The packing piece you used behind the spare wheel, I used them on the body posts to lift the body slightly.
@kennywright1522 жыл бұрын
Very informative great video. 👍💪
@BigfootRCrcoverlanddave26462 жыл бұрын
🤘🤠🇬🇧nice and informative Mark have subscribed 👍🏻nice little video great FTX crawler 🏴RC Overland Dave🤠
@bobble1476 Жыл бұрын
dude i l;ove the dog
@markwrightrcs8456
Жыл бұрын
Yeah he loves the garage 👍🏻
@carlbModels Жыл бұрын
Nice practical stuff here, good to know 👍🍺🇬🇧
@markwrightrcs8456
Жыл бұрын
New video on the Kanyon will be up one e I’ve finished the editing 👌🏻
@MadZprod23 Жыл бұрын
Nice video bro 👌
@markvince95922 жыл бұрын
Yes to this.
@Rc_Alex_76 Жыл бұрын
Very good bit of craft there freind looks tougher and BTW I subbed
@markwrightrcs8456
Жыл бұрын
Thanks mate it’s had a lot more done since then and once I get time I will put that video up 👍🏻
@maxbuckley97622 жыл бұрын
Hey Mark I've just picked myself one of these up from amazon as the current model I have at the moment just wasn't big enough for the trails that I walk I've grabbed some Ali for the chassis too but I just wondered if after owning yours for a few mouths now would you say there to be anything else that needs attention or just add the Ali and run it ?
@markwrightrcs8456
2 жыл бұрын
Hi max, so after a good few runs I found the car to be a little slow compared to others and is not waterproof or very splash proof🤦♂️🤣 So since I shot this video I’ve added hobbywing 1080 and a new motor and a waterproof receiver book. It’s now even better than I hoped for. And thanks for the subscribe 🤟🏼
@X_BIGELL_X2 ай бұрын
great video, ive noticed you dont have original roof rack & looks 3d printed, witch one have you got?
@markwrightrcs8456
2 ай бұрын
No it was the original one mate and thank you
@SimonWebbRCandModellingChannel2 жыл бұрын
Hi Mark. Were your diffs locked from new?....Mine are. How do I unlock them?
@markwrightrcs8456
2 жыл бұрын
Hi Simon, my diffs are locked and not really much of a problem how ever I will have a look and post a video on how to unlock.
@SimonWebbRCandModellingChannel
2 жыл бұрын
@@markwrightrcs8456 Thanks very much Mark.
@markwrightrcs8456
2 жыл бұрын
@@SimonWebbRCandModellingChannel hey so is there a reason you don’t want the diffs locked? If you unlock them you won’t get power to all 4 wheels!
@SimonWebbRCandModellingChannel
2 жыл бұрын
@@markwrightrcs8456 If all the differentials are free to rotate it will simply work the same as my other 3 diff trucks! I occasionally use them on tarmac. Not sure what you mean about not having 4wd with working differentials Mark.
@markwrightrcs8456
2 жыл бұрын
@@SimonWebbRCandModellingChannel so I’ve not had a chance to look my self but there will probably be a diff block that you can remove and up grade so you could probably switch on or off as you would require them. It’s a fantastic truck but definitely strengthen the back wheel I used the tie clips that came with it, but you can see all the mods on line then it’s just fun fun fun.
@charleslinton6395 Жыл бұрын
Hi what battery did you get?
@markwrightrcs8456
Жыл бұрын
I got rid off the electrics that come with it and installed hobbywing 1080 and used a 2s lipo, became an amazing truck
@markwrightrcs8456
Жыл бұрын
I use gen’s 2s batteries with XT90 connectors on it
Пікірлер: 25
The packing piece you used behind the spare wheel, I used them on the body posts to lift the body slightly.
Very informative great video. 👍💪
🤘🤠🇬🇧nice and informative Mark have subscribed 👍🏻nice little video great FTX crawler 🏴RC Overland Dave🤠
dude i l;ove the dog
@markwrightrcs8456
Жыл бұрын
Yeah he loves the garage 👍🏻
Nice practical stuff here, good to know 👍🍺🇬🇧
@markwrightrcs8456
Жыл бұрын
New video on the Kanyon will be up one e I’ve finished the editing 👌🏻
Nice video bro 👌
Yes to this.
Very good bit of craft there freind looks tougher and BTW I subbed
@markwrightrcs8456
Жыл бұрын
Thanks mate it’s had a lot more done since then and once I get time I will put that video up 👍🏻
Hey Mark I've just picked myself one of these up from amazon as the current model I have at the moment just wasn't big enough for the trails that I walk I've grabbed some Ali for the chassis too but I just wondered if after owning yours for a few mouths now would you say there to be anything else that needs attention or just add the Ali and run it ?
@markwrightrcs8456
2 жыл бұрын
Hi max, so after a good few runs I found the car to be a little slow compared to others and is not waterproof or very splash proof🤦♂️🤣 So since I shot this video I’ve added hobbywing 1080 and a new motor and a waterproof receiver book. It’s now even better than I hoped for. And thanks for the subscribe 🤟🏼
great video, ive noticed you dont have original roof rack & looks 3d printed, witch one have you got?
@markwrightrcs8456
2 ай бұрын
No it was the original one mate and thank you
Hi Mark. Were your diffs locked from new?....Mine are. How do I unlock them?
@markwrightrcs8456
2 жыл бұрын
Hi Simon, my diffs are locked and not really much of a problem how ever I will have a look and post a video on how to unlock.
@SimonWebbRCandModellingChannel
2 жыл бұрын
@@markwrightrcs8456 Thanks very much Mark.
@markwrightrcs8456
2 жыл бұрын
@@SimonWebbRCandModellingChannel hey so is there a reason you don’t want the diffs locked? If you unlock them you won’t get power to all 4 wheels!
@SimonWebbRCandModellingChannel
2 жыл бұрын
@@markwrightrcs8456 If all the differentials are free to rotate it will simply work the same as my other 3 diff trucks! I occasionally use them on tarmac. Not sure what you mean about not having 4wd with working differentials Mark.
@markwrightrcs8456
2 жыл бұрын
@@SimonWebbRCandModellingChannel so I’ve not had a chance to look my self but there will probably be a diff block that you can remove and up grade so you could probably switch on or off as you would require them. It’s a fantastic truck but definitely strengthen the back wheel I used the tie clips that came with it, but you can see all the mods on line then it’s just fun fun fun.
Hi what battery did you get?
@markwrightrcs8456
Жыл бұрын
I got rid off the electrics that come with it and installed hobbywing 1080 and used a 2s lipo, became an amazing truck
@markwrightrcs8456
Жыл бұрын
I use gen’s 2s batteries with XT90 connectors on it