver!

Congrats Scott last run was a beauty 👏🏻👏🏻

I wonder what i can get at orlando speedway on my 16 gt. I have a lund tune (on 93 currently), a pmas intake, and long tubes. Running on a 6r80 auto with 3:55 gears

@mache2784

Жыл бұрын

I have the same setup in a 15 premium gt. The key here is the E85, get that and you could probably run a little quicker time. I have no e85 near me so I do with the 93 tune.

@Tang5oh

Жыл бұрын

@@mache2784 yea im on a flex tune to run e as well but likewise e isn like half an hour or so from me

Loves the wheels and tires set up. Sweet combo

That just looked like a ton of fun.

Awesome run. Just have headers to do to catch up with your setup.

she runs hard bruh and I'm a Chevy guy telling you that I'm impressed

Congrats, and hella good driving on that run!

All the mods you said aren't full bolt on but dam that impressive

I remember my first time at the track too,cute.

Nice launch on that last pass! Perfect amount of slip. Congrats! What rules does that track go by? I remember back in the day people getting kicked off the track for running sub 12 sec passes without a cage.

Man, who knew there were so many professional drivers in the comment section?!

@MustangLifestyleTV

7 жыл бұрын

#drivermod

Congrats!! dam and no forced induction,badass. Gotta save my pennies for the coyote swap for my cobra,lol. Im back at $0 now though :(

That launch was crazy

My 15 has Corsa longs, xpipe, mufflers. E85 Lund tune. Only trapping 113...a bit disappointing.

put a nitrous plate on it now

Good work Scott!

Scott ran that because he saw the Camaro in the other lane 😉

@MustangLifestyleTV

7 жыл бұрын

+A. P. Damn right lol

Man he knows how to drive that car, way too go bro

You gonna cam that mustang sometime?? That would be absolutely sick, great video btw

love you guys, your awesome and have the baddest cars out there😍

@MustangLifestyleTV

7 жыл бұрын

Thanks! :)

Nice fuckin run man! That thing was scootin

Well done man impressive!!

Hell yeah nice run!

Scott...GREAT RUN !......Are you running 3.31 rear? I notice you went thru the traps after having just shifting into 4th. Do you recall your RPM in 4th at the 1/4 mile mark? Thanks.

sick ass time scott!! great video

11.3 from bolt ons is fucking fast

Damn. Watched a view of your videos...you beat the hell outta that thing lol.

Great job Scott

That things fucking moves!

I fucken love you guys!!!! You guys entertain me when in bored!!! And SCOTT I HOPE YOU READ THIS BUT YOUR CAR IS AMAZING, THE WAY IS SOUNDS JUST MAKES ME WANT TO MAKE MINE SOUND THE SAME. LOVE YOUR CAR

Fast times for sweet car.

congrats on the fantastic runs Scott 👌 car hauls ass man

ok maybe you were right about the rt nice run waybe i will see u out there when i get another motor for my 03 gt

@Widow5oh

5 жыл бұрын

What’s gears

Just wondering, how does that car handle with just lowering springs? I really love these mustangs.

@MustangLifestyleTV

7 жыл бұрын

Handles fairly well. Tires also make a difference in handeling

Congrats! I would have called it a day after that 11.3 @122 run anyway. Were you on the stock half shafts? Also do you think the Cobra Jet intake would have performed better? I am trying to decide between the two intakes. Thanks!

@MustangLifestyleTV

7 жыл бұрын

Yes stock halfshafts. I typically suggest gt350 for s550 and cobra jet for 11-14. GT350 fits under the stock hood while Cobra Jet does not on S550. The Cobra Jet usually has a slight edge on performance but personally I would go GT350 again before trying to go Cobra Jet route.

@pheonixfps9248

2 жыл бұрын

Ironic, 4 years on and a ported 2018 manifold trumps both.

Those welds rims what a the size of the rim and tires ??.

Congrats!!!!

awesome guys 11.37 kick that Camaros butt!!!!!

Where can I learn how to properly launch my manual GT? I am pushing similar power with NT555R but I either do 2.0 on the 60 ft or break something if I go any harder... Help!!

Have you had any issues with the VMP E85 tune? I have one on my 2019 GT and it would randomly dip under 500 rpm’s and turn off. Doesn’t happen often but it has happened.

Great job guys

What weight saving mods are done to the car.. car runs good.

Nice runs. Don't forget to mention what was removed. I have same headers/cats. Did the CAI really make a measurable difference? GT350 intake?

Y'all making me wanna come over to the dark side lol good shit fellas

Did you put fluid down for the burnout? You should never do a burnout dry

very, very impressive!!

That was badass. Driveshaft should be scotts next mod. It's easy to do. I have a 17 5.0 and I'm building very similar to Scott's 5.0. It was awesome to find quality video on a bolt on S550. I have kooks Hpipe exhaust, kooks catless headers. GT 350 intake, mani, and TB. With E85. And aluminum DS. Should be interesting to compare.

@MustangLifestyleTV

7 жыл бұрын

+Bryce Pratt I will be! Looking forward to your results! Half Shafts and a Single Piece Drive Shaft are definitely on the list for this build

Do you think they dyno tune from vmp is way better than a vmp email tune? I have the same mods but no where near as fast around 12.5s

Very impressive!

No way this heavy car is running without at least a 100 shot.

@michaelharris748

6 жыл бұрын

is that all you do is talk shit? I've seen this for a long time but really never say anything about it but it's getting old bro it's obvious you're a Ford hater and never wanna give them credit but wake up and smell the roses man the newer 5.0s are dope af and can run times like this with bolt ons and minor weight reduction with a decent driver and it don't take 100 shot if it had 100 shot it would be deep into the 10s at over 130 mph probably. spend some time doing research instead of bashing everyone's shit have a nice day

Congrats, that was a boss run.

@MustangLifestyleTV

7 жыл бұрын

Thanks!

That car is fast. Nice shifting. Driver MOD

Damn that car would be a monster with a procharger added to it.

LS what???... Solid run man. it feels good when you drive it right don't it, it returns the favor.

Put some 4.10 gears in that thing and you’ll be in the 10s

Very NICE. How much HP?

Good video looking for fbo with Circle D converter times

After seeing this Stang mode has less mods and is just as fast if not faster now with his headers

@kerrysnyder9810

5 жыл бұрын

Stangmode runs an automatic 2018 Mustang GT. Different motor and trans. Different car.

Long live the manuals - good runs, anything done to the MT82?

great job scott but still need a lil more ponies :)

very nice , now that a great time. i cant wait for my wheels and drag radials to come. U still have stock Half=Shafts?

@MustangLifestyleTV

7 жыл бұрын

Stock half shafts, stock driveshaft, and it was a stock clutch....

@AlekseiBykov

7 жыл бұрын

Mustang Lifestyle he half shaft won't hold much :) I'm afraid to snap my with the DRs :))) but will c how ill do that's my next for this year half shalfs and driveshaft.

To be honest after I would have burned my clutch like that I would have stopped and went to a shop the next day.

looks like hard work does pay off great run,with that tune does that permanently turn trac control off?

@MustangLifestyleTV

7 жыл бұрын

The tune retain traction control. It can be turned off with the stock buttons.

That right there is why I always...always....always do a burnout on the edge of the wet area (WHERE IT IS STILL WET). The heat of your tires will burn away any water and then I let off the brake give it more gas and roll out my burnout into the VHT then quickly push in the clutch. Has worked every time and my clutches thank me. Oh and get a line lock. You seem to struggle a bit with the dumping and brake (it a shit way to do it anyways so don't worry). Just get it all ironed out 3:00 forward made me want to scream "Stop stop stop stop!" to you. 4:30 you should have just aborted and stopped beating on your car for literally nothing. At the track if you don't get a clean start just stop to avoid pointless abuse. Oh and killer last run! Very good shifting and launch. Damn good 60'

How much power is it pushing lol

Dude, you can let off at the 1/4 time sign. Dangerous to keep going under full throttle when your closing in on the end of the road.

@dangerousfreedom4965

6 жыл бұрын

MH motorVlogs not to mention that track has a very short run off Area past the finish line

What rear tires are you running?

Spectacular. Nice build Scott. Now, to get Ashley a blower.

@MustangLifestyleTV

7 жыл бұрын

+jkrigelman #AshNeedsASupercharger!

What size tires are being used in the rear?

what rpms did you launched it in the last run?

@MustangLifestyleTV

7 жыл бұрын

+ricardo simon 5500

nice solid run

Will you guys be getting 2018s?

Need to fix that wheel hop though

nice run