Can add this to the discussion. All my 10yo Makita tools were caught in an unexpected weather event recently and were completely submerged in their plastic tubs for about 48 hours until rescued. I was devastated, and prepared to replace everything, but to my utter amazement, all the tools, batteries and eventually chargers dried out and began working again. 9 months later and all are fine and working as well as ever. I did buy a couple of new batteries and a charger just as a offering to the Makita Gods for their beneficence. Changing brands would be sacrilege for me after all that!

@realpatriot5896

7 ай бұрын

Interesting that you brought this up. I dropped my oldest Bosch cordless drill in a creek when I read building a bridge over it. It went completely under water and I had to go get wet to get it out. I jumped right in after it. To my amazement it just kept working. At that point it was already so old I can't even remember when I bought it. Probably was at least 7 years old at that point. It is still going strong and I have only noticed a slight decrease in battery life. I ran a drill pump with it not long ago and it did great. It came with two of the 1.5 ah batteries and a charger. I still like Makita the best though I am very fond of Bosch as well. Just wish they made more tools. Bosch is great quality for the price you can get them at! Especially for the CPO refurbished ones.

@tracklizard4018

4 ай бұрын

Brushless tools are almost guaranteed to work after being wet. As long as you let them dry before use.

@FishBaitBlue

2 ай бұрын

Keep a close eye on those batteries though. Probably not a bad idea to store them somewhere they won’t pose a fire hazard.

@Galaxywolf712

15 күн бұрын

pretty much every electric tool can survive that the batteries are protected from water and shorts because of water its only the battery that gets killed the tool always survives since it gets provided the power by the battery but alot of the times the battery survives

@sueneilson896

15 күн бұрын

@@FishBaitBlue … fair point. Though 18 mths later all still going strong.🤞🤞🤞

It’s funny how people get super polarised by tools like they do with politics. They are tools… every tool brand makes good tools nowadays, Makita, Milwaukee, dewalt, Bosch even ryobi! I personally have Makita and Milwaukee tools, both living harmoniously together in my packout storage. Both brands are excellent

@AddictedtoTools

Жыл бұрын

100%. Couldn’t agree more. Many were confused when I used other brands, thinking I’m only a Milwaukee guy. I’m a good tool guy. They all have their pros and cons. It’s just east to get stuck on one platform because of batteries and chargers. I’m actually really excited to get more ryobi gear. Might make some leave the channel😂

@nathanc3189

Жыл бұрын

@@AddictedtoTools id put money on there being more ryobi tools in most households because of Bunnings or home depot than there are Makita or Milwaukee tools. You’d probably increase your followers to the much larger home handiman diy crowd. Ryobi are owned by same parent company as Milwaukee, have you seen the ryobi 12v tools? M12 cousin.

@Rockbottomsurf

Жыл бұрын

Get polarised by the fact you get locked into one brand once you’ve got their batteries.

@nathanc3189

Жыл бұрын

@@Rockbottomsurf you arent locked into one brand, youre free to buy as many tools and batteries from as many manufacturers as you want! yeah its easier having all the same batteries but even milwaukee has 2 battery systems you can buy into on their platform. i have makita and milwaukee batteries and i have never paid for a battery they always come with the tools or are added bonuses when buying during sales. its no biggie

@Rockbottomsurf

Жыл бұрын

@@nathanc3189 of course “ locked into one brand” isn’t necessarily true but owning a number of dual port chargers for my Makita batteries makes charging and carrying chargers more streamlined. Even if I were to go to a higher voltage platform I would stick to the Makita range as not only does it save me from having a number of different batteries and chargers but I find Makita rarely has a tool that bad that I wish I didn’t get it.

Makita has been by my side helping me do the work for 40 years. Great tools!

@brandonhoffman4712

4 ай бұрын

Makita is one of the top brands. I love plenty of makita tools. I sadly recently retired my makita drills after feeling the power of a new milwaukee impact with 4 modes. But that 40v 4ah has less capacity and output capability than that 18v 12ah milwaukee battery. Facts. More volts doesn't mean more power with battery tools. Bigger batteries do, or better batteries do (on a cell level). A great for instance is that makitas own 18v 5.0ah battery and thier 40v 2.5ah battery both contain the exact same number and type of batteries, just wired differently. Also 20v and 40v type branding is legal lying. They are all 18 and 36v in actuality. I suspect eventually all the branding will swap to the 20, 40, 60 standard as the EU allowed it.

I have also had Makita tools.35 years as a finishing carpenter.18 volt and corded.soon will move on to 40 volt platform.Good review👍👍👍

“Never tie yourself to one brand”-good advice I received by the tool associate at Home Depot.

@richymoto

2 ай бұрын

No ... buy a truckload of batteries and chargers instead ;-)

I'm heavy into Makita now and very happy with their tools. I'm off Festool now that my vac remote stopped working 4 months in and they say they don't warranty accessories.

Agree with the batteries 100%. Makita batteries have been bulletproof for me. I have 10-year-old batteries that just won't die.

@amateurvegan2636

Жыл бұрын

Makita are the very worst imo!

@mikek5016

Жыл бұрын

@Amateur Vegan you must use them underwater lol. I am not brand loyal. I currently have Dewalt, Makita, Milwaukee and a few Ryobi tools. Only batteries giving me trouble are Milwaukee. Seems to vary a lot depending on the specific model.

@amateurvegan2636

Жыл бұрын

@@mikek5016 I’m in the uk, the makita batteries might be different because they’re the ones I’ve always had the most issues with and the only ones other then Bosch 12v I’ve ever killed completely. Never had any problems with dewalt

@jeromebland8287

Ай бұрын

​@@amateurvegan2636I'm in the USA Makita batteries have lasted me years beyond their warranty ! I still have Makita batteries from 5 years ago working fine

@lkm55

Ай бұрын

I’ve been in Makita for years because of the batteries and the chargers.

I’ve always believed Milwaukee have the best tools for electrician and plumbers, but in terms of saws for carpentry it’s been between dewalt and makita (makitas 40V is the best for saws currently)

@JoeC92

Жыл бұрын

The thing I find though as a sparky working for a company that provides all our power tools, you are right they have the most tools for us. But if I bought any of these tools myself I'd be pissed. I think so many are biased because they pay for them themselves and no way would the have bought something bad right? But seriously Milwaukee may make the most powerful tools but their tools are not reliable. Hospital build currently with 45+ guys on site in less than two years 4 of the hydraulic punch kits dead all were brand new. Countless bandsaws down And at least the gen 3 impacts and drills are terrible. They can power through plenty of stuff yes but then just completely shit the bed. When I was non union I provided my own tools and bought Makita. No regrets. Even my impact that's 12 years old now first brushless they offered, still going no issues. Even speaking with other trades whether it be the concrete formers, welders and iron workers or plumbers/fitters. All Union trades so none of us actually provide our own power tools all saying the same Milwaukee has gone so far down with reliability. They aren't meant for the hard consistent use that comes on big commercial and industrial jobs. Go figure the greenlee punch kit I now have at work that we went back to using is still going strong when it's 8 years old and the Milwaukee ones are dying every few months. Milwaukee may warranty them but it doesn't matter it's 2-3 weeks waiting for them to warranty and get them back to us that's 2-3 weeks of lost production because their $900 Punch kit that they advertise as professional grade can't stand up to doing 10 3" punches in a row without the pump giving up.

@kevinr3263

Жыл бұрын

I agree dave

@gorkyd7912

Жыл бұрын

@@JoeC92 Milwaukee used to make REALLY reliable tools and you can still find 15+ year-old impacts and power drills in use on job sites, but I think more recently they might be slipping. They grew into a lot of other areas. Like, I don't remember ever seeing Milwaukee gloves or pliers, when did they start making gloves? Great gloves too, and their lineman's pliers are arguably better than Klein for less $$, but meanwhile for power tools: I'll take the DeWalt chainsaw and Ryobi for everything else.

@JoeC92

Жыл бұрын

@@gorkyd7912 100% agree. I've been with the same company for 10 years now and we never used to have the issues we have now and always been using Milwaukee. I'm yet to try the Milwaukee pliers but ditched Klein for knipex and never looked back

@JoeC92

Жыл бұрын

@Adirondack Homestead that was me for Klein tools too. Got sick of having to constantly replace screw drivers and pliers because the tips round out so quick or pliers can't cut anymore. Switched to wiha drivers and knipex pliers and no issues again. I don't get how so many can look past the lost time from broken tools and not realize the loss. The company I work for is huge, and multi trade we have a Milwaukee rep dedicated just to our company and the service still takes 2+weeks. Too much lost time I wouldn't be surprised if they switch from Milwaukee soon. Same thing happened with the rental company for boom lifts etc. Lifts the break down and then they take a week or two to come service them while still trying to charge $3000 a week in rental fees. Stopped using them and switched to one of the others that at least comes when you call them.

When tools were corded you weren’t limited to “tool platforms”. For framers, each company was known for and by specific tool groups. Best wormdrive saw, Skill. Best Saw-Zaw, drills and hole-hog, Milwaukee. Best jigsaw, power-planner, and laminate router, Bosch. Best 12” compound miter box and 10”job-site table saw, DeWalt. Best 1/2” impact and 3 horse plunge-router, Makita. Best framing gun, Hitachi. Best to horse fuel tank compressor, Emglo. All the name-brands crossing over to cordless was a smart move because it locks you in to one brand and creates repeat business on expensive batteries. I’m really surprised Skill hasn’t come up with a cordless version because Makita’s 40 V cordless can go a whole day on a framing crew without having to swap out batteries.

@randomrazr

9 ай бұрын

is a universal battery for all brands possible? XD

@realpatriot5896

8 ай бұрын

I use Makita, Bosch, Metabo HTP and Kobalt. It depends on the type of tool you are talking about on many of them. However, there are great tools from some brands in the same categories as well. For instance, both Bosch and Makita make great cordless sliding compound miter saws. Kobalts 7 1/2 inch cordless compound miter saw is awesome as well for it's lightweight and easy portability on a folding portable stand like the Delta stand. I favor Makita tools as well but Bosch makes some great tools as well just not as many. Kobalts are pretty good but definitely not as durable as the others. Metabo HTP's cordless tools are good for the most part but very expensive and there cordless compound miter saw is not so great. However, Metabo HTP's cordless nailers are the best and you can find deals on them at times where you get free tools with them buy purchasing another one of their tools. You pretty much have to do a lot of research watching videos and reading reviews. I do not agree that one needs to be limited by a battery platform though. I have found you can get into any of them by for instance buying a starter kit and getting a free tool if you are patient and vigilant.

@randomrazr

8 ай бұрын

no no no no on the internet u can only fanboy one brand, not muktiple@@realpatriot5896

@wildechant3667

7 ай бұрын

There are adapters one can purchase to run Milwaukee batteries on Makita and dewalt, Makita on dewalt and Milwaukee and Bosch, dewalt on Makita and Milwaukee and etc.

@reaperreaper5098

4 ай бұрын

@@wildechant3667You lose a ton of performance, some batteries can be killed if used with certain brands because some companies put the BMS in the tool while others put it in the battery, and some are just fire starters

I'm a Makita fan due to the weight, ergonomics and reliability,I'm using gear all day and the Makita gear generally feels more comfortable in hand, less weight hanging on my belt and less downtime due to tool breakdowns. So far the only Makita tool to fail on me has been the gib screw driver

@dickphan

Жыл бұрын

Right on deano.....makita is the lightest of them all and comfort for all day use is top scorer....all my Milwaukee sits in the draws ....always go for my makita gear first...

@henryairconcepts2999

Жыл бұрын

Makita is super reliable and cheaper overall than milwaukee. My first Makita 18V battery 3ah bought in 2012 and still works. I have M12 tool range as well though

@nouun

11 ай бұрын

Funny that you mention weight, one of my friends has a Makita drill and while I do agree that it does feel a bit nicer, the skin alone with no battery seems to weigh almost as much as my Milwaukee drill plus a 5Ah batter.

@Greg-ds7nd

10 ай бұрын

With the option of battery adapters now I've decided to adapt what I think is best in category to use. I have Milwaukee most but I like makita circular saw due to the dust shoot. Milwaukee jigsaw is not very good chips and frays edges when I use down cut blades so I use a dewalt .

@randomrazr

9 ай бұрын

is dewalt good or sucks?

Thanks for this info. I'm retooling right now, I just gave all my milwaukee tools to the contractor that just did my bathroom, he was just getting started, did a great job and probably didn't charge me enough for the bathroom so I gave him several bonuses like that and will use him again. all the makita stuff I have like the floor plainer all is plug in, I could still go either way. Great video, again thanks, I needed this right now

Great video. I am on a few of the battery platforms. I would say that you will probably want a table saw when it comes to fix out depending on how detailed your job is. All the best with it!

Makita is a great brand I still have battery and drill that are ni-cad 14.4 and 18v. Don't really use them but they're my first kits I ever bought. Now I have all milwaukee mainly because in my area Makita doesn't have as much tools that you can pickup same day. Nowadays they're all good just get the ones that fit more comfortable in your hands.

That extraction system is awesome! Would love to see a video of how you set it up when using it for different tasks

I completely agree, I had the same problem with Milwaukee, most of their high output are weak, unreliable mostly the 12.0, and the circular saw 7 1/4 fails a lot, over a year I switched to Makita 40v and its amazing, the 40v Saw its the best and I haven't had any issue with the batteries, the charger charges fast and has dual fans its just amazing

My oldest makita battery is 13 years old and just failed. They were 3.0s and never faltered in work time. I still have a few 3.0s but currently own 5.0 makita batteries along with my dozen makita power tools. Always been happy with their products since 2004

@ron1martens

Жыл бұрын

Dadi Omega. The 5 amp hour batteries are quite good. The structural engineer I do work with has some of the 5 amp hour. The battery lasts quite a while on the grinders.

@BraveStarEric

Жыл бұрын

Makita is the best

@michaelbronson7410

4 ай бұрын

I've got 2 makita 1.5ah batteries i bought with their very first impact that are over 15yrs old and still going strong. Also that 15+yr old impact wzs still going strong until it was stolen about a year ago

@shawsie5780

4 ай бұрын

I'm still running a 3amp from my Makita kit I bought in 2009 👌

EXTREMELY HELPFUL! Thanks. As serious DiYer with limited budget who does stuff for friends in exchange for buying a relevant tool, this was perfect. I've been very impressed with my 4Amp Milwaukee drill driver pack so considered going Milwaukee for more gear. But love my Makita corded saws. Think I'll go 40V Makita tracksaw etc - matches what I do

@ckm-mkc

Жыл бұрын

I have an older Makita 2x18v tracksaw, it's awesome. Storing the rails is a pain, but they are x-compatible with Festool if that matters.

@cuebj

11 ай бұрын

Thanks. I have a Makita corded circular saw with an accessory that lets it work on track, so I have a piece of Makita track already. I also have some homemade tracks up to 8' / 2440mm that work very well with my 230mm blade Makita circular saw.

I’m a sparky. And always been a Milwaukee guy. But recently as my impact driver and grinder has died. I felt the new impact from makita and thought it felt way better built and comfortable to use then milwaukee so decided to jump Over and get a makita grinder and impact. Really impressed with makita quality. Potentially making a switch as my Milwaukee stuff dies.

@jensvincent4702

Жыл бұрын

Yeah…I’ve used makita my whole life and tried Milwaukee impacts and they just don’t feel right. And my Milwaukee buddies try my makita for certain things and say the same thing. Idk how to explain it.

@mrbd9286

Жыл бұрын

I know someone who works for makita and believe me they are hiding alot of secrets regarding their dredful tools

@craigstaples6465

Жыл бұрын

Makita didn't make the field test for us... Milwaukee has the fuel for us

@nickrouse1738

8 ай бұрын

Are you comparing it to your old Milwaukee or the new Milwaukee?

@JarvisJiri1998

8 ай бұрын

@@nickrouse1738 I picked up the new Milwaukee when I was in the store and the makita impact was leaps and bounds better, lighter smoother better feel. The Milwaukee grinder I had the paddle switch has a spring in it which failed early. Just seems like a robust solid tool with relies on a cheap spring to work. Now it’s useless. I opted for the makita grinder with the toggle switch just seems bullet proof. Don’t get me wrong though I love all Milwaukees tools they’re great but just wanted to give makita a try

Woodpecker makes a tool you can attach to the track of your saw for repeatable cuts, you can also cut thin strips with it, basically replacing a jobsite table saw for ripping boards.

Ive been running 18v makita tools for about 12 years. There great, i have over 50 makita tools. The only issues ive had are with the multi tools. Ive probably had 8-10 of them iver the years. Dewalt and Milwaukee especially are SO UNCOMFORTABLE in the hand. Its like the designers and engineers never even put the tool in their hands. All my Makita tools fit my hand like a glove and give me complete confidence in the task at hand.

As someone who owns a lot of Milwaukee tools, I will say everything you are saying is 100% correct. I have way too many Milwaukee tools to completely bail on the M18 platform, but there are a lot of tools that will be replaced with the XGT. I did buy the Milwaukee traksaw, which is a great tool. But no Bluetooth dust extraction. Sometimes I feel like Milwaukee is tone, deaf to what is going on around them. I like Milwaukee but I’m feeling frustrated with them as a Company right now.

@nickmilone5996

8 ай бұрын

You know you have to be one of the laziest tradesman in the world when not being able to turn on your dust collector remotely is a problem that affects your work.

@steffendetrick

8 ай бұрын

@@nickmilone5996 t’s not remotely it turns on automatically. And when you have a shop like I do with guys working in it that don’t always turn on the dust extraction it’s a helpful feature. Not everybody’s situation is your situation. And regardless of that fact, every other premium brand offers Bluetooth dust extraction. Milwaukee is also the same company that offers one key. And one key offers some pretty useless gimmicky features so the concept definitely isn’t beyond Milwaukee. They were just being cheap. But I’m sure Milwaukee appreciates you defending them for giving people less for and charging them more.🤦‍♂️

@nickmilone5996

8 ай бұрын

@@steffendetrick so again, lazy shop workers don't wanna turn on the piece of equipment that is literally in their hands. If your workers are that against doing their jobs then you might wanna look into Festool. Connect to their dust collector and it turns on automatically when you use your tool, perfect for this guys that can't be bothered to turn on the thing they're using.

Started on Makita but went to Milwaukee about 12-13 years ago as they had a good deal I couldn't refuse. I still have the original battery. I agree as plumber Milwaukee has some products that work better e.g. the new 12v sump pump and the 12v small tools as they fit into tight places. Also to note the 12v vacuums that fit into the hammer drills are pretty cool as they fit into tricky spots. But def the power advantage with Makita plus the bluetooth would be cool. But it all depends on the type of work your doing. I just hate how you have to lock into one product. Pick what works and don't be afraid to look at new things or think differently. Also I like the idea of the coffee machine Makita does, I could def do with that in the tool box.

I've spent a shit ton on Makita tools for woodworking and properties management. Always a pleasure to use them. I've also saved some money by buying their corded version like the electric planer and the miter saw which is by far my favorite tool. Even the wife gifted me the handheld vacuum and subcompact line knowing that's gonna end up being used around the house. But when I see a builder using heavy Makita tools for framing, HD renting them, and this summer saw Disney World maintenance crews using Makita at their resorts, it reinforced my choice.

@dangrimes5078

Жыл бұрын

At least it was a shit ton and not a shit load.

@Willg95

Жыл бұрын

I've been on the makita lxt system since I bought my first tool set back in 2013. Which is still going strong to this day. But have since been replaced with brushless models. But still get used often. My brushed impact wrench has been relegated to home use and replaced with the brushless high torque impact wrench for my work truck. My brushed recip has been replaced by the xgt 2nd gen recip on my work truck and relegated to light duty home use

@kevincedeno8899

Жыл бұрын

@@dangrimes5078 Yep, definitely makes a difference. Lol

@AlexKall

6 ай бұрын

After watching a certain Irish bloke repairing tools from the big major brands I got even more sold on Makita, who actually think about making them repairable without it costing more than 50% of the tool to repair.

You make some valid and great points. I switched from DeWalt about 4 yrs ago and have went strictly Milwaukee. Overall I am happy. However the Mitersaw, lack of AWS and issues with 12ah batteries have dimmed my excitement as of late.

@brandonhoffman4712

4 ай бұрын

For miter saws I just love Bosch's cyborg arm. For the money it's the most robust system to counter deflection I've seen. Even better than those new arm style saws that have tried to copy bosch have done an inferior job. Mine survived a car crash and still slices and dices. The truck didn't fare as well, (I was not there). It's an older plug in model. I don't think for bigger tools I want battery power, I want robust power, quality dust collection, and dust collection that can turn on automatically with any tool I plug into it. Plus I don't want to get stuck waiting to charge. Not sure what your issue is with the milwaukee 12ah? I've never had problems with them other than taking forever to charge. But that's because you need rapid chargers for the big batteries. Heck if I was using 12ah ones a lot I would consider the supercharger. It charges a 12ah in 1 hour. Capacity wise, the m18 12ah has more capacity than the makita 40v 4ah. It's like a 40v 6ah battery.

Thank you for your time and your great explanations. It's all consistent with my decade experience. Thank you again.

I am a makita man for my work but use the Milwaukee packout tool box’s due to their drawers and the quality and strength.

Own a bunch of Milwaukee power tools and batteries and never had a issue ever, except for thieves who love to steal Milwaukee tools

Really excellent review, man!! I’m a tradesman of a different stripe, not carpentry but airplane mechanic. Love to All tradespeople. You broke everything down really well, and I learned a useful chunk about carpentry and stayed interested even though it’s not my normal thing, very well done. I’ll echo that all modern tools are Great, from Ryobi on up. I’ve got a 7yo Ryobi 12v drill that was 50 bucks, and it was basically faultless the whole 3yrs that it was my only drill. Durable, plenty of power for mechanicking, batteries last forever, better trigger than my newer brushless big brand drill, can’t say enough good about that Ryobi. So All the modern stuff is great. Pick a platform and go to town. That said, it looks like for carpentry, Makita is on the ball.

This saw kzread.infoUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B comes in handy in many ways. When I had a small (dead) tree fall I started the process of disposal by using this saw and cutting off the small branches. Then slowly work on the small trunk with undercutting and letting it fall down. With many trees on acres of land paying for a tree service can be expensive. It also is nice in that it can be used in hard to get areas like along my creek. It's also safer and quieter than a chainsaw. It obviously can't cut down massive trees but it does work fine for small ones or brush. And of course since I already own a Black

Milwaukee has always been marketed towards the electricians & plumbers. They were best known for inventing the recipro(Sawzall) and the best corded drills. Especially compact right angle high torque used for 4” hole saws. All the of the plumbers in the States have them.

@waterloo123100

19 күн бұрын

When they invented the sawzall they were still a American company 😂

I run 18V Makita and 12V Milwaukee. Makita drills have constantly let me down but maybe I asking too much from them using holesaws although there was one model that was fundamentally flawed which many people I knew had the same problem. Anyway, apart from that I have flogged the Makita’s and they are great. You are correct in regards to Makita being better for carpentry as every Chippy I know runs Makita and/or Festool.

I think the main thing holding people back from going all in on xgt has gotta be the prices. Having said that they do make some solid ass tools

@jefftucker9225

Жыл бұрын

I'm mainly a Makita guy but certain tools they make are over priced IMO, I have a corded Dewalt job sit table saw, Ridgid Jointer, Dewalt Planer, Bosch Miter saw, Craftsman cordless 18g nailer, as well as a Craftsman cordless 7 1/4 miter saw, as far as Corded tools I buy the best bang for the buck and go craftsman for cordless tools that cost to much in the Makita line

@user-gb2gq8lb3s

Жыл бұрын

You (the customer) cannot win these days. Milwaukee are decent tools but could suffer from reliability, Makita are reliable but I think many of their XGT tools are way too overpriced.

@dickphan

3 күн бұрын

bloody hell..my local tool store had a sale recently and was contemplating between Makita xgt 6 pce kit for $3100 or the hikoki 36v 10pce kit for $2200.... eventually went with hikoki....but still in the back of my mind I some how I do think Makita is better built....knowing myself I'm going to buy into Makita even with the next sale...love tools as a collector.....

As someone who works in the plumbing industry as an estimator and quantity surveyor (in new Zealand) most of our guys on Makita while some are on Milwaukee. A lot of guys prefer Makita because of there redemption programs whereby they often batteries for free via redemption when buying a kit. I've looking at getting the 40 volt 6 piece kit. The 40 volt drills are a lot nicer to use so are they saws and there outdoor gear is great. I've been wanting on there self propelled mowers for a while

I switched from Milwaukee to Dewalt because I had problems with the first three fuel tools I bought and shocking aftersales. Dewalt have been more reliable for me as a carpenter & joiner but I think Makita are good enough also.

@WIRTHAQUA

4 ай бұрын

Also run my business off the dewalt range. Love it

@thomasgilliam3104

4 ай бұрын

Dewalts 60v line is trashing everybody. Plus milwaukee is in trouble. Dewalts coming

@Patrick-857

2 ай бұрын

Dewalt is pretty tough and reliable but they aren't as refined as Makita. They are quite rough really. Makita tools are silky smooth to use and often times lighter and more compact. And as far as reliability goes, they are at the top. The red tools aren't very reliable from what I've seen. I run both Makita and Dewalt, but I'm finding when a tool needs replacing I'm reaching for the Makita.

Thats cool!!!!! I bought my xgt impact and drill to use around the house! When I used to work in construction thats all my boss every used, the tools never let us down, when I went to finished carpentry for a while they used rhyobi, which worked good for installing cabinets, etc for homes and all that! And at the end I just went for the xgt because they would be a bit future proof because of the 40v and not the lxt. So its all up to you! At this time they are all great performers!

I have had 5 milwaukee batteries die within the 1st year. Small business, I can't wait a month to run a tool. Makita is my tool of choice. I have never had a makita battery die. My Makita miter saw 36v did die this year, but it was 5 years old. I love that miter saw, so it's being rebuilt now.

I use to be Anti-Makita for absolutely no reason other then that I used all Milwaukee. I tried my friends Makita because my Milwaukee died, and WOW!!!!!!! I sold all my Milwaukee gear and switched to Makita. I find Milwaukee to be like an old muscle car, and find Makita to be a refined super car. Makita doesn’t seem to be powerful, but that is because I use to associate power with tons of vibration. Makita has power, but made it run smooth and efficient without shaking my bits off like Milwaukee. I’m glad I can now finish a day of work and still feel my fingers 🤣😂🤣😂🤣

@thorinbane

10 ай бұрын

This is important and rarely a factor for all these power videos. Ergonomics , esp for smaller hands/ less strength is important. You might be a bear in your youth, but as you get older all those repetitive strains matter.

@f1reguy587

3 ай бұрын

What are you talking about. Fix your tools…

I love you still have your original Makita drills. I still have mine from 13 years ago and both still work, even though the drill has been smoking more than a few times from mixing drywall mud. I also agree that Makita is more Carpenter focused than Milwaukee

I have used Hitachi and now metabo hpt they have served me well mate

I install windows and doors and use Makita 18v and dewalt 50/50 . The Makita impacts hands down destroy all others but I do prefer the dewalt 7 1/4 battery mitre saw that I use to cut trim and simply use a 9 ah flexvolt battery on .

Great video. Exactly how I feel about Milwaukee at the moment. Not really happy with the large batteries and the lack of tool and vacuum communication.

Milwaukee tracksaw is coming out February in Australia. But makita has really gone above and beyond with their XGT range

@AddictedtoTools

Жыл бұрын

February almost seems too soon for aus. Would be good though.

@philwort1873

Жыл бұрын

@@AddictedtoTools it is funny how milwaukee releases go. After the pipeline events in the us some tools we get super fast (M12 nibbler) some much later (track saw) some never!

@AddictedtoTools

Жыл бұрын

Yeah I’ve always wondered how it all worked. I’m sure they have reasoning for why they release gear at different times or not at all.

Nice one! Adding another better platform hurts initially when buying new batteries and chargers, but it also frees up existing batteries for those other branded tools, and more importantly opens up a whole new range of tools to cater to ones needs. Let the tool choice dictate the battery, not the other way around.

I’m heavily invested in Milwaukee but as tools are starting to fail out of warranty and my batteries are starting to go I’m faced with a few decisions… the new Milwaukee shop vac eats through my batteries worse than you could imagine. Thanks for the video!

Well explained! I'm with makita since 2016. 🤘🏼👊

This video is perfectly correct…a wise choice..not just a brand slave…change when its favor you more to solve the problem….many just read the spec etc. but the real worker on their own field knew which brand to choose for the ergonomic and conveniency…for example which one would fit the tight space better etc.

Another great video thank you. Makita have been top notch gear forever and before I started my plumbing apprenticeship in 1975 at 15 years old. They always set the standard for the others to achieve.

@keithburt4734

Жыл бұрын

What would you rather do run around for batteries and chargers or plug a cord in once.

@cackle067

Жыл бұрын

What an absolute load of crap There are several Milwaukee tools that leave makita for dead There are some makita tools better than Milwaukee To say makita is the one setting the standard is garbage Give me the Milwaukee angle grinders over makita any day and their impact drivers and impact wrenches and grease guns Would go makita for their saws is about all Makita impact drivers are nicely balanced but Milwaukee grunt kills them

@CrossCut_Custom_Builds

Жыл бұрын

Not true Makita has always been behind Dewalt and Milwaukee in innovation. Not to mention no high output batteries for the 18 volt line.their impact drivers do not cut it if you're driving big fasteners. I have their cordless track saw which I like except battery life is not great thanks to outdated technology.

I use Milwaukee on the job. My colleague uses Dewalt. We use each other tools from time to time. I find the Dewalt tools lighter. I also like the yellow and black. All of them do a great job.

I spent a decade doing similar work, larger scope interior focused remodeling, which almost always includes a decent amount of cabinetry and finish trim work, before finding my current specialty. These types of remodels are so broad in scope they have the widest requirement for power tools compared to more narrowly focused trades. That makes these types of outfits very good judges on tool platform choices. They regularly use such a wide variety of equipment ranging from hammer drills for light concrete and tile demo to fine finish tools like track saws and and routers. I’m sure this guy has lots of secondary tools they use often but not every job

@ron1martens

Жыл бұрын

Marc. I'm a plasterer by trade. Although I had to diversify to cover many aspects in the building trade simply to remain in work. I have tool boxes for bricklaying, concreting, carpentry, plastering, ceiling fixing, tiling. I did maintenance work such as using demolition hammers. Moving into the battery range. I do wish to purchase a cordless mid size sds max demolition hammer. I have the metabo 18 volt sds plus rotary hammer. Its pretty good. I did have a 36 volt metabo4 amp hour.It got stolen along with other tools.So I replaced. Yes, I'm also a tool person. It did get me work however. I get asked can you do this? I say yes I can. Sometimes I don't know how. I figure a way and just do it .

Still can’t believe you haven’t got a black and decker drill yet 😉 I have both makita and just got onto Milwaukee both as good as each other as you said in certain fields

Thank you for your observation with information on the mechanical

I had a brand new Milwaukee 5ah battery die within a few weeks, but replaced under warranty without questions. I went with the Milwaukee set for home DIY. Once I'm in the ecosystem, I'm not changing because it's too expensive. I love both my M12 and M18 gear.

@JoeC92

Жыл бұрын

My issue with that warranty thing is the lost time. I hear that a lot from the Milwaukee fan boys of 'Oh if it has issues though they have a 5 year warranty' They don't give you another tool while you wait for yours and at least in my experience it's 2-3 weeks waiting for the replacement or repair. That's 2-3 weeks of lost production because their tools couldn't keep up with the work they advertise them to do. A lot of the trades here seem to be switching over to hilti for that exact reason. These tools are bought to make us money through our trades yet if they are constantly down and waiting for replacement then they're just losing you money.

Makita is leading in the lawn & garden battery category right now. Light and durable!

I love ur channel !! Soooo helpful and resourceful 💪👌👍

I have Milwaukee, dealt, makita, and festool. They’re all good depending on the tool you need. No brand it perfect. Makita track saw is my favorite tool. Love the m12 line. Although Milwaukee vacuums really missed the mark, no Bluetooth and two batteries…. They should have thought that out more.

A major plus for makita is that they are more wildly available on the second hand market. Cash Converters generally have multiple shelves full, rather than just a sprinkling of bosch or Milwaukee.

I have makita xgt, switching from Milwaukee. I find the fit and finish of makita xgt much better. The track saw and miter saw are extremely smooth and the xgt is handy with the battery vac.

Agree totally with your thourghts I run milwaukee at work as a heavy diesel fitter and run makita at home for handy man work around the house. Different platforms Different applications both have benefits

Residential electrician and I use M12 tools and Makita 18v. Makita has a way larger tool line for the 18v platform. Going to be investing in Makita 40v tools soon.

You definitely hit the nail on the head with Milwaukee batteries, I'm heavily invested in Milwaukee and Dewalt tool, I've had 5 Milwaukee batteries that won't fully charge, and I've never had any problems with my Dewalt batteries at all, and all my batteries from both companies are the same age!! Thanks for the video, Makita is definitely the way to go, they are just a little bit too expensive for me, but they are the best tools in my opinion.

Thank you for this honest review

Thanks awesome review

i am a milwaukee guy through and through, i love the banter between guys on different platforms, but makita has always had my respect. Id be on that platform equally as much as I would milwaukee, but i got on the battery platform on team red when i first got in the trades

@radurobert1

6 ай бұрын

Milwaukee was purchased by some conglomerate that have many brand names under their control so you buy only the name . On the other side Makita is independent . The same with Hilti .

I'm running ozito, love it!

Have always ran two platforms. The Dewalt flex volt is amazing. Especially the 12 inch droppy and the 7 and 1/4 cerc saw. I then run the 40v makita as there drills are so much better then the Dewalt and the track saw is amazing especially if you spend the extra and get the 3metre track

I went Milwaukee last year have had a couple issues with a battery and circ saw and been eyeing off Makita 40v range lately however the worst problem with Makita is no framing nailer. I'm a handyman so I need just about everything

@AddictedtoTools

Жыл бұрын

What circ saw problem? Mine had bad trigger problems. Worked intermittently which was painful. Nail guns have been a let down from makita. Not sure they haven’t kept up. I’ve been loving all the Milwaukee nailers. Cheers for the feedback👌

I’m not partial to any but I will say I bought the Milwaukee M18 21 deg framing nailer and the thing is AWESOME!

@user-bw5xf3yr3m

Ай бұрын

They got the best nailers

You said it best. For the service type trades, Milwaukee and even dewalt are kings. Makita however, still has better quality, better suited tools for woodworking/builder applications. That said, my first combo kit was makita and I haven’t bought any other brand since, once you have so many batteries or a well established set of tools it’s hard to switch so I’ve learned to live with some of the quirks of the mechanic based tools makita offers. I’ll be going with something like Greenworks for EGo for my lawn tools though.

@ckm-mkc

Жыл бұрын

I agree. I have Makita for woodworking, but mostly Milwaukee for working on cars.

@Willg95

Жыл бұрын

The funny part is I'm a tow truck operator and I carry only makita on my work truck. Makita tools have never let me down. I carry a makita drill, impact wrench and recip saw in the lxt platform. I also carry the 2nd gen xgt recip saw on my truck as well

@rooster-zg4oo

9 ай бұрын

Dewalt is known for carpentry. They make the best saws hands down.

I have all Milwaukee Fuel and am totally satisfied with their performance and reliability.

The Milwaukee framing nailer is the must have Milwaukee tool

Excellent comparison! As a Milwaukee bigot I have to say you were spot on with your comparison overview. I have over 30 M12 and M18 tools, plus 20+ Packout boxes and bags. So I’m committed and for the most part very satisfied. Milwaukee builds some excellent tools! However, I believe they’ve missed the mark with their new vacuum line, which looks excellent. Not having BlueTooth connectivity between vac and tools is a major miss. How the hell could that even happen?

@MrLocke-bk3om

Жыл бұрын

And lack of dual power is also a huge miss. Having to ONLY use battery power or not having passive charging is such a stupid idea for such an expensive tool

@DarthCuda

Жыл бұрын

There is a powerhead that has a corded or battery option. There a 3 configurations.

@michaelrjacobs

7 ай бұрын

What's the use of bluetooth when you are connecting a vacuum hose... Doesn't make sense at all.

@AddictedtoTools

7 ай бұрын

When you pull the trigger on the tool, the vacuum come on and turns off 2 seconds later. It’s extremely handy

@martylucas8557

7 ай бұрын

@@michaelrjacobs , it’s simple…instead of having to reach down to turn the vacuum on prior to starting the circ saw or miter saw or whatever tool, Bluetooth from the tool sends a signal to the vacuum, automatically turning the vacuum on. After the trigger on the saw or tool is released the vacuum turns off. If your making a lot of cuts it would be really nice to “not” have to reach down each time to turn the vacuum on and off. With Bluetooth connectivity you never have to worry about forgetting to turn the vacuum on or off. It’s just a very convenient technology that I’d like to see Milwaukee incorporate in their tools and vacuums.

Love the new makita xgt range

Usually it's the other way around, Australia, the UK etc. get new tool releases before we in the states do. I just ordered (from Home Depot) the 40 volt XGT 2.1 gallon wet/dry vac. Like my other Makita cordless I'm sure I won't be disappointed. F.y.i. the Milwaukee single battery vac has 95 cfm and the dual battery 36 volt vac has 110 cfm. The Makita 40 volt vac has 145 cfm. The Makita 80 volt vac has 175 cfm and goes for almost $2,000. Cheers!

Hit the nail on the hand at 6:20 with your statement “what work are you doing and what finished product do you need?” Blows my mind watching the average house husband shelling out $500 USD for the newest Dewalt, Makita, Milwaukee, Bosch, Flex etc and then to overhear he’ll be using it to put small screws into drywall anchors to hang pictures. Most people not in the handyman, construction, blue collar trades industry *do not ever need* to care about brand for day to day house work. The professional framer who drives structural screws all day long definitely cares which impact driver, rotary drill, or impact wrench drives the quickest and easiest and which battery runs longest and best on it. As a PSA, please stop buying top of the line gear for household DIY stuff. You can get the cheapest most off brand piece of crap on the market and it will do the job of hanging those pictures just fine.

@AddictedtoTools

4 ай бұрын

Cheers mate. I fully agree. A lot of the time the tool will only be used a few times. Don’t have to buy the top or the most expensive

I think most of us use all brands. I have mostly Milwaukee but makita has been making its way in shop for plugged in devices.

Thats why i got Bosch Pro for everything in my home. I am no Tradie in any form, but the quality is for me the best, and you get some nice bonuses from Bosch. I Bought a tool set with SDS Plus Hammer Drill and an Drill for 329€, but you can get additional things from a programm called "Pro360". For the set i bought, i got an additional Impact 1/2" Impact Driver and two 5 amp 18v batterys for free. That and i can walk in the Bosch Shop a town over, drop of my defect machine and get a replacement right there. And Bosch startet AmpShare, a system for share batterys over different tool companies

I've had Makita drills since 1987, although I bought a number of Ryobi tools between around 2005 and 2015 as their line expanded quicker and at a lower price point. The past few years, I've gone back to Makita with the LXT platform, and I love them. I'm hoping the XGT platform doesn't result in them phasing out the LXT line. 😬🤞

@maaduece5132

Жыл бұрын

I talked to a rep the other day he said that it wouldn't be , that the xgt would be a pro line and 18v would become a home handyman type of product

@danovichi

Жыл бұрын

Yeah, their LXT stuff is here to stay, at least into the foreseeable future.

@pablosetien5548

Жыл бұрын

By the 80s Makita was all made in Japan , current Makita are made in China, I don't think is the same quality.

@travisjazzbo3490

11 ай бұрын

@@pablosetien5548 Makita is made in about 13 places, not just China. They have specs they have to meet in China. Most tools are made there. Makita is still the best overall quality

Love Makita and Milwaukee, only thing I would think to mention is that Makita have started releasing tracksaw compatable circ saws (I think the 190, 235 and 270mm), so if you were looking to get a track saw and a circ saw its worth looking at.

@digitalparadigms

Жыл бұрын

So worth looking at, but you might have to get them via eBay. At least in the States. :/

@PimRademacher

Жыл бұрын

Depends on your cuts though. I have both the 40v track saw and a track compatible 40 v circ saw, but for plunging the circ saw is obviously useless. Both of the saws ooze quality though and I love working with them. Weren’t even that much more expensive than their 36v counterparts. AWS is awesome by the way. I love not having to think about starting and stopping my vac.

Damn that Bluetooth extraction is probably so nice to have

I have Makita 18v and Milwaukee 12v (mostly Fuel). Very happy with both, but I will say Makita tools feel smoother to use.

I’ve had the exact same issue with my 9ah Milwaukee batteries. I took them Back to exchange and they were only charging to 3 bars after 5-6 months

Makitas new XGT line is absolutely beautiful and top of the line tools. That said, Milwaukee also has good tools as well.

Very good walk n talk around the issues , great and fairness . I now like and subscribe Bob England

I started on Makita, because I brought the pink drill. No man in my family will steal it, because they clearly see its pink and it's mine 😂 Then came the mini trimmer and vacuum...and now I am hooked. Going to get the orbital sander next.

When I first started carpentry I started with all Dewalt because everyone else had makita. Then I made the change and it was for better. Makita may not be the strongest but they sure are the smoothest and quietest tools.

@MrTmone2169

Жыл бұрын

All day

@markcrystaltownsend1578

Жыл бұрын

Bosch are under power but even smoother than makita . Especially when using their better stuff . I rate there drill Especially I don't own one but the one's I've used in the past felt better than drills twice the price.

I first started using a cordless drill, Makita, in 1989. Then got a Dewalt then back to Makita. I use to think it was a good idea to only run on one platform and back then it was a good idea but now I run four platforms for different reasons. I really see no reason to run only one and only one. The only downside is you need multiple chargers which for me isn't a big deal. Each maker has their strengths and weaknesses so I just take advantage of multiple companies strengths and don't bother with the weak stuff.

@jairoguzman4631

Жыл бұрын

Have you tried the charging adaptors for 50$ Amazon ??? Any brand any battery

@daifeichu

Жыл бұрын

@@jairoguzman4631 No, I haven't. I don't have any need for an adapter. I've got batteries for all four systems. In fact just a few days ago I got back into Dewalt so that now makes it 5 platforms.

@chazschuck9017

Жыл бұрын

I'm the same way. I've got M18, M12, LXT, and XGT. Doesn't bother me as much as most people to drag a few extra batteries around. I do use mostly Milwaukee for work (electrician), and mostly Makita for home use (woodworking, general construction, etc). However I mix and match plenty, and always prefer to be able to choose between each platform for each tool, and get the highest quality.

I’m on the Milwaukee and makita xgt platforms, I can’t honestly say I could be on either platform fully! The Milwaukee 16 and 18g and framing nailers are phenomenal and they have tools that xgt just don’t make yet. I have the xgt mitre saw, 190mm saw, combo drill and impact, recip saw, planer and track saw that Milwaukee just don’t compete with

@Alex-uh1mj

Жыл бұрын

Dont compete on the recip saw?

@Hobiee90m3

Жыл бұрын

@@Alex-uh1mj yeah the recip saw from Milwaukee is the staple but the new flex looks pretty good too, coming from a dewalt guy

@mjolnirswrath23

Жыл бұрын

I expect them to DeWalt tools going from Porter-Cable junk essentially saved up earned it bought it bought the kits when they had the battery included or multiple batteries and chargers etc been running for about 5 years now non-stop Trim carpentry rough carpentry beam work you name it and it's been going non-stop however DeWalt makes really poor nailers in the cordless range so I use battery adapters from Amazon and been running those for about that long too for my Milwaukee nail gun Brad nailer and 15 gauge by dewalt batteries are still going strong they have never had an issue They seem to have a better system and backup system One thing I have noticed is a lot of people that use Milwaukee on the job site They have battery issues also the bearings go out on their tools especially the impacts and the drills and the same goes with Makita The batteries go out especially if it's cold they do not like cold at all My DeWalts will run in the cold No problem I also was smart about it and built a battery box with two chargers so that when I'm charging my batteries it's also an insulated box it's got two fast chargers inside and then I bought Amazon battery lockers to go on the walls of the inside the box so roughly I have 15 batteries ranging from 5 9 ampere hours 3 6 amp your hour several 2.5 and and a few fives I never have a problem with it I would like to get a 12 amp per hour but I think I'm just going to go with the cheaper brands the knockoffs and see how they do if not then I've only lost maybe a hundred bucks and I can get them replaced versus paid $250 a battery or $375 for a 15 amp I do plan on getting a 23 gauge Makita and then getting a battery adapter so I can use my batteries it's all the same voltage 18.6 volts the whole systems are

@clarkfos3447

Жыл бұрын

@@Alex-uh1mj The new Makita XGT avt recip saw is faster than Milwaukee.

@Alex-uh1mj

Жыл бұрын

@@clarkfos3447 ah okay, ive not seen any comparisons yet. Im too heavy invested in Milwaukee now 😅 better not watch

Big pro for advanced DIYers, they are the only premium brand (I think?) that also has stuff like gardening tools. I use my trimmer, their small chain saw, and their leaf blower a lot around the yard and they're great. Even if you are a professional, it's nice to come home and be able to use the same batteries for work around the house.

@juoj8

Жыл бұрын

Only thing I didn't buy makita is brad nail guns and impact driver, instead I went for Ryobi since they got better reviews. Can still use them with makita batteries using a battery adapter!

Neighbor gifted me a Makita drill in 2006. Two 1.5a batteries. Still working today. Still using them because they’re light and charge in 10 minutes.

I have a makita 1.5ah battery that is over 15yrs old and still going strong. Go makita!

My 1st Cordless Drill in 1984 as I started my apprenticeship as a Sheet Metal Worker was Makita 9.6 Volt Drill great drill ..! Just kept getting better as years. went .. Milwaukee made great Corded Drills .. back in 80’s couldn’t compare to Makita cordless ..

Coming back to the Light Side Luke!

i am Milwauke user i work as cabinet maker i love milwauke tools specially planer has dust bag , jigsaw , drill , i am not happy with battery system i changed from 5 amp to 6 and 8 amps batteries they last a while even rough use . but the drop saw i use is makita 40v 216 mm 2 brands at the moment.

I want Milwaukee to upgrade their planer for sure!) Wish you luck

I have been a diehard Makita man but absolutely had to get the Milwaukee nailers. Now I have a bit of a mixed bag. Just got the m18 chainsaw and quiklok system. If the batteries are like what you described I may have made a big mistake lol

@Pat672

Жыл бұрын

Yeah, the Milwaukee nail gun is insanely good Hopefully Makita releases a makita 40 V framing, nailer

Great video bro. I'm a mechanical engineer in NZ and have run Milwaukee for over 10 years and have found this platform excellent. However, I do agree that the higher amp hour batteries are debatable, they take ages to charge. I use a wide range of skins on both the 18volt and 12volt system and find them very good. I do like the Makita Bluetooth Vacuum system that can connect to other skins. Can this vacuum connect to a masonry drill to remove the concrete dust?

@travisjazzbo3490

11 ай бұрын

Yes. if the masonry drill has vac shroud. All of Makita rotary hammer drills have vacuum connections for the dust. Many built right on the drill

I’m just graduating from hand tools to power tools for my framing and finishing; I’m leaning towards makita but idk what to start with

As a carpenter I use dewalt, millwaukee, makita, even festool. I used to have different batteries and tools. Its a personal choice which brand or brands and all have their + and -, but in general all tools are Professional made and good.

When are you going to start getting festool then you will have a real addiction ahah. Love the content mate good stuff

The Bluetooth is nice. Milwaukee does have a system to do it now but i believe it’s a watch and you hitthe button to turn the vac on. I love my Milwaukee stuff and don’t branch out in the cordless arena anyway cause i have so many batteries and don’t particularly want others. I do have some m12 stuff but the charger does both so it’s no issue. I do however have many corded tools of different brands and they are all great tools. Any of the big names these days will get the job done consistently.