FTC 12448 M.A.R.S. | Competitive Concept | Freight Frenzy 2021 - 2022
Ғылым және технология
We would like to present our competitive concept prototype that we made for this years challenge, Freight Frenzy. Goodluck to all teams!
We would like to present our competitive concept prototype that we made for this years challenge, Freight Frenzy. Goodluck to all teams!
Пікірлер: 17
Fill out this google form if you would like to request access to the building guide for our robot! forms.gle/nN3nqLmvSASG34CH8
@kaewklasroykabkaew6255
2 жыл бұрын
i request it already
Nice background song. It reminds me of ferris bulers day off and put a smile on my face. Good luck.
lauching moment
Great robot. The gears to connect the servo to the shaft for the intake, are you able to share information on gears did you use? Thank you
Hi! I was wondering if you are designing a separate system to be able to pick up the team shipping element?
So how did you attach the shaft on your intake to the blue roller on your intake? Is that a bunch of tape, or is it pvc?
@ftcteamm.a.r.s.9462
2 жыл бұрын
It’s a custom 3d printed cylinder with a 5mm hex shaft bore. We ran the hex shaft all the way through the cylinder with reinforcements on each end.
Is this your full robot or just a concept that you think will be competitive as a general design, that you are going to build upon throughout the season?
@ftcteamm.a.r.s.9462
2 жыл бұрын
So this is just a competitive concept that we made for the benefit of beginner teams who need help forming some ideas and designs. We have transitioned into a whole new robot to compete with this season, but this robot will remain intact and open to the public
Also, the black surgical tubes you have for the intake, are you able to point us where you got that from? Thank you
@ftcteamm.a.r.s.9462
2 жыл бұрын
Hello, we used black latex rubber tubing ordered online from Amazon. For our intake we used a REV 30 tooth and REV 60 tooth gear and put them to have a 1:2 gear ratio. If you are interested, we are offering a building guide and public CAD file. You can request access for this by filling out this Google Form: forms.gle/uaHAf9wRrHeSUB7h6 Thank you, email us at 12448mars@gmail.com if you have any questions or need additional support.
Yes
2nd comment let’s gooo
Hello, I'm Yewon Ahn from Yeongju Girls' High School who participated in this competition in Korea and is making robots. Can you please check the form I filled out?
Hi
No