I appreciate the fact that you use realistic tools and equipment. Great video and tips. Thank you!

@MuddyBeards4X4

4 жыл бұрын

Thanks🤟🏻

Looks good!

creative fab work, and it looks great too!

@MuddyBeards4X4

Жыл бұрын

Thanks

Awesome info! Thanks!!

Great video Kelly!!! I like the rapping method as well.

@MuddyBeards4X4

4 жыл бұрын

Thanks👍🏻

Great fabrication job. I really like that setup! Down the road if you can do a long term review on the harness that would be cool.

@MuddyBeards4X4

4 жыл бұрын

Thanks👊🏻

Awesome.

Lookin good man

@MuddyBeards4X4

4 жыл бұрын

Thanks👊🏻

Jobs like these make me wish I had a plasma cutter, those cuts woulda been so much easier

@MuddyBeards4X4

4 жыл бұрын

Yes they would. For sure

@MrMrsregor

4 жыл бұрын

Rick 4 years ago I bought a $300 simadre 50dp plasma cutter on eBay. Cheap, but still cuts very well and I can easily buy more consumables since it is a common style torch head. Definitely worth the $375 if u looking for an inexpensive plasma cutter

My question is what bracket do you use if your jeep wrangler doesn't have a roll bar anymore but want to add the seat belts. Also the seats are Corbeau with the open slot at the top similar to the seat you did for the racing belts

What is the rear seat you are running for your kid?

That looks amazing man👌🏻 I’ll bet it feels way safer off road with that harness than with the factory seat belt. How hard is it going to be to get in and out of the back seat? Also did you account for the jump seats/forward and decline of the seats? Love how you made everything yourself.

@MuddyBeards4X4

4 жыл бұрын

Thanks, to be honest I didn’t really think about back seat access or tilting the seats forward for rear access and yes it’s a pain, especially with the soft top on, I can’t just reach or climb through the side, lol. I guess you just have to decide if the inconvenience is worth the upgrade is safety. Thanks for watching👊🏻

@Tbmx8

4 жыл бұрын

Muddy Beards 4X4 it’s worth it in my book! I took the back seat out of my Tj years ago. More room for tools.

Love it man. One question though. I've got an LJ, and i've been thinking about putting a harness bar in the front, and doing the same pass-through you did. However, i hesitate, because my Kids ride in the back. I think getting the kids in and out would be a flat out nightmare with the harness bar in the way. I see you still have a back seat in there, how is it getting small humans in and out of the back?

@mikeestrella2

4 жыл бұрын

I'm interested in the harness bar myself and maybe one for the rear seat as well but have the same concern my 10 year old getting in and out. Also I have a hard top witch only gives you 2 entries through the hatch or lifting the passenger seat no side entrance like a soft top

@MuddyBeards4X4

4 жыл бұрын

Thanks, to be honest I didn’t really think about back seat access or tilting the seats forward for rear access and yes it’s a pain, especially with the soft top on, I can’t just reach or climb through the side, lol. I guess you just have to decide if the inconvenience is worth the upgrade in safety offroad. I do have a back seat but the kids don’t go very often, and most of the trails I do are pretty tough we’re I wouldn’t take them anyways. I am almost on the fence of making mine a 2 seater and putting my spare in the back instead. I don’t have a solution you just have to figure out and decide what will work best for your family.

@SWBCrawler

4 жыл бұрын

@@MuddyBeards4X4 that's about what I expected. :P I'm considering an angled or looped tube from the side bar on the main hoop to the upper bar. Leaving the middle open. Then the kids could crawl between the front seats. But even that doesn't sound great.

@mikeestrella2

4 жыл бұрын

@@SWBCrawler I'd like to see what you come up with cause I'm wanting to install a 4 point harness at least cause my ( scat ) after market seats have been in for the past 3 years and never set in belts

@SWBCrawler

4 жыл бұрын

@@mikeestrella2 whenever I get it done. It'll be on my channel. But right now I have no idea when that might be. I'll either get the rock hard bars. Or fabricate some up once I invest in my own bender.

Got a video of the rear seat? What seat is it? I’ve got a 3yr old and want a good kid/child seat he can grow with after the child seat

@MuddyBeards4X4

4 жыл бұрын

I don’t, maybe I will do one eventually. It’s a beard suspension seat I got for $100 at a swap meet. Just used a Jr dragster 5 point harness and bought a $7 booster seat on OfferUp I modified to run the belts through it. Works great. Also fits a full size human pretty good too, with the factory seat belt.

Good day Mr. Have you used the Apex winch enough to give me a 👍🏻👎🏻? Thx’s.

What welder are you using? Do you use it with gas? Thanks

@MuddyBeards4X4

3 жыл бұрын

Harbor freight titanium unlimited 200, and yes I use 75/25 gas and .035 Lincoln super arc wire.

@MrNirsky

3 жыл бұрын

Do you trust it to weld on the jeep, like suspension or other items ?

@MuddyBeards4X4

3 жыл бұрын

Yes, all of my suspension, long arms, axle truss, coilovers everything is welded with this welder.

Have you ever thought bout selling those parts for the lap belt? Because if you do I would by some real quick 😂

Is this street Legal ?

@MuddyBeards4X4

Жыл бұрын

You would have to check you local laws, but typically not street legal. I still have my stock belt there in case I need to drive on the street.