Prep is everything. Very happy with four-hundred grit wet/dry sandpaper and lots of water to remove old scratches, heat-stamping, and other rough spots from both plastic and diecast postwar junkers.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for the tip!

Very good work and an awesome video.

@ToyTrainTipsAndTricks

4 ай бұрын

Thank you!

That's cool! Looking forward to seeing the others completed! Keep having fun!

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks! Will do!

I'm very impressed with your work and creativity, which produces endless customized possibilities. Great job!👍

@ToyTrainTipsAndTricks

4 ай бұрын

Thank you!

@mdeange3

4 ай бұрын

Your welcome. @@ToyTrainTipsAndTricks

Good video Mike! In my opinion there's nothing wrong with taking a good condition post-war or MPC Era Lionel engine and re-doing it into something you'd like to have with something other than the generic and ubiquitous "Lionel Lines" motif. If the engine's in less than pristine exterior shape there's no sin in doing so since in this day and age the collectors aren't paying top dollar for anything in less than mint condition. I've redone several myself, two Lionel 2065 Hudsons into Jersey Central and Erie Pacifics (I replaced the four-wheel trailing truck with a two-wheel, not hard to do) and redid a 736 Berkshire into a Mikado with another truck swap, even easier. As far as smokebox painting goes I suggest Tamiya "Gun Metal" spray paint. It'll be a bit "glittery" when it goes on but when you overspray with a semi-gloss final finish the glittery effect disappears and you get a good representation of the graphite finish typically applied to steam engine smokeboxes. Worked for me! Since Testor's products seem to have disappeared around here I've been using Tamiya paints and have had very good results. As far as lettering is concerned from what I've seen yellow lettering (in various shades) was more typical on locomotives and tenders than white was, so if you're doing a fantasy paint job you're on safe ground with yellow. I wouldn't bother with white lettering unless you're modeling a railroad you know used it, for example the New York Central. So for anyone out there thinking about doing your own custom job, go for it! It's fun!

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for the tips. I have found Testors at Menards in the paint section.

@wayneantoniazzi2706

4 ай бұрын

@@ToyTrainTipsAndTricks Menards? So THAT'S where it's all going!

An idea I’ve been thinking about for lettering steam locomotives is to paint the lettering color on the model, then to make a negative of the lettering in black on clear film. A laser printer will probably give a darker, more opaque black than an inkjet. If you’re careful to make the decal fit some body lines on the model, it should be practical to completely hide the edge of the film and the thickness of the black print.

@ToyTrainTipsAndTricks

4 ай бұрын

Interesting.

Looks awesome! So far, I made my own post-war C&O Freight diesel, Western Maryland Fireball and B&O Sunburst. Currently working on a pre-war project and painting an MPC Penn Central caboose in a different roadname because I ended up with 2 of the same. Thanks for the tips! 💯

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for sharing! Any tips we should know?

I would do orange lettering on the steam engines and diesels to match your paint on the cabooses

Thanks, Mike. All good content. Any of the Tmiya paints can easily be thinned using 90% isopropyl alcohol to shoot with an airbrush.You can easily cut it to a 4 to 1 ratio or more without compromising the intensity of the pigments and make 4 or more bottles from a single bottle of Tamiya, reducing the investment costs. Tamiya acrylics blend really well with isopropyl alcohol like they are made for each other and shoot easily through an airbrush and clean up easily with just inexpensive isopropyl alcohol. The Tamiya acrylics thinned with isopropyl will dry fast and permanently and will not bleed when dry, not requiring a sealer. Just don't use any isopropyl over the dried coat as it will cut through it and wreck the paint job. Other water-based acrylics like Vallejo or craft paint can easily be applied over it for layering and weathering effects. Just be sure to use Vallejo's thinner for thinng as it doesn't thin well with isopropyl or water. This technique gives one the ability to apply other water-based acrylic layers without compromising the Tamiya base coat. I saw a video recently about a professional modeler recommending using craft paint thinned with automotive glass cleaner and distilled water to shoot with an airbrush having excellent results without clumping, using it with common craft paints such as Apple Barrel found at Wal-Mart, and Folkart, Americana Art-Deco, and Anita's sold at Hobby Lobby or Michael's. I don't recall the exact ratios, but he did say the Anita's required almost double the amount of thinner as he said it was a much denser pigments than the others. The Tamiya and Vallejo acrylics are superior colorfast pigments as compared to the craft paint acrylics and will be resistant to fading over time, and you'll likely have better results with one coat applications. FYI: I recently painted and weathered a couple of plastic brick buildings where I needed to seal the craft painted brick walls so I could fill the brick joints with spackle without paint bleeding into the motor joints and because I already had a can I used the large rattle can of the Rustoleum Matte finish and could still detect a slight gloss sheen. I got a small can of the Testors dullcote at Hobby Lobby for $8.49, and it does dry to a complete dead matte finish without a trace, and it's made by Rustoleum as well. Go figure. It's interesting to note I had a really old can of this leftover from the 90's that still sprayed down really well which influenced my decision to use the Testors dullcote instead of the Rustoleum Matte finish and it had a 89 cent sticker price on the can. It's hard to imagine a 1000% price increase in such a short amount of time. When you're in you 70's, for me, the 90s seem like just the other day.

@ToyTrainTipsAndTricks

4 ай бұрын

Lots of good points. Regarding the $.89 Dullcoat, that must be a REALLY old can because I had a train shop for a short time in the late 1990s and we were selling Dullcoat for $1.75 back then.

@DRCRailroard

4 ай бұрын

​@@ToyTrainTipsAndTricksYou're probably right. It was likely from the late 80s early 90's as that is about the last time I recall building a model requiring a dullcote finish.

I used to restore blow mold yard ornaments and used Citristrip paint remover to strip the old paint with no plastic damage. I haven't tried it on plastic trains yet.

@ToyTrainTipsAndTricks

4 ай бұрын

A good tip!

I'd say that without the silver it kinda looks like Halloween. Cheers from eastern TN

@ToyTrainTipsAndTricks

4 ай бұрын

Cheers! E. TN is my favorite summer vacation spot

Thanks for some good ideas and reminders. Back when I was doing a lot of this work, I used brand new Exacto blades, and straight and a straight edge to trim decals as close to the letters or logos as possible. Then, after covering everything with dullcote, it ws very hard to impossible to tell I had used decals at all.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for the feedback!

You can also do what I call "proto-freelance" where you can model a railroad that is in real life, but you can run what you want. So you could model the ATSF 1 to 1, but you can also have the DD35 as a "well they saw they did good for the UP, so the ATSF decided they would test one, and they just never got rid of it and painted it into an ATSF paint job" Just remember, it's your railroad, you can do what you want. Just make sure you don't accidentally "destroy" a valuable historic piece.

@ToyTrainTipsAndTricks

4 ай бұрын

👍

Awesome tutorial! This is something the hobby has needed. I don't think yellow text on black will work well. I was making an Interurban car that had gold numbering on dark green background. I used clear background paper and the letters were dull and unreadable. I am hoping for your sake and mine that you can find a way to put light text and logos to dark backgrounds. Thank you!

@ToyTrainTipsAndTricks

4 ай бұрын

👍

Pretty cool thought about doing something like that eventually,lotxx sd of fun thanks for sharing great info 👍

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks!

Who does not love customizing their trains I know I have for my fictional S&C RR with a 4-4-0

@ToyTrainTipsAndTricks

4 ай бұрын

Excellent!

Thank You it wuz neat and educational

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks!

Thanks for sharing this

@ToyTrainTipsAndTricks

4 ай бұрын

My pleasure

I’ve wanted an O gauge 3 rail diesel locomotive painted for the Dakota Minnesota and Eastern but none have been made. Lionel made an Alaska set with a #1804 GP7 in blue and yellow. It’s not far in its color scheme from the DM&E. I found a set on CL with the engine not moving. Turns out that the gears on the motors often come loose and they won’t pull a knat. I got the entire set plus extra cars and track for $60. The engine train sounds is fantastic.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for sharing!

You should be able to get a darker black when printing on white decal paper and trim close to the letters with a very sharp scissors. You may have to move on to another graphics software that gives you more pigment shade selections. Black for me is easy to print. I have been doing this for 20 plus years. The secret for graphics printing is to do the artwork in full scale, then print at a percentage down say 5 percent and that will give you crisp lines without jaggedness in the lettering or graphics. My train items I did were lesser collectables, most original my grandfather did back in the 70s with a brush and commercial decals. He worked for the Pere Marquette and C&O railroads. I did re-strip his down and redid them with modern technology. He had painted over some expensive trains once I got his paints off. Thanks for the videos, I enjoy your channel.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for sharing!

@user-om9jf4yf4o

3 ай бұрын

@@ToyTrainTipsAndTricks , now just thought of it, to do the black make sure it is set to "PhotoPaper Glossy" to get a deep black background

@ToyTrainTipsAndTricks

3 ай бұрын

@@user-om9jf4yf4o On "photo" setting, my printer makes "black" by combining the other colors, and the colors separate on the decal paper.

@user-om9jf4yf4o

3 ай бұрын

Are you using inkjet white paper with an inkjet printer, then clearcoating after print is dry ? @@ToyTrainTipsAndTricks

@ToyTrainTipsAndTricks

3 ай бұрын

@@user-om9jf4yf4o Yes. The colors of the black separate before I can clear coat.

Awesome stuff!

@ToyTrainTipsAndTricks

4 ай бұрын

Thank you!

I've heard that oven cleaner is the preferred method for stripping the paint off of postwar diecast steam locomotives. Would you say that the degreaser could work, too? Thank you

@ToyTrainTipsAndTricks

4 ай бұрын

The degreaser will work on diecast but it is slower. If you can handle the fumes oven cleaner is faster on diecast.

That`s a Spicy Meat Ball.

We actually have a bowl similar to the one at 9:33. It isn't so large, though.

@ToyTrainTipsAndTricks

4 ай бұрын

Wal Mart:-)

@Engine1988

4 ай бұрын

@@ToyTrainTipsAndTricks I have no idea where the one we have came from. It just sort of was there... All I know is that it's Melamine (which whilst doing some research I found that it contains formaldehyde, which is very nasty stuff) and the same color. I don't think that we have a complete set. My dad is pretty much the only person who uses them.

Yeah the New York Central had the SDP.40 but I wish they had the SD.45.allsol...

If you used a border around the black area, say a yellow circle, you wouldn't have the two different shades of black right up against each other and the difference wouldn't be as noticeable

What I never understood on the early Lionel and Mark's trains but I'm not sure about American flyers or others trains was why they didn't put a second coupler on the caboose......

@ToyTrainTipsAndTricks

4 ай бұрын

They put a second coupler on "work train" sets and some premium pieces. Most 3 railers never do any switching anyway, and 25 cents a unit times 10,000 units adds up.

We all know that the proper pronunciation of many cabooses is cabeese 😂😆😂

@ToyTrainTipsAndTricks

4 ай бұрын

:-)

do orange lettering for black locomotives

One drop of detergent in the warm water releases the decal film a lot quicker. It breaks the surface action.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for the tip!

Save some packaging material and glaze the windows with clear plastic

@ToyTrainTipsAndTricks

3 ай бұрын

Good tip!

Not ALL inkjet printers can do this. Check the box the ink comes in; if it is dye based, it smears as it prints the decals. The inks must be pigment based, and not all printers use that kind of ink.

@ToyTrainTipsAndTricks

4 ай бұрын

Thanks for the tip!

@ToyTrainTipsAndTricks

4 ай бұрын

I just checked the Canon printer that I used for the video. The black ink is pigment when set for "plain paper", dye when set for "color paper". The decal instructions say to set the printer for "plain paper". The colors are dye. They are not in the video, but I have made color print decals using this printer in the past with success.

first to view and comment