updated tutorial 2024 here: • How to get Access Viru... get files from here: waldorfmusic.com/legacy-micro... futurenoize.com/dsp56300/buil... project page: dsp56300.wordpress.com/
Жүктеу.....
Пікірлер: 52
@andrewhall6038 Жыл бұрын
Thanks for the guidance. VST3 now working on FL Studio! Lots of meaty goodness ;-) Thanks to you and all of the team!
@lahcenebelbachir7929 Жыл бұрын
Thanks a lot, they didn't mention that the sound files are required as well. Now it's working.
@MexxPowers Жыл бұрын
It works after your video guide. I like the sound of the Q allot! Thanks, Sergio!
@gibareys Жыл бұрын
Thx a lot ! Amazing emulation
@nickkositsyn4597 Жыл бұрын
Thanks for sharing!
@OWL. Жыл бұрын
Thx for this guide mate ;)
@korolchukpp Жыл бұрын
Thank you very much!
@rconnelly7209Ай бұрын
I did exactly as you did except using AU plugin. Dragged all to the component AU folder. I open and I have nothing in the patch browser.
@AutPen38
9 күн бұрын
In the patch browser, where the list should be, click on "Data Sources" and browse to wherever you're keeping the mid files that contain the patches. That should mean they appear.
@von-fur-wegen-gegenolli9196Ай бұрын
Thanks! Now it's working. 😃
@vinyljunkie0727 күн бұрын
Incredible really, I am using a Micro Q hardware unit and now this too lol
@SergioFrias
27 күн бұрын
Xenia (waldorf xt)is coming next, its just amazing that we have classics such as the waldorf synths and access virus from 90s (and beyond) for the future we can expect nord lead 2x and novation nova/supernova. Adam szabo is also working on the jp8000 .what a great time.
@vinyljunkie07
27 күн бұрын
@@SergioFrias Absolutely stunning, really, amazing times indeed. This is the future I can get behind not the other bad stuff happening at the moment lol I wanted a Microwave 2 for a long time although I still would like a crusty hardware unit at some point lol The Micro Q I had since like 2002, when ever I go to sell it I end up keeping it. Nord Lead and Nova emulations would be immense, c'mon Nord Modular I miss my old one. Wonder how they will work? The Nova had quite a few DSP's as did things like the Nord Modular. The big Q also had 3 from memory. Two for voice and one for the FX, Micro Q used only one DSP for everything albeit the single DSP was more powerful than a single DSP the Q used. We also have Hermann Seib's PPG emulation running the same code as a PPG which is incredible and sounds SO good.
@ReBirthRB-3382 ай бұрын
ty a lot bro
@0bscurusSanctusАй бұрын
🙌🏼🙌🏼
@piet245 Жыл бұрын
Hi Sergio, thank you very much for the video. Would something like this also be possible for the microwave?
@SergioFrias
Жыл бұрын
Thank you Piet,the latest news was that the mw2 is on research , the team is working at the moment in the virus ti, every synth that uses the motorola 56300 is a big possibility in the near future.
@Pushklick
Жыл бұрын
@@SergioFrias the ti is finish but they will not release it because of access is still selling it.....
@SergioFrias
Жыл бұрын
@@Pushklick thank you for the info,well looks like the closest is adams sbazo viper,i do have it ,its very close to the TI indeed :)
@raysubject2 ай бұрын
tried this but noticed 2 problems - OSC2 is leaking into filter section even if in MIXER page it's volume is set to 0 - Even when filters are on "bypass" sound continues to flow through them Three is basically no way how to send all oscilaltors just to FILTER1 .. or even just OSCILATOR 1 throught FILTER 1 .. osv2 is always leaking and filter2 is always applied .. how is this possible ?? How can be there such major bug when it is original firmware from walforf site ?? It's weird
@ariahrendt61662 ай бұрын
Unfortunately there is no "Patch Browser" where you can load or choose .mid files/soundsets. In my VST3 gui it is called "Patch Manager" and doesn't have this option.
@Jbonethekid
2 ай бұрын
same and the patch browser is empty like they didnt load correct but then the vst picks up the presets if you toggle through them... you can right click on "data sources" in patch manager and then click "add file" and manually add the .mid files Vavra 1.3.9 said the update removes patch browser and switches to patch manager
@UhligSan
Ай бұрын
@@Jbonethekidthank you 🙏😃
@AutPen38
9 күн бұрын
@@Jbonethekid Thanks for this tip. After clicking on the "Data Sources" thing in the patch browser, I navigated to the mid files and now I have some presets to play at last!
@espritlibre77713 күн бұрын
Hello, I tried everything to follow the installation both in VST2 and VST3, when opening Vavra in Live Ableton, it loads its OS 2.23 ok but not its bank which is in the same folder in mid file. I would like to know who is having the same problem, because there is no option to select the file in question from Vavra, this story is driving you crazy!
@SergioFrias
13 күн бұрын
Hello,on the patch manager,right click"Data sources" and select the.mid file.tell me if it helped.
@rhinoskin7550 Жыл бұрын
Thank you for your video.. I think I am misunderstanding a step though.. Cubase doesn't pic this up as a VST, it recognizes it as FX.. Does anyone by chance know why that may be happening? Thank you. I have the files in the VST3 folder and followed the steps here.
@SergioFrias
Жыл бұрын
sure ,there is two versions for download ,the instrument and the fx , make sure you download this one "DSP56300Emu-1.2.35-win64-Vavra-VST3.zip "
@rhinoskin7550
10 ай бұрын
@@SergioFrias That was it! Thank you. Lol I had to take a break, learn some other technical things and come back to it. Thank you for the help. Have you been able to assign MIDI CC?
@TheAvalistАй бұрын
amazing !!! and this for free???
@SergioFrias
Ай бұрын
Yes it is, also the access virus, a,b,c,ti and waldorf xt is next release.
@rconnelly7209Ай бұрын
Tried the same with VST3. Still empty patch browswer.
@JonnyCrist999
22 күн бұрын
yeah me 2
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
@lightbeatz3709Ай бұрын
works but use many cpu i thing
@buzzfunkАй бұрын
your links arent working. My patch browser looks empty. I can select anything. Looks different than yours...?
@SergioFrias
Ай бұрын
Thank you, updated the links
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
@SergioFrias
21 күн бұрын
yeah you must right click on "data source" and select the external folder were you have the patches you gathered .
@JonnyCrist99922 күн бұрын
you skipped the whole install so how in the hell do i put the sound banks in do in extract them all or what bro com on
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
@JonnyCrist999
8 күн бұрын
@@Cortez77fr thank you kind sir
@vitoloperfido6 Жыл бұрын
not working on ableton 11.2.11 mac os monterey 12.5 :(
@wanderingjuniper
Жыл бұрын
crashes live and logic on big sur (vst and Au) for me
@Semiosphere
Жыл бұрын
Same here
@MultiFreddy34
Жыл бұрын
@@wanderingjuniper Did you run the terminal commands? And where did you put the firmware and sounds on your Mac?
Пікірлер: 52
Thanks for the guidance. VST3 now working on FL Studio! Lots of meaty goodness ;-) Thanks to you and all of the team!
Thanks a lot, they didn't mention that the sound files are required as well. Now it's working.
It works after your video guide. I like the sound of the Q allot! Thanks, Sergio!
Thx a lot ! Amazing emulation
Thanks for sharing!
Thx for this guide mate ;)
Thank you very much!
I did exactly as you did except using AU plugin. Dragged all to the component AU folder. I open and I have nothing in the patch browser.
@AutPen38
9 күн бұрын
In the patch browser, where the list should be, click on "Data Sources" and browse to wherever you're keeping the mid files that contain the patches. That should mean they appear.
Thanks! Now it's working. 😃
Incredible really, I am using a Micro Q hardware unit and now this too lol
@SergioFrias
27 күн бұрын
Xenia (waldorf xt)is coming next, its just amazing that we have classics such as the waldorf synths and access virus from 90s (and beyond) for the future we can expect nord lead 2x and novation nova/supernova. Adam szabo is also working on the jp8000 .what a great time.
@vinyljunkie07
27 күн бұрын
@@SergioFrias Absolutely stunning, really, amazing times indeed. This is the future I can get behind not the other bad stuff happening at the moment lol I wanted a Microwave 2 for a long time although I still would like a crusty hardware unit at some point lol The Micro Q I had since like 2002, when ever I go to sell it I end up keeping it. Nord Lead and Nova emulations would be immense, c'mon Nord Modular I miss my old one. Wonder how they will work? The Nova had quite a few DSP's as did things like the Nord Modular. The big Q also had 3 from memory. Two for voice and one for the FX, Micro Q used only one DSP for everything albeit the single DSP was more powerful than a single DSP the Q used. We also have Hermann Seib's PPG emulation running the same code as a PPG which is incredible and sounds SO good.
ty a lot bro
🙌🏼🙌🏼
Hi Sergio, thank you very much for the video. Would something like this also be possible for the microwave?
@SergioFrias
Жыл бұрын
Thank you Piet,the latest news was that the mw2 is on research , the team is working at the moment in the virus ti, every synth that uses the motorola 56300 is a big possibility in the near future.
@Pushklick
Жыл бұрын
@@SergioFrias the ti is finish but they will not release it because of access is still selling it.....
@SergioFrias
Жыл бұрын
@@Pushklick thank you for the info,well looks like the closest is adams sbazo viper,i do have it ,its very close to the TI indeed :)
tried this but noticed 2 problems - OSC2 is leaking into filter section even if in MIXER page it's volume is set to 0 - Even when filters are on "bypass" sound continues to flow through them Three is basically no way how to send all oscilaltors just to FILTER1 .. or even just OSCILATOR 1 throught FILTER 1 .. osv2 is always leaking and filter2 is always applied .. how is this possible ?? How can be there such major bug when it is original firmware from walforf site ?? It's weird
Unfortunately there is no "Patch Browser" where you can load or choose .mid files/soundsets. In my VST3 gui it is called "Patch Manager" and doesn't have this option.
@Jbonethekid
2 ай бұрын
same and the patch browser is empty like they didnt load correct but then the vst picks up the presets if you toggle through them... you can right click on "data sources" in patch manager and then click "add file" and manually add the .mid files Vavra 1.3.9 said the update removes patch browser and switches to patch manager
@UhligSan
Ай бұрын
@@Jbonethekidthank you 🙏😃
@AutPen38
9 күн бұрын
@@Jbonethekid Thanks for this tip. After clicking on the "Data Sources" thing in the patch browser, I navigated to the mid files and now I have some presets to play at last!
Hello, I tried everything to follow the installation both in VST2 and VST3, when opening Vavra in Live Ableton, it loads its OS 2.23 ok but not its bank which is in the same folder in mid file. I would like to know who is having the same problem, because there is no option to select the file in question from Vavra, this story is driving you crazy!
@SergioFrias
13 күн бұрын
Hello,on the patch manager,right click"Data sources" and select the.mid file.tell me if it helped.
Thank you for your video.. I think I am misunderstanding a step though.. Cubase doesn't pic this up as a VST, it recognizes it as FX.. Does anyone by chance know why that may be happening? Thank you. I have the files in the VST3 folder and followed the steps here.
@SergioFrias
Жыл бұрын
sure ,there is two versions for download ,the instrument and the fx , make sure you download this one "DSP56300Emu-1.2.35-win64-Vavra-VST3.zip "
@rhinoskin7550
10 ай бұрын
@@SergioFrias That was it! Thank you. Lol I had to take a break, learn some other technical things and come back to it. Thank you for the help. Have you been able to assign MIDI CC?
amazing !!! and this for free???
@SergioFrias
Ай бұрын
Yes it is, also the access virus, a,b,c,ti and waldorf xt is next release.
Tried the same with VST3. Still empty patch browswer.
@JonnyCrist999
22 күн бұрын
yeah me 2
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
works but use many cpu i thing
your links arent working. My patch browser looks empty. I can select anything. Looks different than yours...?
@SergioFrias
Ай бұрын
Thank you, updated the links
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
@SergioFrias
21 күн бұрын
yeah you must right click on "data source" and select the external folder were you have the patches you gathered .
you skipped the whole install so how in the hell do i put the sound banks in do in extract them all or what bro com on
@Cortez77fr
21 күн бұрын
Right clic on Data source in preset browser
@JonnyCrist999
8 күн бұрын
@@Cortez77fr thank you kind sir
not working on ableton 11.2.11 mac os monterey 12.5 :(
@wanderingjuniper
Жыл бұрын
crashes live and logic on big sur (vst and Au) for me
@Semiosphere
Жыл бұрын
Same here
@MultiFreddy34
Жыл бұрын
@@wanderingjuniper Did you run the terminal commands? And where did you put the firmware and sounds on your Mac?
@wanderingjuniper
Жыл бұрын
@@MultiFreddy34 sudo xattr -cr /Library/Audio/Plug-Ins/Components/Vavra.component
@wanderingjuniper
Жыл бұрын
i got it working with the firmware and a soundbank just loose in the vst3 folder, not in an extra folder as i had it
@1:00
help