Forging door handles, an unusual approach
Blacksmithing allows us to try things that aren't practical using other methods. Forging channel iron into an interesting door handle and drawer pulls is just one example.
Become a Patreon member - / blackbearforge
Links for products, suppliers - solo.to/blackbearforge
#blacksmithing #forged #blacksmith
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.
Пікірлер: 131
Great ideas! The small closed handle looks like good option for kitchen rail mount. Just make two of these and put bar through them and some hooks.
A twist in the handle would be interesting
See, there you go again. I'm supposed to be working on my shop addition so that I'll have a dedicated metal working area and now I'm thinking about making some door handles for doors I don't even have yet. Thanks for the videos and keep up the good work.
The forging work gives life to the piece of steel and the filing work accentuates the beauty of the piece.
This is why I love your channel. I would never think to make handles out of that and I find it in the bin all the time.
Great idea, I can see multiple possibilities for making different types of handles and braces depending on what materials you have and what you like. Thanks for showing us some of your other designs as well as some that you wound up not caring for, might inspire someone else make something similar but alter it to his or her liking.
So glad you shared this John! I definitely need to work on seeing the possibilities in existing standard steel forms (C-channel, angel iron, etc). Thank you!
Dang, that’s some big channel. I never thought of using channel for something like that, but the extra material at the corners is perfect for handles and latches 🤔
Bravo John - great ideas - I'm thankful at least one of us has a vivid creative imagination. You've got me thinking and I've fired up the forge. Keep it up.
@BlackBearForge
2 ай бұрын
Go for it!
Great ideas, John. I knew there would be uses for my channel drops. The first chipping hammer that I made years ago was from part of an H beam drop.
It's another great video!! I usualy don't comment on KZread but I did wanna let you know that thanks to youi started forging my very first work today! Thank you for the amazing amount of lessons and encouragement!
@BlackBearForge
2 ай бұрын
That is awesome, enjoy the journey
A door knocker is what my mind came up with on the bent together one. But fantastic up cycling idea.
Maaaan, I've passed up channel in my local scrap honeypot but never again. Great idea, think that extra corner material would make a great start to leaves or other things too. Guess im heading to the scrap bins tomorrow!😂
John, WHAT A RABBIT HOLE YOU HAVE CREATED!!!!! You were right, I have conjured up several neat ideas for the scrap channel iron that I need to make for upcoming projects! Thanks for stimulating my dormant right brain. 😀👍
The shelf bracket looked awesome to my eye
Always learning with you... Thank you.. Greetings from Toledo Spain 🇪🇸🇺🇸
Beautiful handle. Love the design
@BlackBearForge
2 ай бұрын
Thank you very much!
Thank you, John! As always, INFORMATIONAL AND EDUCATIONAL! You really provide a lot of good ideas, inspiration, and guidance for those of us who need a a little help. Hope you have time today to enjoy yourself in your own shop.👍👍👍
@BlackBearForge
2 ай бұрын
My pleasure!
@4ager505
2 ай бұрын
@@BlackBearForge And ours too!
Wow, lots of possibilities here! The shelf bracket version might also look interesting with the ends flattened/drawn out like you said, then rolled up in a scroll. The small round one kept suggesting a ‘no snag’ towel hook to me as well.
I agree and thank you as well. Always good ideas and excellent common sense instruction / know-how.
Looks like some fun experimenting...Thanks John.
Kim Thomas demonstrated at our northwest Ohio blacksmithing hammer In. he used angle iron and made some very nice scrolls with it.
I just made 6 shelf supports from channel iron. Great little project. I learned a few things about some hammer control issues I was having- the sixth of six is great - the first was a bit crude… the next six will be fine. Great little learning project!
I installed the 9 foot red oak shelf with the brackets today- gold holders paste on them made for my crude work. It looks great .
@BlackBearForge
2 ай бұрын
Thats great, I'm glad you could use the idea.
Your forge idea are amazing and unique
outstanding video, thank you. channel iron is the easiest scrap to get
I made one about 2yrs. ago. I just made an over plate with chased roses on top and bottom.
I like the little "u" shape without the flares.🙂🙂
Very nice John! I have several sizes of channel iron in my scrap buckets. I've been picking around them for too long... thanks for the inspiration!
Great job as usual John!! New idea I had not considered. Thx for sharing!!
John / Black bear forge You remind me of my pop, same eyes. His fam from new york, Titus. Love your work from Aus 👍🏼🤠
Another great idea, Thanks, John!!!
@BlackBearForge
2 ай бұрын
Glad you liked it!
Awesome demonstration.
Great work as always! Great teacher as well!
Great ideas! Thanks for sharing your creativity (again)!
Great post! Good use of random scrap! I like all your ideas! Thanks for posting!!
Ribbon burner looks like it's working grand
I think the small one without the flair would look good with perpendicular straps going across the feet to hold it in place.
Thx for the idea. May come in handy.
Love the simple projects videos . I use angle iron scrap to make hooks . Got that idea from you . Thanks again for teaching us
The feet could be vine leaves and the arch of the handle could be a twisted vine.
The things we forge today will be in use long after we are gone.
Great idea thankyou John! I often use a chunk of angle for that already square corner, never thought of using channel though! I have an idea . . .
Thanks for sharing!
Good morning john, This is a good idea thanks for sharing and for the inspiration godbless and good health.
Nice design.
Thanks for sharing, instead of hook of the week, maybe handle of the week?
These are really wonderful ideas! Thank you! 😁
@BlackBearForge
2 ай бұрын
You are so welcome!
Excelente trabajo como siempre maestro !!!
Like this idea very much, got me thinking for sure.
Looks like a great tool holders
Very nice!
The smaller handle without the file work would look good, I think, with a staple over each end holding it to whatever piece you attach it to. At least that's what my mind went to when I saw it.
Thanks for another great video.
@BlackBearForge
2 ай бұрын
Thanks for watching!
Thank you for giving us inspiration! Maybe I could make a bunch of handles in the Omega shape and mark them with a big Alpha in the front?
nice ! thanks. ..Black Art Forge..
I like to grab a piece of scrape, see what I can make with it...Imagination is the key!
Nice work.
Better not let my wife see this i know ill be forging kitchen handles soon lol
Great idea 👍👍
Thanks!
@BlackBearForge
Ай бұрын
and thank you for the support
A word of advice John Buy some end mills and chuck them into your drill press to start a hole on a n angled piece of steel. Then proceed as normal. As usual your work is well achieved. Your pieces just get better with your age. Cheers
@BlackBearForge
2 ай бұрын
Great tip
Awesome 👏
Those r awesome ideas 👍👌💯💢💥
2 small ones used to attach a door knocker of some sort
Those would make good tie off eyes for utility trailer sides
that second channel the smaller one if you getting it for free would make good tool holders with the one initial bend to make it into a loop
@BlackBearForge
2 ай бұрын
Good idea
Thanks for sharing this with us John, really a great use of left over's. So many ways to use them and the excellent use for handles. Looks great. Stay safe, Fred.
@BlackBearForge
2 ай бұрын
Glad you enjoyed it
Wonderful versatile creations. The small closed handle could be used on a hook and eye latch too. Just need two and a hook. The hook could be done from the bigger channel iron?
@BlackBearForge
2 ай бұрын
Great idea!
Now I have to pick up some propane to make some handles for my new shop I'm building.
Nice
Cool music at the end
When you started flaring the ends out I thought ducks flipper. Maybe it was your statement about the feet you saw or my growing up on a farm. I don't think it would take much to turn them into a flipper.
I wonder if the closed loop could be bent to the side, and the whole piece turned 90 degrees and used as a coat hook. I like these creativity challenges, thanks!
@BlackBearForge
Ай бұрын
Give it a try, sounds like an interesting idea
I have anvil envy!!!
Wow that is an awesome anvil b
Nice project ideas. Wonder anout putting in a twist on the handle of the large one.
@BlackBearForge
2 ай бұрын
Definitely!
Hi, can you forge a roller bearing
Really nice work, very interesting to see. A random thought FWIW, not relevant to channel iron: I wonder if the offset approach to the small handle would work well starting with a straight workpiece, tapering both ends, then bending to produce a circular handle. Kind of a curlicue approach.
@BlackBearForge
2 ай бұрын
It should work, just a bit more labor intensive
you can y do handels of similer stuff like I beam haven done it but should verk
Maybe for the offset handle, try hammering in the offset on opposite sides. then bend it
@BlackBearForge
2 ай бұрын
That would be worth trying
Harware for the small shop, or for the log cabin?
@BlackBearForge
2 ай бұрын
Mostly just exploring an idea.
👍🏻
Hello from french Guyana... Please what is channel iron? I love tour vidéos, so inspiring. Thank you
@alfredomarotta6604
2 ай бұрын
Metal shaped like a [ (c)
@BlackBearForge
2 ай бұрын
It’s structural steel that is C shaped. Also called C channel or even double angle iron.
@davidfeunteun4292
2 ай бұрын
@@BlackBearForge thank you M Switzer
Brass brush!
@BlackBearForge
2 ай бұрын
Certainly worth a try
Is it just the camera angle or is that anvil about 3.5 feet long!
Since the corner wants to fight ya, maybe the induction forge would help?
@BlackBearForge
2 ай бұрын
It does help but the larger handle fit better in the gas forge
Hey John amazing video as always, very sad to hear about your Facebook page being hacked by some lowlife scammer.. hope you get your page back, I wonder if u got in contact with fb if they would help you out.. regardless if there trynna sell it back to you I think the best thing to do would be just to make a new account and we’ll support it like we did that one
@BlackBearForge
2 ай бұрын
Thanks, so far it has been impossible to actually contact Facebook directly. But I do work with a page management service that should have more pull. Only time will tell
Have you twisted any of those just out of curiosity?
@BlackBearForge
2 ай бұрын
No, but it would be worth a try
why not put a little coating of brazing in the file work?
@BlackBearForge
2 ай бұрын
Worth trying to find out what it looks like
Love your page, I follow on Facebook, you've been hacked. They changed the name to Blacksmith work but it's not remotely blacksmithing related
@BlackBearForge
2 ай бұрын
Yes I am aware. Hopefully will be able to get it back.
Did your Facebook channel get hacked? I was pretty sad to see that, hopefully the youtube channel stays good
@BlackBearForge
2 ай бұрын
Yes it did. There shouldn’t be any related risk on KZread.
👋🏻
It looks like your page on Facebook has been hacked?! It said it has changed name and only one upload.
@BlackBearForge
2 ай бұрын
It has been, hopefully I will be able to get it restored
@WeberAmazon
2 ай бұрын
@@BlackBearForge good to know that you are aware of the issue! 👍🏻 And Hello from a fan in Sweden! 😃
I think your Facebook page got hacked.
@BlackBearForge
2 ай бұрын
Yes it did. Hoping it can be restored.
Hey John, not sure if you know yet or not but your Facebook page might have been hacked!! Or a clone of your page has been made and is posting some weird stuff
@BlackBearForge
2 ай бұрын
Yes, I am aware. There is still a chance it will be restored.
@lukecope4212
2 ай бұрын
@@BlackBearForge alrighty, couldn't find a video of you addressing the issue so I figured id say something just in case! If nothing else I got my favorite youtuber to reply to my comment 😅