Not only did he repair the horn's bell, he repaired the deepest pain in my heart from seeing it in such a horrendous state.

@weirdpringleschip

2 жыл бұрын

Yep

@T--fw6fq

2 жыл бұрын

Hello my brother.

@thomasnewton8223

2 жыл бұрын

Honestly! But in a funny way, I remember using worse ones because they would be both crumpled and lost all of their shine! Public school elementary bands don’t have a budget for polish ;)

@jackrobke7542

2 жыл бұрын

yes

@JasmineCooper_

2 жыл бұрын

666 likes

Wes that bell was a crumpled ball tin foil! Beautiful work bringing it back from the dead! Impressive Sir!

@bobboscarato1313

2 жыл бұрын

Some folks are careless with their musical instruments; maybe a school band?

@parrotmaster8787

2 жыл бұрын

@@bobboscarato1313 im still confused how it even became crumpled in the first place

@bobboscarato1313

2 жыл бұрын

@@parrotmaster8787 Probably was a demo!

@darkanddryhumour1822

2 жыл бұрын

@@bobboscarato1313 even in our highschool, my graduating class was 21 people. Most of the parents were meth heads and their children were about as careless as well and still I had never seen an instrument this bad looking

@bobboscarato1313

2 жыл бұрын

I went to private school so I didn't have any kids doing drugs etc. We didn't have a school band either. I went to music school when I was 18 y/o.

I did this job as an assistant for a summer and I can attest to how difficult it is just to get small dents out of a horn bell. This guy's a wizard. Unbelievable

@hccarder

4 күн бұрын

Its when they wrinkle that just makes you go AAAAAGGGHHHH!!!!!

As a blacksmith, I tip my hat to you, Sir! I kept waiting for the torches to come out but your skills, your tools, and your patience left me in awe!

@LifeAccordingToMatt

5 ай бұрын

I was waiting for at least an annealing but nothing came.

@McGowanForge

4 ай бұрын

Same,I wish steel was this easy while forging lol

@EpicHeroSandwich

4 ай бұрын

honestly, torches would have caused a tear. you just have to cold work brass and be patient.

@01-uy3of

4 ай бұрын

You don't need annealing for brass. Would also cause more damage.@@LifeAccordingToMatt

@abitoffblacksmithing9985

25 күн бұрын

Same here! I was also wondering how in the heck it got thata way in the first place....lol!!!!

That was amazing to watch. I would have never thought that bell could be restored.

@wesleemusicrepair9820

3 жыл бұрын

Thanks for watching

@etyrnal

2 жыл бұрын

the first most important part of the technique of any Master is the belief that anything is possible. this is why Masters accomplish and others just wish.

@chad9166

4 ай бұрын

​@@etyrnalr/imindianandthisisdeep

The way you get that metal to shift and go back to straight without a lot of heat is really amazing to watch

@2degucitas

2 жыл бұрын

Just the heat from his breath when he grunts

@aperson5551

2 жыл бұрын

I am assuming you don’t play an instrument or at lest not a brass one because it is vary easy to bend and damage

@shreddder999

2 жыл бұрын

Adding heat may stretch it to a point of no return. This can happen on auto body (metal, of course) as well. BTW, you can repair a 70s or older VW Beetle in this same way.

@toscatattertail9813

Жыл бұрын

the bell is lacquered and bent so applying heat to that combination would create a gawd awful mess.

@csidetective8440

Жыл бұрын

@@aperson5551 no he's never seen a man that intimate with a trumpet before

As a sheet metal worker, I can totally relate to what you have done. I can only imagine the face of the owner upon recovering his horn. Awesome.

@donedeal8385

4 ай бұрын

I bottom out around 20 gauge steel. Can't imagine how he does that with paper thin brass

Sir, every time I watch one of your videos I am impressed at what a master repairman you are. I never would have thought in a million years that bell could have been salvaged. I have dabbled in sheet metal for a few jobs I've had, but you are an absolute master in knowing how to make the metal move in just the right ways. If I wore a hat, it would be off to you.

That is a very fortunate customer to have you as their repair tech =)

@wesleemusicrepair9820

3 жыл бұрын

Thanks for watching.

Leather Apron, grey beard, fedora, impeccably organized shop.. you know this man is a master craftsman of a slowly disappearing art! Awesome work!

@GAIS414

2 жыл бұрын

Or a hipster! Though I'll give you he's talented!

@melakee5321

2 жыл бұрын

@@GAIS414 nah, pretty sure it was hipster people who copied this kind of clothing. It existed way before hipster clothing exists

@GAIS414

2 жыл бұрын

​@@melakee5321 Well, everything existed before hipsters, so you could say that about anything. My point being, he wears clothes from different age, it has nothing to do with his skills as a craftsman. Most craftsmen, great or bad tend to wear modern functional clothing.

@sewasewa6585

2 жыл бұрын

@@GAIS414 He is wearing the most practical and tested clothing for this and similar jobs.

@HermanMunster420

4 ай бұрын

Or maybe there is still a demand for this work because orchestras are still a thing. I love how there are hundreds if not thousands of videos of people doing this stuff and some old fart has to say no one is learning this craft. Bullshit, new young people learn this stuff everyday, you just don't see them because you're probably not looking. So stupid.

The most impressive thing to me is that if I personally received this instrument in such condition, I'd instantly cry. But not because I love music and instruments; because I know for a fact how much patience and strength it requires to get it back into shape. This man has my admiration.

My god that looks as if it were thrown out of an aircraft at 30,000 feet! Brilliant Job Wes! I love watching craftsmen at their trade. It doesn't really matter what the craft is, but it's extra satisfying when you watch someone repair something in the brass family that you may have played at sometime. From one musical instrument maker ( pipe organ here in the UK) to a musical instrument repairer par excellance salutations Sir!

Quite impressive. I have been curious about bell repair since I was in high school and a sousaphone player left his removable bell section out of his case and it was run over by our bus. At the time I thought there was no way it could have been repaired but it came back a month later.

@R2Bl3nd

2 жыл бұрын

This one sure looked like it got run over, that was my first thought

@dragonmeddler2152

2 жыл бұрын

High school band disasters! Bet that Sousaphone player had a fun bus ride back to the school...

@es330td

2 жыл бұрын

@@dragonmeddler2152 He was always one of the goofier members of a goofy section. He got plenty of ribbing for it.

@wactor7625

2 жыл бұрын

Just hearing that made my heart drop (coming from another Sousa player)

@DavidBugea

2 жыл бұрын

Thank you! Being a musician, but not an instrument player (I’m a vocalist), you saved me from having to ask how such damage could possibly occur.

I never would’ve thought that was possible - amazing restoration work!

@Zichir0

2 жыл бұрын

Yeah same. Good to know they can get repaired

I would love to hear the stories behind all of these smashed up instruments. All of them were crushed under some weight. My guess is tripped and fell on them possibly. He does unbelievable craftsmanship to bring them all back to life. Nothings impossible. Fun to watch.

@DucoSminia

Жыл бұрын

I asked the same thing. Luggage handlers at the airport?

@ivanv754

Жыл бұрын

Maybe tripped while marching?

@karencox3235

Жыл бұрын

A fall down some bleachers would do it. I slipped off the last step of the back bleacher staircase at our HS stadium when I was carrying my tenor saxophone. I held it up so it wouldn't get damaged and bruised my tailbone pretty badly, but I saved my horn!!

@nathangriffin2027

Жыл бұрын

@@ivanv754 You typically don't march with this style of French horn.

@Mr_Feyshade

Жыл бұрын

My guess would be bullies or post game "band fights".I have seen both, unfortunately. The worst I ever saw was when a bully tossed a kid's flute case into traffic. As for " band fights", after a game between rival high schools, the football teams squared off & fought, while the bands did the same. Apparently it was a tradition, regardless of which team won.

Talk about witnessing a miracle! I still can't believe what I just saw you do. Beautifully done.

This man has the patience of a saint and the skill of a master. Thank you for recording your work. It was amazing to watch.

What a random video to stumble upon... I was pretty blown away by your craftsmanship sir, that was incredible! Inspiring to see someone saving what I would have thought to be trash, but instead ready to make more music.

Awesome work sir. I have 1960s Conn double horn that's not quite that damaged, and I've been able to clean and repair most everything except the bell. You've renewed my interest in tackling that job, thank you!

That is an amazing demonstration of craftsmanship. Not many people left who can do that level of repair. Thanks for sharing this.

Not the usual sort of video I watch. But I appreciate music. Just about every kind. From classical to death metal. Punk rock, rockabilly, classic rock, 80s synthwave, drum n bass, dubstep...all of it. When I saw the thumbnail of the sad state of that horn I HAD to see it fixed. You sir are a master at what you do! Fantastic work!

@onion6667

8 ай бұрын

what about extratone

@fable1490

5 ай бұрын

I love punk and goth music and I play French horn in an orchestra lol just extreme opposites music wise

Sir, you are a master craftsman. Outstanding work on that bell flair, and one hell of a work out too. Beautiful work!

Great metal craftsman! This man is a talented individual who shows he knows how to be patient, persistent and takes pride in the workmanship as well.

Tools strength and skill, what I find surprising is the brass took that abuse with-out cracking from being work hardened. I would of thought that one would have had to apply some heat to anneal the metal. Pleasure to watch in this in instant world of gratification !

@bigfootsburneraccount9160

2 жыл бұрын

My guess is the heat would affect the finish of the brass but I'm not sure

@HaggisCat1

2 жыл бұрын

@@bigfootsburneraccount9160 On part two he has to resolder some areas and the heat does discolour it, so he uses his buffing wheel to bring it back. There also looks like there is some sort of varnish on it to keep it rom tarnishing. I'm sure that will be reapplied after he buffs the bell.

@eve_squared

2 жыл бұрын

@@HaggisCat1 probably some sort of wax, or at least I'd assume that's what they originally used, today it might be something else I'm not one for brass instruments.

@ferrumignis

2 жыл бұрын

@@eve_squared Brass instruments like this are usually lacquered to stop them tarnishing.

@socialjusticejewelry

2 жыл бұрын

@HaggisCat1 Those were my exact thoughts! I make some brass things for sale and it would be a dream if I could work them and not anneal and clean up before working again. Mr. Bell what is this magic?

I've been playing the french horn for 10 years, and watching you fix the bell soothed my soul. Great video!!

I always do appreciate the great work of these artisans... Watching the results that they get seems like magic to me. Great work 👍👍

Stumbled upon this video and loved the workmanship that was displayed. Great work.

This was amazing to watch! I didn't know that a horn that smashed could be saved.... what a display of craftsmanship! Great job!

I am thoroughly impressed with how well this kind of damage can be repaired! I would have never thought someone would or could do this! Amazing work sir. You're expertise, knowledge and dedication show!!

Absolutely beautiful results. As a flooring guy, I'm gonna try to use the mans' techniques with a commercial vinyl seam roller and several shaped stones here at home on the tailgate of my truck. What an inspiration!

@mikef.1000

Жыл бұрын

It's easy to forget that metal is malleable; what has been bent can be straightened to *almost* its original shape/ position. With patience and thinking about the work, great results can be achieved even by us amateurs :-)

I'm always a little surprised when I end up watching these sorts of videos all the way through. Really fascinating, great watch. I was shocked there wasn't some sort of small blowtorch even at a distance to help with the molding of the horn, but I guess the friction from all the work applied was all it needed, and of course the elbow grease pulling the weight there it seems. Really cool stuff. Time to go find part two!

A true artisan, the ease of how he uses those rollers tells me he knows his skill and has for a long time, absolutely fabulous ❤

Beautiful to watch! Wes has tremendous experience and skills.

That’s one of the best repairs I’ve seen before. It looked totaled in the beginning. Great work!

I just love what you do. There is nothing better than watching a craftsmen at work

All metal work!!!!! pulling, pressing tapping rolling, smoothing , like European body workers this is a lost art!!!! Fantastic work !!!!!!!

Magnificent metal work. If the French Horn musician ever does it again, he’ll/she’ll be wearing it as a head piece.

@JusticePreyHDM

Жыл бұрын

Ah yes The Brass Dunce Hat experience

I'm super impressed by the transformation. What a craftsman!

This guy has truly mastered his craft. Well done sir!!!

I'm curious how many actual hours went into straightening out the bell? Remarkable craftsmanship, Sir.

@aaaht3810

2 жыл бұрын

My question as well.

@ricardofabia

2 жыл бұрын

Mine too.

@Surgeeon

2 жыл бұрын

I used to be a panel beater, brass is soft compared to steel and easier to work with. I would have thought he would have been able to repair this in a day easy .

@davidlindsay2138

2 жыл бұрын

It's a question of 'economically repairing', i.e. cost of repair over replacement. Beautiful job, but I hope he was adequately rewarded. That's very specialist work

@Seeker85420

2 жыл бұрын

The bell would be 45 minutes to an hour. He showed several techniques, not required to use them all

In 1977 at the Texas state solo and ensemble in Austin, I was there to play Mozart horn concerto #1 that I had made a one on the same in regional. I was to meet my piano player ( John Dixon) about 20 minutes before my time slot. I was late as usually was the case. Ran to the bus,, grabbed my horn in the case, and hurried off to the warmup room I was assigned to. With about 5 minutes to go before I was scheduled to play I opened my case and the bus had run over my horn. Apparently when the instruments were unloaded my horn was in front of the rear wheels just enough for the bus to flatten and tear the bell of the horn. I knew nobody, I didn't have time even if there had been another horn. I played that horn after I had opened the bell up enough to get sound. After I finished, the judge asked if that had just happened and I said yes. He smiled and shook his head with his eyes down. I got a ...5. Yes that is as low a score as can be given. (For those who may not know its like golf lower the score the better). No mercy. It worked out okay I majored I music in college and my solo and ensemble result did not make any difference except to me. Oh well.

@pukekissing

2 жыл бұрын

I would've never recovered hahah. It's like being an artist and realizing all your paint is dry and your pencils are disheveled ... Good to hear you ended up doing well though! Now it's just a funny story lol

@mary-ruthflores4107

2 жыл бұрын

You showed your professional self so proud!! The show must go on!!! You will do well in life!!

If I had not seen this for myself I would not have thought it possible to restore this instrument. Well done !

Used to work in a repair shop in Memphis… I’ll tell you that mess ain’t easy. Fantastic job sir!!!

I never would have believed that was the same French horn in the end that we saw in the beginning. Simply amazing!

I have no idea why the almighty algorithm recommended this to me, but I'm glad it did. WOW! What the hell happened to that horn? Amazing job restoring it! Wouldn't have thought that was possible when I saw the first few seconds of the video.

Master of the English Wheel. I thought there was absolutely no way this could be done. Amazing skills, congratulations!

Amazing work, really glad I was able see how this type of repair is done. I would have thought for sure that horn was done for. True mastery!

This was a very interesting video! I played French Horn in high school. Graduated in 1974. So it's been awhile since I've played. There was an old horn that hung around the band room that had really bad damage to the bell similar to the one you fixed. You couldn't have told me that it could've been fixed until I watched this video. Great job my friend!😍

@kishascape

2 жыл бұрын

How did it even get damaged this way? Did someone faceplant while holding it or does this happen just from normal dropping or what?

@JohnH0130

2 жыл бұрын

@@kishascape Looks like one of those 'Don't ask' situations. I too played French horn in from 7th grade til I graduated, in band and orchestra. Indeed a remarkable repair job.

@lava_king1112

2 жыл бұрын

@@kishascape I imagine they must've been malled by a Bair while playing in the forest

This effin blows my mind. You sir are a master of your craft!!!

@wesleemusicrepair9820

3 жыл бұрын

Cabe Prestwood appreciate that! Thanks for watching!

Talk about being a master at your craft. Extremely impressive work.

BEAUTIFUL WORK !!! Know-how and Elbow-Grease & lots of BOTH !!! Thank you for posting! Bill, from Tn. 🇺🇸

I work in the metal fabrication industry and I have had to repair damaged parts and remove bends placed in the wrong dimensions. It always takes patience and some very inventive tools and approaches to accomplish a successful outcome. Wes, you are the next level above a talented craftsman! It was a great video and I really enjoyed watching you accept the challenge at repairing something that many would not consider possible!

@2degucitas

2 жыл бұрын

Also, knowledge of metal hardness and ductility.

I can absolutely not understand how anyone can allow his precious instrument to fall into such a pitiful state. Nice to see some people have a heart and passion and the (awesome) skills to repair even such seemingly hopeless cases. Respect!

@fivefingerfullprice3403

2 жыл бұрын

What if it was in a car accident? What if it was on a plane in the cargo hold and something heavy landed on it? What if it fell off a building?

@SH1974

2 жыл бұрын

​@@fivefingerfullprice3403 I don't know what happend to this instrument, but to me this damage doesn't look like it was one single accident that damaged a well preserved Instrument. More thinkable that this horn was tortured for a long time. If it fell off a building, it probably was an attempt to suicide.

What a privilege to watch a master craftsman at work.

The amount of hand strength! My forearms and hands were sore just watching!!

@lwkett

4 ай бұрын

For real, most people could do this for like a minute. I can only imagine a hand shake from this dude would crush you hand

@Hyratel

4 ай бұрын

I suspect the forces he's applying are very gentle to avoid creasing or work hardening the brass (which it and copper are notorious for in engineering), but the precision whe he's working it with the ball hammer, just nudging the metal around - keeping your forces under control is its own kind of tiring

"Skilled Craftsman". And then some. Superb work. I hope some young person out there somewhere takes up apprenticeship with this man. We have to nurture and appreciate folks who get things done using skills like these.

@CarloFerraro

2 жыл бұрын

I do not think he has any idea how to re-store the metal structure.

@BarryMikokinju

2 жыл бұрын

@@CarloFerraro In his defense, his last name isn't Ferraro XD

I'm a bassist and I tend to watch guitar repairs, but wow this is top notch! Had to subscribe. I'll be starting tuba soon

@TrumpetGuy26

2 жыл бұрын

Nice! I’m a student trumpeter, and I would love to learn something like the bass guitar. Good luck on the tuba!

@izzy65262

2 жыл бұрын

Hi there. I've been playing tuba for atleast 4 years now and i can definitely say that it's worth it. if you have any questions about how to get started or if you need any tips your welcome to ask :)).

@Bryce-rh2fp

2 жыл бұрын

Why hello fellow Bassist!

@jacobbeideck8246

2 жыл бұрын

Welcome fellow tuba player

@bigfootsburneraccount9160

2 жыл бұрын

Remember to breath deep and push with your diaphram

What a magician. Thanks for showing how you do this. What an art.

Amazing repairs, it is very relaxing and fascinating to watch a master craftsman work, thank you for sharing your meticulous work.

Just when I was going to comment that an English Wheel would be great for smoothing those ripples, you put it right on an English Wheel. That's the best sheet metal tool ever along with a brake.

You are a brave man repairing that horn. I would have cut the end and weld a new piece onto it just like the jewelers do when fixing a cut ring. I appraise you for your determination. Good work!

@warmicecubes2161

24 күн бұрын

How much did you decide he's worth?🤣

another video of your skill in a few minutes of video,you are a craftsman that earned your shingle

Absolutely Amazing Restoration! Fine fine work sir! You are a true craftsman / artist!

As a metalsmith I must applaud your hand strength! You literally muscled the wrinkles put of the bell.. I wouldn't have believed it possible without seeing it.

@davidjacobs8558

2 жыл бұрын

I watched Trumpet manufacturing videos, and hammered one piece bell starts out as wrinkly piece of brass sheet and end up as smooth and shiny bell shape.

@Faesharlyn

2 жыл бұрын

@@davidjacobs8558 I use a hammer and anvil pretty regularly, but not like these. Definitely specialty equipment

@ericvi3921

2 жыл бұрын

The metal is surprisingly thin any pliable. Easy to manipulate, but also.....easy to tear. Fine work

@Faesharlyn

2 жыл бұрын

@@ericvi3921 for sure, it definitely takes an experienced hand

@sceu25

2 жыл бұрын

French Horn bells are usually very thin which means it’s easy to crumple the bells and it’s also easy to roll out the bells.

Hi, I just want to thank you for taking the time to make these video's. I have only just found your channel when it popped up after watching one of Art's videos and i have been binge watching them since :) I Joined a brass band in England in 2008 as a beginner with my then 8 year old son and learned to play, I am a mechanical engineer/bodywork guy by trade and was shocked at the expense my band incurred for instrument repair and just how few repair shops there are in England. I built a very small workshop in the garden and started to learn instrument repair and twelve years later i am well established and giving back to my banding community but it's all thanks to channels like Art's and yours. I have had to improvise a lot of tools or just build them myself but i am always on the lookout for tips and advice on repair techniques and tools. Great job on that horn bell btw. Never seen a bell wire so bent as that one, makes you wonder how they get that way. Was it a school instrument? I just repaired a schools Euphonium bell that looked almost as bad as that horn.

@wesleemusicrepair9820

3 жыл бұрын

Thanks for watching. Art is a good guy, we actually went to Redwing together. Lost touch after graduation as people got their lives together and there were no cell phones/internet. I’m glad you find the videos helpful, and I’m very excited to hear that you practice the trade. We are a dying breed. I’m also pleased to read that you make a lot of your own tools as well. We often have to think outside of the box to do the best job.

Absolutely brilliant. Artistry/skill combined with very hard work. That work must be so hard of your joints, hands etc. Brilliant not just because of the skills and hard work involved, but also the ingenious shop made tools that facilitate the work. Anyone that makes some difficult task seem easy is across their brief. Wow. i would love to see how these things were made in the first place!

That is masterful work. A true artisan taking that and renewing it.

Outstanding... Brut force, but with a delicate touch! Amazing restoration! ✌️

you have an amazing skill. wow! this is literally the coolest thing ive ever seen

Tremendously skilled restoration by Wes Lee.

What I find astounding is how this was accomplished without annealing. Though, soft working the brass in this case would likely be more problematic.

@mattagnew206

2 жыл бұрын

My thoughts exactly. I've made copper model steam engine boilers and had to anneal multiple times. I would have thought the copper content of the brass would make this impossible, but he just did it right before our eyes.

@Ea-Nasir_Copper_Co

Жыл бұрын

@@mattagnew206 Do you mean, because copper is notorious for work-hardening?

@mattagnew206

Жыл бұрын

@@Ea-Nasir_Copper_Co Yup

Both of my parents studied band instrument repair. This is impressive to see.

It NEVER sucks to watch a TRUE craftsman do his deed whatever field that he/she may be in. 👍👍😎

Having seen the ‘before,’ I’m stunned you could get it to the ‘after.’ Bravo, Sir!

#1) How in the heck would a French Horn get so badly damaged? #2) Thank goodness we have people like Wes that have the patience to actually repair a beautiful horn like this.

@louf7178

2 жыл бұрын

I think it was from the marching band in Animal House.

えぇ？！この状態から入れる保険があるんですか？！ と言いたくなるほどの惨状からちゃんと修理できるんですね 驚きました Great Job!!

Master of your trade! That's the best fix I've ever seen in a long time

That’s an incredible amount of hard work and skill.

I wonder just how the bell got so beat up compared to the rest of the instrument. Amazing job restoring it

This was awesome to watch. I need to get my grandfather’s baritone repaired. The bell flare is almost as crumpled as the one in the video.😕 Awesome work, sir!!👍🏼👍🏼

@artfx9

2 жыл бұрын

How did that happen? Do you drag it behind your car on a rope everywhere you go?

This is absolutely amazing. I remember I dropped my silver cornet in the early 80's, a few dents in the bell! And my parents wanted to kill me. They brought it to a guy like this and repaired it. Was such a smooth repair you definitely couldn't tell at all.

Before I started watching, I figured he would have some kind of magical tool that would fix it straight away...but nope...old fashioned elbow grease, patience, knowledge and general metal working tools. Fantastic Job.

Respect. With the right knowledge, tools, effort and patience no problem what so ever. A very time consuming repair. Would be interesting to hear how it became so damaged.

@andrewut7ya511

2 жыл бұрын

It got rekt

@zachb2046

2 жыл бұрын

@@andrewut7ya511 ...I mean, youre not wrong

@bipedalbob

2 жыл бұрын

I'd guess that there was a monkey that got caught monkeying with another monkey's monkey.

@andrewut7ya511

2 жыл бұрын

@@bipedalbob hold up, you sayin you know a monkey that can play a horn!? This, i gotta see

@bipedalbob

2 жыл бұрын

@@andrewut7ya511 don't get me started, unless you wanna hear a story about flowers and an electronic key board. But in sure everyone has heard that story.

Отличная работа! Хотелось бы услышать, как звучит поврежденный инструмент, а потом сравнить со звуком отремонтированного) Интересно, на сколько сильна разница.

@Jacob-gj8hz

2 жыл бұрын

My thoughts exactly!

@aniquinstark4347

2 жыл бұрын

Much like hammered cymbals, a damaged bell will have a more dry sound with less resonance.

@EvgTiakaExT

2 жыл бұрын

Я думаю что звук будет выше - истонченная стенка резонатора

You are doing amazing work. Not a musician but worked with a panelbeater long time ago. Congratulations and greetings from the kingdom of Eswatini

There is no way I would have the patience to do that. Just extraordinary talent. On a side note people have told me they don't have the patience I have for my woodwork. Guess it's really not patience if it's something you love doing. Keep it up Wes.

I remember seeing a tuba far worse than that years ago at school. The bell was completely twisted and crumpled in. Was so disgusted to see how badly it was treated.

@paulandersbullecer3152

2 жыл бұрын

How did it even turn into that state?

@imactuallyonfire4114

2 жыл бұрын

Probably years of students dropping it and mistreatment here and there, schools don't typically sink money into music let alone upkeep of the instruments.

I played the horn for 10 years, but the past couple years had me practicing less and less, and now my once pride and joy sits in my apartment gathering dust. I think you've inspired me to find some time to play tomorrow.

@Siplin

Жыл бұрын

Hows that on your front?

i had a dream my trumpet looked like this and this man just fixed all my trauma from it thank you brother

Another great job keeping performing music going. Love the repairs

Wow, what a great repair job! That much damage looked intentional,

My husband was a band instrument repairman (RIP), and I saw him doing a heap of work like this: just take care of your horn or get insurance if you can't do that. A crumpled bell is never the same again. It may be cheaper than a NEW horn, or ANOTHER horn, but who wants to deal with that the rest of their days, it's all glory to the repairer than the player who didn't watch over his own horn. Our musical instruments are our "children", so don't even LET this happen by mistake - someone's mistake!

@MargaretWalkerCellist

2 жыл бұрын

A repair like this is similar to a "restored" (repaired) broken NECK on a violin, viola, cello or bass: it reduces the value of the instrument CONSIDERABLY, yes, considerably and when you sell the instrument it HAS TO BE PART of the deal to reveal this repair. No purchaser will want such a deal, unless they are dirt poor in buying a high quality instrument. Then they can insist on a reduced price no matter how long ago it was repaired.

@robertritchie2860

2 жыл бұрын

Funnily enough guitar headstock repairs, where the headstock has broken off eg on a Les Paul are stronger than the original neck joint. The value is obviously negatively affected.

@MargaretWalkerCellist

2 жыл бұрын

@@robertritchie2860 musical instruments are like people: when "broken" they can be "mended", and made "stronger", but what a pain; it is better altogether not to NEED to be repaired.

@eddvcr598

2 жыл бұрын

How would something like this happen? Do instruments get crumpled up by cars?

Wow! I thought that thing was a goner. That surely is an acquired talent. Amazing craftsmanship.

You have a potter's touch, Sir. An exceptional talent!

This French horn hasn’t been to the chiropractor in 10 years - with an active lifestyle and little rest, this chiropractor was able to adjust all its kinks until it felt brand new

Amazing work! I've seen tuba bells like that but not a horn. Patience patience patience!

Incredible work! I love watching a master at work

Mind blown! Amazing skills! I take my hat off to you sir!

As an amateur French horn player, this hurt to watch. I'm glad he restored it 😊

Its amazing to see how little some people care for intruments that can make some cool sounds, and change up a band.