Love the joy and encouragement you share on your channel nearly every day 😀 ❤ 😊

@tazman-kennyfuller

2 жыл бұрын

Thank you Tom. So glad you are here and glad you find good here buddy. Love ya brother. 🌲❤🌲👊🪓

Finally I know what to do with that hose, I built my 372 a week ago, and could not figure out where that line would go ! Thanks Kenny ! Love and Kindness all around !

@tazman-kennyfuller

Жыл бұрын

Hey buddy. Glad it helped. Thank you J. Lovin it🌲❤️🌲👊🪓

Filed saws today, made me smile thinking of you in the saw shack. It is time to start cutting again. I am excited, it has been a rough couple of weeks, Thank God for you and all the other folks on KZread to keep me going.

@tazman-kennyfuller

2 жыл бұрын

Right on Kelly. Sorry to hear of the rough patch. Glad we can help get through some of that stuff. It's why I am here. To help however I can my friend. 🌲❤🌲👊🪓

The beauty of your channel... there is always something to learn, thanks again TazMan. Have a great weekend 🔥

@tazman-kennyfuller

2 жыл бұрын

Thank you Patrick. Glad it was helpful. 🌲❤🌲👊🪓

Heck yea this place is bliss. Energy is what drives me. 2 stroke is just a bonus. I want to see the taz saw collection all together 😁❤️‍🔥 this place is heaven.!!!!☀️🌙

@tazman-kennyfuller

2 жыл бұрын

Thanks Billy. I think we can make that happen buddy. 🌲❤🌲👊🪓

@Sensei948

Жыл бұрын

@@tazman-kennyfuller Friend, the revolutions for 372 xp oe 13600 after warming up are ok? oil 33:1 LS + husqvarna ?

@tazman-kennyfuller

Жыл бұрын

@Sensei948 thank you Sensei. 13200 to 13500 on a stock 372 is great and 32 to 1 ratio is good also. 🌲❤️🌲👊🪓

LOVE THE ANTLER HANDLE ON YOUR WOOD STOVE

@tazman-kennyfuller

2 жыл бұрын

Thank you Steve. Great to see you buddy. And it doesn't get to hot like the metal. Works nice. 🌲❤🌲👊🪓

Tazman is rockin. Ya brother. You rock. YeeeeeeeeeeeeeeHaaaaaaaaaaaaaa! Would love to see all them saws in a row. 🤣🤣🤣

@tazman-kennyfuller

2 жыл бұрын

We rollin buddy. Hahahahahhahahaha thank you John I will line em all up sometime fir ya. Love ya brother. 🌲❤🌲👊🪓

Love you my friend. Sending your gift on Monday. Just talking down to earth and heart to heart keeps me coming back Taz!

@tazman-kennyfuller

2 жыл бұрын

Thank you Tom. Wow buddy that means alot. So glad you enjoy what I get out there. Love ya brother. Thank you for everything you do for this world. 🌲❤🌲👊🪓

you are a good person TazMan; thank you for the tip ! good luck

God Bless and Protect you TazMan for sharing your life and wisdom with your united in love community:)

@tazman-kennyfuller

2 жыл бұрын

Thank you Finom. Bless you my friend. 🌲❤🌲👊🪓

Awesome way to purpose those noodles!! Love it!!! Great job on the xpw nice saw brother keep on rollin my friend!

@tazman-kennyfuller

2 жыл бұрын

Thanks Justin. Great Firestarter for sure. Love this saw. She rips for a stock saw. 🌲❤🌲👊🪓

Bless you TazMan:)

Thanks sawrus good sound

@tazman-kennyfuller

2 жыл бұрын

Thank you very much Darrell. Hope you have an awesome week buddy. 🌲❤🌲👊🪓

Awesome video. Awesome shirt too!!

@tazman-kennyfuller

Жыл бұрын

Hello and welcome J. Thank you for your support. Glad you liked it. 🌲❤️🌲👊🪓

Tazman you need to retire then you can be OFF every day like me 😂 Glad you got your saw running good again, love the saw shack videos

@jaythe306snowmexican

2 жыл бұрын

I need to retire too buddy 😁😎

@tazman-kennyfuller

2 жыл бұрын

Oh my goodness Oldtimer that wood be awesome. So glad you like the Ole saw shack. 🌲❤🌲👊🪓

I'm gonna have to get me one of them BellHopper shirts for sure !!

@tazman-kennyfuller

2 жыл бұрын

Thank you Spineless. Great to see you buddy. Oh man they sure are nice shirts. 🌲❤🌲👊🪓

Awesome you got the saw running great again. The vent line position is definitely something everyone would over look. When are we going too see you teaching momma Taz to do wheelies and jumping ditches to come north that would be a great video. 😎😁🤣🤣 have an awesome awesome day buddy 🌲🪵🪓💚

@michaelwhiteoldtimer7648

2 жыл бұрын

Jay I bet you are on Momma Taz’s list again 😂

@jaythe306snowmexican

2 жыл бұрын

@@michaelwhiteoldtimer7648 😁🤣🤣🤣🤣🤣

@tazman-kennyfuller

2 жыл бұрын

Thank you Jay. This thing is crazy. And I love it. Love ya man. 🌲❤🌲👊🪓

I'm having that exact same problem with a NeoTec 372xp copy. It runs like a bear and then after a little while it'll just start to bog. It's tuned right and it runs great but after a few cuts it starts to do that. I'm gonna check that vent hose and also the outlet where it comes out of the case. Maybe there's a plastic casting hole that has some flash in it or something. It feels like it's starving for gas when it's bogging like that.

And the rips off of cedar (the long rip noodles or ribbons) is what I use to start fires. It’s like gasoline man.

Do you think maybe that when you had the hose hooked up to the front hole maybe it stretched too far and made the hose tighter and caused it to pinch down or maybe the other nipple could have caused the positioning of the hose to rub against the throttle butterfly perhaps why it was intermittent?

Excellent video could you do one of the throttle spring where it goes and how to assemble it , cheers .

Does anyone know if it is for the winter kit you can get for 372 xp?

I like that xp sticker on your air filter cover looks slick. Did that come only on xpws?

@tazman-kennyfuller

2 жыл бұрын

Thanks Luke. I put the decal there. This decal is for earlier models of husky. Can be found on eBay and other places. 🌲❤🌲👊🪓

Is that XPW the 75cc 372? I don’t see many of them, I have one but it’s not a full wrap, and honestly it’s either worn out or I have a hotter 365 than stock but my 365 to crank, dang, it’s got plenty compression I’ll say that and the 372xpw a child could pull. It seems to run great, but the 365 just seems hotter for some reason.

Well this one sure has me scratching my head🤔 Have you tried switching the vent back to where it originally was to see if it acts up again? Seems strange that it ran good for such a long time like that🤷‍♂️

@tazman-kennyfuller

2 жыл бұрын

I think that the vent plugged and I changed it and I think I put the hose on the wrong outlet when I put it back together. It acted the same as being plugged. Yes i have since tried the other fitting and it goes right back to not running good. Thank you Andrew. 🌲❤🌲👊🪓

Very interesting. Wonder why there are 2 Connections from the factory on those saws. Be safe and be careful.

@tazman-kennyfuller

2 жыл бұрын

Thank you Kevin. Yeah it's kinda weird. Not sure why there are two. Only thing I can think is so you have somewhere to plug the fuel line when taking off the carburetor. Just a guess. Love ya brother. 🌲❤🌲👊🪓

@seangilbert3542

8 ай бұрын

​@tazman-kennyfuller is it for a winter kit ? Idk. Never had a winter kit for mine.

It is generally considered bad practice to cut with the nose of the bar. especially in that particular cross cut. If you set the dogs into the log not only will you have more power with a lever action into the wood, it will be much safer.

@tazman-kennyfuller

Жыл бұрын

Thank you for your support Dave. I cut alot with the end of the bar. Sharp Chain allows it. Stand up and Buck. 🌲❤️🌲👊🪓

My g372xp is dying in the cut. I noticed that when I was carrying it with it running it would speed up at idle before it acted up i the cut. After contemplation I arrived at well maybe it is a fuel vent issue. So i watched this video. Lol, my fuel hose comes up through that hole and I don't have anything coming up through the hole your fuel hose comes through.

@tazman-kennyfuller

Жыл бұрын

Hello and welcome Kraftzion. Thank you for your support. Your saw may have the different style vent and not have that hose. Sounds like it is leaning out if it idled up. Could be a goofy carb or an air leak as well. Not sure what carb you have but some of the after market carbs can be finicky and constantly need tuned. Hope this helps. 🌲❤️🌲👊🪓

@kraftzion

Жыл бұрын

@@tazman-kennyfuller Upon further research it has a supposedly porous brass plug pressed into the side of the gas tank. I removed the tank last night and drilled a tiny hole through the center of the plug with a wire bit. I made a a few long rip cuts with it today without an issue so hopefully that solved my problem.

@tazman-kennyfuller

Жыл бұрын

@@kraftzion awesome buddy. Thank you for the info. 🌲❤️🌲👊🪓

👍thanks. was pulling my hair the f#ck out.

@tazman-kennyfuller

Жыл бұрын

Hello and welcome Jetro. Thank you for your support. Hope it helps your situation. 🌲❤️🌲👊🪓

Taz man is the homie with the bar on it in the top left corner of the screen a 361?

@tazman-kennyfuller

2 жыл бұрын

Hey JC. No the Homie hangin up is one of those little super 2 type saws. 🌲❤🌲👊🪓

@j.c.lawntreesnow6272

2 жыл бұрын

Dont know what I was thinking the 361 is a jonsered not a home night peace