If you want to replace with all OEM parts here they are: Front Diff Cover with Bushing: 41108-60011 diff stopper: 41653-60010 Retainer: 41654-60010 side support arm with bushing: 52380-60040 front support arm with bushing: 52380-60030 arm stopper: 41653-60020

@martinezmb3814

2 жыл бұрын

brother were can I buy tha parts ??

@thomashaas3116

Жыл бұрын

Thanks so much for this summary of parts, Aaron. Really helpful🤞Just ordered them. Question: how many of the metal stoppers will I need to do the job? In the video it looks like there are multiple ones - no?

@luisvallejos2320

Жыл бұрын

@@thomashaas3116 did you get a number? I have the same question.

@isaacsharp1170

4 күн бұрын

Retainer 41654-60010 has been superseded by 41654-04020 Stopper, Differential Mount, Lower.

thank you my friend, 2003 land cruiser owner from NY

Great vid. With the thunk/thud we hear in our 100s, most people talk about greasing the driveshaft on the forums. I can literally feel the thud near my feet and never thought to look at replacing those bushings. Going to research this a little more, but appreciate the video to get me looking into a new solution. (Also have a YotaMD key fob and dig it)

Just did this today. I only replaced the front 2 bushings. Thank you much for the video, really helped out. Was fun to use the air hammer!

Exactly the information I need right now! Thank you.

Great job amigo, very clear and well done, keep up the great work.

Best video I've seen on this work.

Those key fob shells are awesome, just purchased one. Might come back for a purple one for the wife later.

This is the greatest!

I know the arms are expensive but it looks like it’s worth buying them

great vid..maybe should included the price's.. and also price difference between buying the bushes compared to the complete arm/part Toyota recommended.

Did you feel much of a difference after the new bushings? Or was it more just for preventative maintenance?

Hey, how did you go? Did it resolve your problem? I noticed a similar movement on my HDJ100, thought the rubber was torn as I could see right through it. Ordered and replaced the whole arm. Unfortunately, what I didn't know is that the bushing just like all the other front diff support bushings have holes in them to allow for movement. Put the new one in and it was flexing exactly the same as the old one. Complete waste of money and time. There are several videos here of guys replacing these bushes (one or all) at great effort and cost and they all seem to have the same amount of flex in them both before and after replacement. One possible exception appears to be the front support bushing. This is supposed to suffer most wear. But still haven't seen any of them torn. May just du with just the upper cushion replacement. I'm still looking for my clunk noise. Already replaced the side support arm, all upper / lower arm bushings, ball joints, shocks & CV's. It's driving me crazy!

Front diff cover (with new bushing preinstalled) part number: Axle Cover - Toyota (41108-60011)

Do you think a Milwaukee multi tool / oscillating tool would work instead of the chisel?

my clunck sounds like it's coming from the rear, not the front of the truck. Is this the fix for that? For context, I bought my 02 with 40k on it. It had that clunck sound the day I got it. It now has 330k miles, same clunck.

Woah thank you... It seems like the parts are not available anymore. Any idea where to look?

@WiliamShattner

3 жыл бұрын

I found on eBay. Shipped surprisingly quick from the Middle East.

Chasing down my clunk as well. Driveshaft is well maintained so this is my next check, thanks for the video. To diagnose, easiest way is to put the pry bar on like you did and check for play? Wheels on the ground?

@Yotamddotcom

4 жыл бұрын

I'd recommend setting a camera down under the car and watch for the front mount to move during shifting. Pry bar works, but camera might be better and more convenient.

@MikeDigMT

4 жыл бұрын

@@Yotamddotcom Thanks for the reply, last time I did that I saw my CVs turning a bit and that made me sad, may need to think about those as well... Will have to drop the skid and check on diff bushing as well.

@MikeDigMT

4 жыл бұрын

Pretty fun trick to help diagnose this before tearing apart. I managed to put a thick rubber gasket between the front diff bushing and mount. It's a band-aid for sure but it allowed me to realized that the front diff bushing is the main problem as the clunk went away. Thanks for the video. >> I know this is tough but If you had to go at it again, would you just replace the front diff housing/arm or fight the old bushing out? If replacing the arm, would you agree that it is Toyota 52380-60030

@Yotamddotcom

4 жыл бұрын

@@MikeDigMT I actually went through this again with my 06LX that I picked up early this year. I changed out the front arm, the front lower bushing and the pucks in front and in back. I left the rear main bushing because my 99 one was so nice. The arm part number you mention is the rear arm - I'd leave that alone. The side arm that's commonly bad is 52380-60040. The second time around this job was cake. Very fast. Once you're comfortable with the air hammer you can cruise through removal and buying the arm from Toyota saves you a solid hour of screwing around with the bushing and you just unbolt the old and bolt in the new.

@MikeDigMT

4 жыл бұрын

@@Yotamddotcom You the man, thanks. I am just going to chase the forward most bushing replace, the mount that seems to be apart of the front diff housing. Looks like when you show the parts diagram from Toyota I need the top 2 part numbers, but is the third part number on that list necessary? Tried to message you on mud but apparently I'm techno-tarted and can't figure it out

hi, where to order this front differential bushing?

I’m starting to feel a bit of vibration when I’m in Drive and foot on brake. Trying to figure out what bushing needs to be replaced

@Yotamddotcom

2 жыл бұрын

That arm bushing would be the first I inspect.

@DuanDao

2 жыл бұрын

@@Yotamddotcom thanks I’ll have a look tomorrow when i do my seat bar bushing refresh

So the front bushing, you don't think just using the big washer and bolt to press it in will work?

@Yotamddotcom

3 жыл бұрын

No, I don't think so. I think you'd distort the washer. I have another video, Chapter 2 of the Cypress Build, where I show the action of pressing that bushing in with an impact. It's enough force that I think a proper press die is needed instead of the washer. You'd also risk some damage to the nut or bolt threads. Grab the C clamp tool off Amazon and make it easy/easier on yourself.

How many miles would you expect these bushes to last? I'm looking at buying a LC with 190 km and these are well worn

@Yotamddotcom

4 жыл бұрын

I can't say for sure, but I wouldn't be surprised if they were worn at that mileage.

what would be the different arm part numbers if you don't have air chisel or an extra hour of cursing to spare?

@syedhaque4049

4 жыл бұрын

Good question. I'm working with a mechanic to see if we can do all of this. Great video btw.

What were the symptoms of bad bushings?

@Yotamddotcom

5 жыл бұрын

I had a clunk or thud when changing from drive to reverse and sometimes when braking and accelerating. Now the thud while braking and accelerating is gone and d to r is reduced.

@tacte-cool1331

5 жыл бұрын

Started this job tonight. Using a cordless Dewalt hammer drill on chisel mode. First bush in the removable arm came out in about 2 minutes. Going to try the bush in the diff cover tomorrow. Hopefully that one is just as easy.

@justingoss3475

3 жыл бұрын

@@tacte-cool1331 Which removable arm are you referring to that came out in 2 minutes? Also, how did the others do with the Dewalt hammer set on chisel mode?