Let me know if you have any more questions about the menu settings 👍🏽

@vincentlara1994

3 жыл бұрын

I have some questions

@sotirciprian327

3 жыл бұрын

How repair error 30?

@footbal921

3 жыл бұрын

How ro reset menu

@javierolivas6826

2 жыл бұрын

unlocking top speed?

@karolkordel

2 жыл бұрын

Could you enter the voltage values ​​in the VOL computer from 1 to 5.

Thanks for this! I needed to lower the first gear so switching to 0-9 and then adjusting the first gear to 30% worked great for only throttle use.

You are AWESOME!!! my bike came with absolutely no indication of how to do any of that or what it means, so your very informative video is very appreciated, thank you.

Thanks David. Very informative video. Personalized settings you demonstrated also work for my Heybike Ranger and probably for many other e-bikes with similar systems. Love your reviews. U da hip hop e-bike bro.

Thank you for this. I was looking for an easy to follow run down of these settings. Nice job

Thank you man you are the first one who could explain it in a way that i can understand it. And i could succesfully change Speedlimits.

i got to the end, got a bit confused at last 2 settings so just saved everything you guided me through. i think ill be alright. at least i finally got help for all the important settings. youre a life saver. i got a migraine trying to programme it.

David you are the greatest!!!!! Just so you know this also worked for my Engwe Pro 2 .

Wow! Straightforward thanks a lot! Definitely like to go faster. Waiting for my bike to ship in June

best description ive seen yet. the manual is utterly confusing

I do love the walk mode, I live on 2nd floor condo and with back issues...it sure does HELP me out .👍🏽...!

Great job! thanks for covering all those detail settings.

Man ! What a life saver you are! Thank you thank you and thank you again!😊😊😊❤️❤️ I just got my new 2000W SIUNIU X20 48V 30AH batt for my 64th birthday. I had an 1000W Ecotric Seagull 48V 13AH BATT and the battery went dead after 5000 miles. Pay $600 for a new battery? No! I went ahead and bought a newer ebike and will tinker with my Seagull later! But the display manual that I received was in Chinese, so I have been trying to fine tune my settings with no avail ever since. You saved me a lot of aggravation!🙏❤️❤️👍

Finally found a great video on how to adjust the settings on my new Tesgo Hummer pro. Thank god it has the same controller as the one on the Friend E-bike. I would have never known until I watched your video. Thank you so much for posting this.

Tyyy so much for the tutorial on how to go to the max speed , best KZreadr on tutorials !!!

Just got mine, thank you for all the info, like many men I don't like reading instructions.

2:08-you had me cracking up laughing with the "brisk walk"! You're awesome!

Great video. It helped me change the settings I needed to. My bikes owners manual was useless. Thanks

@DavidBrandNew

2 жыл бұрын

No problem 👊🏽

Thank you, my friend, your explanation is clearly understanding, from Quebec Canada thank you

Thank you so so much David...I didn't even get a manual, I was totally lost ✨✨

Thank you so much, you are the best, i got my ep2 pro yesterday and max speed was 25 km/h i was about to contact to the sailor, thank to your video i solved everything

Brilliant video my brother, like a lot of other people, I was very confused with the actual set up if this ebike. After watching so many KZread videos of people wizzing around at speeds in access of 25Mph in this bike,, I knew there had to be something I hadn't done. I've now set up the setting exactly as you have suggested in the video and also have done a throttle test with the back wheel off the floor and the speeds I'm getting now are 50 tines better. It's raing at the moment here in the UK so I'm waiting for the roads to dry up so I can give these new setting a try. I just got my bike today so will give it a good charge then go for a spin. Thank you ever so much for taking the time to show us these settings, your time and effort is very much appreciated and I am very grateful for your assistance and help in getting my Engwe Ev2 upgraded version running at optimal level. Nuff respect my don. I will add another comment with an update of the speed difference after I take it for a spin. One love and God bless. Keep up the good work. 💯👊🏽🙏

@eMotoAZ

Жыл бұрын

Lived near Ipswich, enjoy your ride.🏁

@Cartsp70

6 ай бұрын

Don’t expect to do an emergency stop 🛑 the brakes are shit!

@Cartsp70

6 ай бұрын

If the motor is 250w and the battery is 48.V the Amps ( current flow) cannot be 25 or 20 amps how did they get to that figure without adding resistance? Doesn’t make sense

Great tutorial, still relevant just bought my bike a week ago.

Ima save this video as a go-to manual thank you!

Same as the Rattan LM750/LF750. Thanks for the video!!!!

This is the most informative video on bike settings. Thank you

@DavidBrandNew

2 жыл бұрын

Thanks!

Excellent - very comprehensive. Thank you Sir.

Very helpful - thanks Dave.

This was super helpful, Thanks much.

Thanks man...you ve been very clear..please, i d like to know how to disable the trottle that remains accelerated so far you touch the breaks

Hahaha I was asking this question and here’s the answer ,excellent vid thank you! Now bike is in. MPH Kudos 😊

Good presentation, thank you. I have checked the real speed with a gps device. The wheel size in 24 in is the closest to real speed. Cheers, Guy

My Engwe EP-2 is a very similar bike and has the same display. Using GPS on my phone to compare, I noticed the speed was way off and it was making me crazy. After changing wheel diameter in the settings per this video (I tried several diameters but ended up at 20, default was 24), it's now really close in speed and the odometer. Thanks for sharing!

@IQWhiteBear

2 жыл бұрын

How do you like that Engway? I'm thinking about getting the suped up version, the new pro w/8spds +hydraulic brakes & the bigger rear rack, or the Friend. I've read though that the 750 motor on the Engway doesn't accelerate as fast or have as much power as other 750s.

Thank u for explaining the full throttle option. I have an Lectric XP like u n when I got my Friend I set my peddle assist to 1-9 n level 1 power to 25% power. I discovered at level 1 when at a stop n going to go across a long cross walk with lots of traffic I tried using full throttle like I can on XP but but without setting it it on on Friend I found out I had no throttle power in level 1 at 25%. So now I will set my throttle to full all the time thanks again n hope this helps other Friend bike users that might have been having problem like me.

@DavidBrandNew

3 жыл бұрын

No problem Rex. Happy to help!

@yusefoliver7618

3 жыл бұрын

I have a freego ev 1,000 w electric bike I have that same monitor that your displaying my bike is on 1-5 pedal assist however it's not giving me the power it should be can you please help me or do another video on everything else that's on that monitor because you skipped a couple other things

Very helpful on my Engwe EP-2 Pro YL80C lcd settings. All of the settings and functions are the same and working. BTW, have you looked at the controller? It would be nice to see how many amps it is and if it is more than 18 amps the mfg/model. Thanks

Thank you, David. YOU ARE DA MAN!!!!

@DavidBrandNew

3 жыл бұрын

Thanks Leo

Great job! Thanks a ton!

Thx, that makes it easier to understand my new Rattan LM 750

Ha Ha that is so nice that you did this for all of us a real big thankyou!!

This really helped me bro , sub earned

Boooom thanks dude , you rock !

Deno came and dropped a banger, I be needing a reaction brooooo

Thank you this was very helpful for my bike

Thank a lot!Very helpful))!

Thanks .Helped a lot.

Thanks for the help!

Excellent!!! Thank you.

Very good ! Best regards from Germany , Berlin :-)

Hi, when you changed wheel diameter to 22 inc., speedometer showed correct speed? Did you compare it with GPS?

Thank you for the 22 inch advice, just did that. Probably will be more accurate now, compared to my GPS watch! Also mine was set 1-5, changed it to 0-5. You were an amazing help!

thank you for this beautiful explanation

@DavidBrandNew

Жыл бұрын

You are very welcome

What is the setting for electric/regenerative breaking my bike (ENGWE EP-2 PRO) with the same display does not seem to have it while there is an electric cable going out of the breaks.

Much appreciated it's the same one my rattan uses for their 750ml e-bike this was very helpful

Thanks so much for info 👍🥰🇬🇧

Very helpful I have a deepower x20 and the controls and screen look the same I'll have to check it out to confirm

Bro thank you for this video best one i seen your a g and i subscribed 💪🏽💪🏽💪🏽

For walk mode use setting 0-5 instead of 1-5 then your bike won’t jump like it did in video because u we’re in peddle assist 1 already but if it had been 0 then it will walk much slower at start

@DavidBrandNew

3 жыл бұрын

Thanks very much for clearing that up. I thought it seemed a little too fast lol

@Cartsp70

6 ай бұрын

@@DavidBrandNew power is measured in Watts not Amps , Apms is current flow so 250W ~48= 5.2 Amps , where did you get 25 Amps from?

How did you customize your Lectric XP 2.0 rear fender?? Looks cool.

I use the walk mode to go from my porch thru my entry door into the house which is spaced about the same as my front to rear wheel so I would need to push the front wheel into the house while the rear wheel is still on the last step up to the porch landing. Super helpful to alleviate that double bump.

@hknulzesnulnegen

2 жыл бұрын

Yes, I love it too!

I like this explanation, not perfect but really good. I had no idea of what all these letters meant, even after reading the manual LOL

Thank you for this information

great video helps a lot

Thanks for the Video buddy, it was immensely helpful. Gesheng has been no help at all.👍

Hi David great video could you please give me the stand over height on that bike? Thank you

Gets a like and a comment for guiding me through the menus of the Heybike Ranger as well. Heybike Ranger speed limiter goes up to 60 km/h. If thats not enough just change wheel diameter setting to a smaller number and use your cellphone for your speedometer. Thanks!

Hi David, can you tell me how I can configure the accelerator assistance (riding the e-bike) with the - button? ... because here in Italy the accelerator is illegal ... I would be grateful for this ... thank you very much

Hi grate video do you no how to turn off the cruise control i fine my bike won’t stop when brakes pulled in or when throttle is off thanks

very good video, thanks for sharing

Good video..I was able to raise my speed limit to 60..It was set at 50....However, I can’t seem to get into the personalized settings...I hit plus and minus at the same time twice but does not seem to want to go there ..

Mint video thanks 😊

Hi David Is it possible to change the start point of the motor so that it starts to run earlier. When i start riding a hill it just takes too long that the motor starts running .That is really lousy. Is it also possible to change the running time so when i am pedaling and i stop pedaling that the motor also stops immidiatly? I have also got bikes with bafang motors and there i can change everything. Is it also possible with this bike. Engwe ep2 Thanks alot My regards Uwe

Thank you for your help.

Very good. Thank you.

big help on understanding each setting.

@DavidBrandNew

2 жыл бұрын

👊🏽

David, every time I accidentally touch the throttle at a stop, the bike just kind of goes forward violently, is there a way that I can decrease the power force on the display menu? Like for example, I want the bike's throttle to start going as I pedal...

Hnd. I'm trying to change the setting so that with the throttle I can go max speed regardless of what speed setting I am (1-5), however when I change the setting to either y or n, it will only max out at what ever speed I happen to be in. I would love to get extra throttle power when needed even in the lower soeeds. Any suggestions??

It might also be worth mentioning how to access the reset to default mode. My bike seemed to come with vastly different power settings than my wife's. Returning to default settings of my bike made both bikes work the same... With both bikes working the same way, I went did a few modest customizations using your code help. I found switching to 0-7 power levels made moving around our hilly yard (off-trail) as well as traveling on the hilly roads a much nicer experience. Having more power levels with less difference in power between levels made off-trail and hilly rides easier to manage.

@NEiowaguy

Жыл бұрын

Yes how do we reset to default??

Nice Video. Helps a lot. Please, can you show me how to restore to the default settings ? I can not find the dEF option. the manual says to select the Y and press and hold the "i" button. But I can not find the Y on selections. Can You help me ?

can you let me know a linj to those side mirrors and phone holder? struggling to find ones that fit this bike. thank you

Controller max is 20 amps. Did you up yours and if so any issues

Please help bro ! I have same screen for my bike and the speedometer isn't showing any speed. Yet if I change sps it changes and works past 12. Manuel says setting is 1 but no results. What's up?

what web site you bought the mirror and phone holder? please let me know. thanks

Do you know where I can get a 12ah factory battery for the tesgo hummer s fat tire bike and thanks for the tutorial on the controller

Hi is it Anyway you can show me what is your battery charge setting is on I think someone messed with mine I would really appreciate if you can help me out with this matter thank you

Nice vid bro thanks 🙏

@DavidBrandNew

2 жыл бұрын

No problem

very good man

Hi, The lcd display on my Friend ebike was broken in an accident. Could you recommend a reolacement? It looks the same as the one on your ebike. Thanks

THANK YOU!!!!🙏❤️🙏

Hello Could you enter the voltage values ​​in the VOL computer from 1 to 5.

I see you with the Osmo Action, that’s the action cam I use. Seriously thinking bout getting this one instead of the Lectric. I’d pay the lil bit extra but I wish it came with fenders. Looks like they ship in 10-days too vs. 7-weeks 😳. It’ll be winter in this joint by then. Which one do you recommend?

@DavidBrandNew

3 жыл бұрын

Friend should be receiving a new batch this month so you’ll most likely get that faster than Lectric. If you’re willing to wait, Lectric came out with the 2.0 which is very comparable to the Friend bike. With that being said it depends what features you want. 750w vs 500w. Dual suspension vs front suspension. Mag wheels vs spoked. I covered the main differences between this and the Lectric 1.0. Check it out

did you ever find the speed limiter setting for the jasion

Hey bro, can I put off the acceleration from the menu?

Help! my peddle assist even at the lowest setting races me up from a dead stop to 10mph in just one peddle rotation?! Any thoughts? I've tried to navigate all settings to slow this ride down! lol. Hoping to still peddle a bit lol.

Like it better than your other bike? Is it worth changing to the friend? --chris

really useful.

Sometimes after breaking and coming to a full stop, the pedal assist kick in on a delay and it pushes me forward. Looks like the delay is already minimum on the default setting and there's nothing can be done about it. Correct? Thanks.

Any ideas on how to get past a code 10p when I start up my Engwe e26 bike

Hey man! How Do i close the throttle? :)

THANKS!

Is there anyway to display voltage?