Do you have any idea how hard it is to try and watch allllll of your videos???? I'm trying.....really really hard. I've learned more in two weeks than ever thought possible.

@PowerStrokeTechTalkwARod

Жыл бұрын

🤣🤣🤣🤣🤌🤌🤌😎😎😎😎💯💯💯💯

@jasongriffin1127

Жыл бұрын

He is a phenomenon. I live in NC and am contemplating sending him my truck.

@rayc5255

10 ай бұрын

Had a nightmare going on with local Dealer on West Coast and was starting to seriously consider shipping my 2016 Lariat D to him. Have also learned more than thought possible here, hat tip A Rod

Hey kidderz! I am 66 and just changed my 2000 superduty f250 front diff with 80w90 gear/diff oil conventional. I have cursed the stubborn 4x4 turning. I just drove the field round about the brush pile! Wow! Sharp turns with no hang-ups!!!!!!! Never knew the heavy old muddy oil would restrict turning. I also dumped and flushed grey metal sparkles from the transfer case! I added proper atf.

ARod is the only technician who cares more about your truck than you do!

@PowerStrokeTechTalkwARod

2 жыл бұрын

Si!

@3374jj

2 жыл бұрын

So true big Mike

@LunaDaSavage

Жыл бұрын

The only? I know many bud

@PowerStrokeTechTalkwARod

Жыл бұрын

The only, when they come across the usa to have me work on their truck, yes

I have worked in the auto industry for 36 years. The reason the manufacture use sealant is because it is more economical and applied using a robot. I use a gasket when changing fluids in my F250 diffs. Never had a leak.

@ramirogallo4303

4 күн бұрын

Which gasket do you use?

Use a putty knife, not a screwdriver to open it up, you will bend your cover or gouge your housing. And use the correct silicone made for gear oil and friction modifiers. Permatex makes it. Make sure you make circles around the bolt holes and only hand tighten the bolts and let cure for about an hour, then tighten to specs. If not you will squeeze out all the gasket maker too thin and might leak? You should see the sealant come out all the way around the outside of the cover if you do it right. Once it comes out after hand tightening, stop. Wait for an hour, then torque it down. Temperatures will change that time if colder?

I like to use a vacuum pump.....No need to remove cover. Awesome Job ARod.

@lalo1424

Жыл бұрын

❤😂

Always remove the fill plug on a transfer case or differential before draining fluid. If the fill plug is frozen or stripped, you can order a new plug or cover and do the job later. If you drain the fluid first and you destroy that plug getting it out, you just disabled your truck until you can get new parts.

@jeremyreagan4734

6 күн бұрын

Yep, done a rear diff change in my truck yesterday and the first thing was getting that fill plug out

Always top tier work Arod! Making it look easy peasy 💯👍🏼

Love it! I was able to drain, clean diff and cover edges. I used Master Pro GL-5 80W 90 gear oil. Waiting for the hour to be up so I can fill diff.. we’ll see 👍🏻

A old man from one of the gasket sealant companies showed me how they recommend installing their sealant and ever since then I have yet to have a leak. He said one that we all use extremely way too much. It should not squeeze out. Nor should it slide around. He showed me to use very little and then use your finger and pat it over and over spreading thinly like a gasket on the surface. You pat it with your finger so you do not have a smooth surface but lots of ridges. Do both sides the same way and by the time your done it’s thin enough it should be tacky. Install and done. No mess out the sides. No sliding around. A complete seal.

@PowerStrokeTechTalkwARod

Жыл бұрын

Gotta love thee old timers righttt🤌🫵

Thanks brother... Used 80W90 Valvoline in squeeze bottle. Front Dana 60 was simple drain and fill. In lieu of gooey gasket, I used Lubelocker's reusable gasket - 4 weeks and no leaks. IIRC, torque was 30-32 ft lbs.

@blakeapplewhite

Жыл бұрын

Any update on the lube locker? I’m about to do my front and rear diff

@sheepdog3828

3 ай бұрын

Update on lube locker? Got 2018 f250 6.2l in need of fresh fluids.

Absolutely love this channel. Helps me out big time

Great work as always man!

Another great video, thanks ARod , l will be doing mine soon.

I just changed my fluid. The diff cover bolts were stupid tight. I needed an 18” breaker bar to get them off (from the factory). They also had blue loctite on them. 85,000 miles and the oil looked good.

Thank you for editing out air gun!

On your A game as always brother. These are so often overlooked

Thankyou for your dedication in taking the time to make these videos to help us Powerstroke owners out with our maintenance. I am going to be doing the front and rear diff fluid change on my 16 F250 here soon. Front diff started seeping a bit and at 70k, its about that time for a fluid change any ways.

@michaelkrause392

2 жыл бұрын

Appreciate the time & effort in making these videos. I’ll be doing the front/rear along with my transmission filter/fluid change when I get back from out of town….long overdue at 105k. Will be using only FoMoCo fluids.

@PowerStrokeTechTalkwARod

2 жыл бұрын

Wish others around me felt the same. Good luck pal

Yes!!! Thanks Arod 😏 Diggin that Fox Stabalizer BTW..

@PowerStrokeTechTalkwARod

2 жыл бұрын

Woooowooo

Excellent video. Subscribed!

@PowerStrokeTechTalkwARod

Жыл бұрын

Hey thanks pal, welcome. Dont 4get to check out our playlists

I pumped green fluid out of a front differential on a 2003 F250 6.0 Powerstroke super duty king ranch today. I don't know what it was but the only I can find online that is green is Shell Spirax sae 30. I put the limited slip differential additive and 80w90 full synthetic gear oil when I filled the front differential. My video is called "2003 Ford F-250 6.0 liter King Ranch 4x4 front and rear differential drain and fill". That Green sludge from the front differential was ridiculously hard to pump out it was like sae 200 weight.

Looks just about like doing the Dana 50 on my 2000 F350. Instead of silicone I used a Lubelocker gasket.

Good job

Quietest air impact I ever heard! 😃

@PowerStrokeTechTalkwARod

2 жыл бұрын

Ghosted lol

Never liked silicon gaskets on differentials, Lube Locker gaskets are faster.

Another Super job as usual

@PowerStrokeTechTalkwARod

2 жыл бұрын

🙏

@charlesklippel92

2 жыл бұрын

I wish all Ford mechanics did stuff in detail like you do but when you live in Florida they cut corners and they're giving Ford a bad name but you put everything out in the open you're a good human being you're smart and you do top-notch work thank you for putting out good videos very good content

@PowerStrokeTechTalkwARod

2 жыл бұрын

Appreciate chu

Legendary Dana 60 Front axle. Shame they used the dana 50 in the Excursions and 99-01 250/350.

Do you recommend putting additive inside the front diff ?

My old mechanic used to use an old 10 pound propane tank ( the ones used for BBQ) he actually wielded a threaded nut and a threaded male end of a air quick chuck on the base and some hose with an 90 degree tube

Its that a dependent front axle?

Man, we need an Arod in all of our cities for our Ford trucks! Hey from Kingston, Ontario Canada! Great videos!

@PowerStrokeTechTalkwARod

2 жыл бұрын

Hey!!!!

I heard Schaffer oil is good for differentials

Also, I saw you used Motorcraft 75w140 on the rear fluid change, but the front was 80w90. Is that the recommended fluids to use? Thanks for all the great videos and information. 👌🇺🇸

@PowerStrokeTechTalkwARod

Жыл бұрын

Lololol yes sir. I dont just pick a fluid & use it🤣

That’s a very quite gun lol

How many Quarts went in front axle?

Thanks for the video, can I use synthetic 80W-90 gear oil on front differential of 2022 super duty? Please advise.

@PowerStrokeTechTalkwARod

2 жыл бұрын

Yes...no tremor tho

Hey Arod, can you use the TA-357 for the differentials? Or does it have to be the TA-31? And also do you put any thread sealer on the fill hole bolt? Thanks

@PowerStrokeTechTalkwARod

Жыл бұрын

Yes u can use ta357 & u cld put a lil bit yes

Are all years 80/90? Or do different years take a different weight? I have a 14 that’s why I ask.

Question… Do you only recommend the Motorcraft silicone sealant for the front differential, or what would you use as a replacement or secondary sealant? (i.e. Permatex Blue or red high temp silicone sealant?)

@PowerStrokeTechTalkwARod

Жыл бұрын

The silicone u see me use, it what u r to use.

Arod - what are your thoughts on using 75w90 vs 80w90 in order to go full synthetic? Amsoil offers a syn 80w-90 but it’s tough to get.

@PowerStrokeTechTalkwARod

Жыл бұрын

I wldnt see an issue

I bought a 2019 certified pre owned ford ranger, 31k miles a week ago and baby that truck had me under it two days straight…. CPO cars are not what they used to be Rear and front diff fluid 80w90 which had a drain bolt.. thank the Lord Changed fluid in trans case Changed oil Air and cabin filter (filthy) Spark plugs (fouled) Flush brake fluid Changed Front brake pads Checked back rear brakes and the dealer slapped new pads on backwards and rotors were shot.. that was when I had had enough because there was also fiberglass coming out the muffler … WTH 🤦🏾‍♀️ Dropped it back off at dealer and told the to fix it. One would ask why didn’t you check before…certified pre-owned. I’ve bought in the past and no issues. Not anymore

I wish my 2016 F150 front diff was this easy

Can anyone recommend the Silicone bead, size on a super duty front end differential like this one I know it’s not rocket science, but would like to know considering it’s my first time doing a cover

👍

The Ford Manual F 350 6.7 DRW Dana 80 Recommends an additive to the diff fluid. Your thoughts? I didn’t see or hear you mention using any additives. Thanks

@PowerStrokeTechTalkwARod

2 жыл бұрын

If u have ELD no additive.....

Cuanto se cobra por un trabajo de estos?

What kind of sealant did you use on the fill plug? TIA!

@PowerStrokeTechTalkwARod

Жыл бұрын

PTFE

Hello! Really enjoy your in depth instruction on service on the trucks. Question? What is the Motorcraft specification number on that silicone sealant please? Thanks again! 🇺🇸

@PowerStrokeTechTalkwARod

2 жыл бұрын

Number, like the part number?

@wtfd95

2 жыл бұрын

@@PowerStrokeTechTalkwARod Yes please? Motorcraft. Tried to find a Lube Locker Gasket for front and rear differential and couldn’t find it with a search warrant. 😂

@PowerStrokeTechTalkwARod

2 жыл бұрын

Ta-29

@wtfd95

2 жыл бұрын

@@PowerStrokeTechTalkwARod Thanks! You mentioned TA-31 in your video earlier for the front and rear differential sealant. Reason for change? You’re the best!

@PowerStrokeTechTalkwARod

2 жыл бұрын

Ones a squeeze tube

Hey Arod great content as usual. Could use your opinion on what to use for 5R110 fluid?

@PowerStrokeTechTalkwARod

2 жыл бұрын

What u mean

Isn't a limited slip additive required? Or is that only with synthetic oils?

@PowerStrokeTechTalkwARod

5 ай бұрын

Not if it has ELD electronic locking diff

Quick question what is the difference between using the silicon like you are using and an already prepared maybe silicon or rubber gasket such as a fel-pro gasket for the front and rear diff?

@PowerStrokeTechTalkwARod

3 ай бұрын

I feel the silicone gets in all of the grooves and imperfections of the metals vs the gaskets such as you mentioned. I just do not like doing these twice + on top of how expensive the fluid is...

@brianandreasen2200

3 ай бұрын

@@PowerStrokeTechTalkwARod I appreciate the heads up bought my 6.0 last year and using it for towing a fifth wheel for camping and traveling. I think I'll take the silicon route and of course ensure it's motorcraft :). I believe I have to do both front and rear procedure looks the same.

How did you rinse the differential gears out? - Did you use gasoline for that?

@PowerStrokeTechTalkwARod

Жыл бұрын

Rinse.....really

Bottle says Rear axle lubricant 80w-90, yet you used for front axle. Ok to use it on both front and back?

@PowerStrokeTechTalkwARod

10 ай бұрын

Yes my friend..

Do you recommend an age/milage to do diff fluid changes at?

@PowerStrokeTechTalkwARod

2 жыл бұрын

Yes 45 50k. Watch our white board maint video

@triceT6R

2 жыл бұрын

@@PowerStrokeTechTalkwARod Thanks

@triceT6R

2 жыл бұрын

Great videos bud. Appreciate you taking the effort to make them.

Hey brother quick question. Did you use the Ta-31 on the plug too or something else?

@PowerStrokeTechTalkwARod

9 ай бұрын

Ptfe

@thecracken9855

9 ай бұрын

@@PowerStrokeTechTalkwARod 🫡

Are these Super Duty's running strait Dana 60 reverse rotation or Dana Super 60? I have a 2013 and believe it's the Dana 60 but am having trouble confirming which it is. Also any thoughts or experience with the Lube Locker gaskets?

@-R_H

Жыл бұрын

I know this is 8 months ago but I just used a Lube Locker gasket on the rear and it was great. No issues

@Randy_Savage_ohyeah

Жыл бұрын

@@-R_H thanks much....I figured it out. Used lube lockers on front and rear diffs.

@iwillletyouguess

Жыл бұрын

What’s ur tag#?

@Randy_Savage_ohyeah

Жыл бұрын

@@iwillletyouguess I figured it out...was the Super 60. I changed out the fluids and ised the lube lockers front and rear, no issues at all. Hardest part was cleaning the old sealant off.

ARod, Do you remember if this Dana 60 have those stupid pockets in the bottom of the pig, like the rear Sterling 10.5"? Or was it designed with common sense and can fully drain out? Thanks for all your videos!

@PowerStrokeTechTalkwARod

9 ай бұрын

Nope has a lil nook n cranny

Like the rear diff banks cover. Does anyone make one for the front? Seems like a lost opportunity?

@rockie307

8 ай бұрын

Front diff only spins in 4x4 overheating is not a problem with front diff cause nobody tows heavy for hours in 4x4. Also banks is weak design for front diff being exposed to road debrit or off road rocks logs etc.

@retiredafce3373

3 ай бұрын

I too like the Banks rear cover!

Hi Do you need some great lighting upgrade for your trucks to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

Hi there, Here's a question - I thought Ford switched to 75W140 for all diffs 80W90 seems old school or am I wrong here...?

@PowerStrokeTechTalkwARod

Жыл бұрын

80 90 is for the front

How many quarts did it take? and also for the front diff how do you tell what weight to use? Would my 2016 F250 take 80 W90? thanks in advanced.

@PowerStrokeTechTalkwARod

2 жыл бұрын

I am 100% certain your truck came with an owners manual. All of that info can be found in the capacities section of your manual.

Is the fluid the same for a 21 I would presume?

@PowerStrokeTechTalkwARod

Жыл бұрын

Yea

Love you videos I got 2016 f 250 going to do transmission fluid and filter thinking about put BD diesel transmission silanoid line pressure what do you think about it is it worth it

@PowerStrokeTechTalkwARod

2 жыл бұрын

I know nuthin bout that sry pal

@rickketchumn4458

2 жыл бұрын

Need to check in on it be good video maybe educate us on it thanks

@PowerStrokeTechTalkwARod

2 жыл бұрын

Good idea

Arod have you done a transmission change for a 2019 without the drain plug?

@PowerStrokeTechTalkwARod

2 жыл бұрын

Just did 1 friday

@mark_Hershey

2 жыл бұрын

@@PowerStrokeTechTalkwARod we getting a vid from it?

@PowerStrokeTechTalkwARod

2 жыл бұрын

Naw i had already did one with the drain plug. Its virtually the same thing....

@mark_Hershey

2 жыл бұрын

@@PowerStrokeTechTalkwARod did you use the drain plug to drain it? Cause thats cheating.. lol. I’ll look up you vid.

@PowerStrokeTechTalkwARod

2 жыл бұрын

Yeah that 1 had a drain plug but the ones that don't you just start cracking the bolt's loose and let it drain out the back it's not that big of a deal at all

Does Banks have a front differential cover?

@PowerStrokeTechTalkwARod

Жыл бұрын

No

@jasongriffin1127

Жыл бұрын

@@PowerStrokeTechTalkwARodwhat size Dana is that? Looks 1/2 Ton….

@PowerStrokeTechTalkwARod

Жыл бұрын

I think its a Dana 60. Id have to chk

Why ford don't make a drain plug?

@PowerStrokeTechTalkwARod

22 күн бұрын

They do, just not for the 10.5 sterling

Could it be drained through the plug hole? Or are you doing that so any metal shavings that may be there are removed in their entirety?

@PowerStrokeTechTalkwARod

2 жыл бұрын

E, there is no drain hole..

@nbco55

2 жыл бұрын

Fill hole, using a vacuum draw and semi-rigid extension hose to get to the bottom of the housing.

@robspear6004

2 жыл бұрын

@@PowerStrokeTechTalkwARod I've used an evacuation set up to suck out the oil through the fill hole. Not much room to get the hose past the ring gear, but with a little finagling . . .

@PowerStrokeTechTalkwARod

2 жыл бұрын

I suppose so

@nbco55

2 жыл бұрын

@@PowerStrokeTechTalkwARod I mainly ask because I used that method to change the transmission fluid in my John Deere's shitty k46 transmission and replaced it with amsoil. And it was like a new transmission afterwards. So I guess it really comes down to getting any metal shavings that may be contaminating the fluid or would a 95% evacuation be even worthwhile and beneficial. Between you and my local diesel mechanic David, I respect your opinion and I also respect the fact that you have to do things according to the book even when sometimes the book is not correct. And I'm referring to your 7.3 silicone versus 6.7 silicone and the manufacturers disconnect on its intended purpose and being around diesel fuel.

Can't find your grease fitting maintenance on the superduty

@PowerStrokeTechTalkwARod

2 жыл бұрын

My thumbnail is DSTRUCKS 450 with plow in it. Its like 40 minutes

@JAG6.7

2 жыл бұрын

@@PowerStrokeTechTalkwARod Thanks ptt

@JAG6.7

2 жыл бұрын

@@PowerStrokeTechTalkwARod found it.

What’s the benefit of draining diff and replacing fluid? Is that what we feel on the steering wheel?

@PowerStrokeTechTalkwARod

2 жыл бұрын

🤯

@jlweck231978

2 жыл бұрын

The benefit is pretty much the same as changing any other fluid. The diff fluid get dirty and contaminated from the wearing of the parts inside. The fluid properties can break down over time too. So the benefit would be to help make the parts last longer. Fluid is a lot cheaper than new parts and not having to deal with a failure and all that goes with that.

i broke a bolt off :( but I'm just an idiot :)

30 foot pounds same as the rear

Axle fluid be stinkyyyy…I wanna know where to get the grape smelling kind. Heard they make axle fluid that smells like grape

@PowerStrokeTechTalkwARod

2 жыл бұрын

Whaaaaaa

@joelprellwitz7944

2 жыл бұрын

Royal purple Good stuff I use it in all my 6.7 pick em up trucks n my freightliner Remember your wallet stuff is priceeeeeyyyyyy

@natey891

2 жыл бұрын

Looks like ACDelco makes a grape scented gear oil haha

@PowerStrokeTechTalkwARod

2 жыл бұрын

Hahahahahahh

I just powdercoted my covers and you go and get that silicon goo all over it. WTH

Why don’t you say how much you used how much fluid did you use how much you to end up needing that me some pretty good advice to put on there

@PowerStrokeTechTalkwARod

Жыл бұрын

4qts guy

Just did both on my 2016 super duty at 70k miles. Only change was i used lucas oils and their pump. Sealant has to sit and cure. No joke there. - Gear oil STINKS!! Yuck.

@PowerStrokeTechTalkwARod

2 жыл бұрын

Si

Don't mute the air tool noise....gonna make people think you have 👽 tools

@PowerStrokeTechTalkwARod

2 жыл бұрын

Lmaooooo

@Garrisonrios

2 жыл бұрын

PowerStroke Tech Talk w/ARod While making my girl friend watch this on the couch with me... she express grave disappointment in there being not air tool noise lol

@PowerStrokeTechTalkwARod

2 жыл бұрын

😂😭😝😭😂😭😝🤣😝😭😂

@daddydiesel5889

2 жыл бұрын

I like uga duga too

Fun fact: the easiest way to get a divorce is to come home with used gear oil on your shirt

@PowerStrokeTechTalkwARod

2 жыл бұрын

🤣🤣🤣🤣😝😝😝😝

@davestewart9146

2 жыл бұрын

Don’t forget the anti seize to go with the gear oil lol 😂

You didnt know the torque spec? or just couldnt say in the video? WILD

@PowerStrokeTechTalkwARod

3 ай бұрын

Neither. I didn't torque because I've done this job NINE hundred times. I know when it's tight. ....it's not a lug nut.....

Wouldn’t it have been easier just to use the nipples on the bottles to fill it?

So dumb they don’t put in drain plugs

ARod I can’t thank you enough for the great instruction you provided in all your videos, thank you brother. I’m trying to knock out all of maint items off of your recommended schedule. Thank you sir

@PowerStrokeTechTalkwARod

2 жыл бұрын

💪💪💪