Forging blacksmith's tong blanks (3 heats)
Тәжірибелік нұсқаулар және стиль
Forging tongs with hydraulic press and power hammers.
Follow us on Facebook.
If you like this video, please subscribe. It will motivate me to upload more. Thank you.
• Forging blacksmith's t...
Пікірлер: 23
I enjoyed that. Good substantial tongs, so well made....got to the end and suddenly realized, I bought off this man! Very much enjoying using your tongs man, they are great ones! Have them for years now and used every week. Favourite tongs by far..thank you! Ireland sends blessings!
One of the best tong’s maker ever .
Just bought a pair. Great to see how they were made.
🍃🔥⚒Black Smith⚒🔥🍃
Красивая работа!
Excepcional!! Tiro o meu chapéu para você guerreiro... 🤔😃😃👏👏👏👏
Very nice work.
Yes, very good how to build a powerhammer like yours.
Zo‘r ekan gap yo‘q
Mantap salam satu propesi dari makassar
What size are the hammers and presses you use in this please? Do you make the dies out of mild steel or tool steel? All works beautifully together. Very impressive in overall speed.
@lowtonforge6333
2 жыл бұрын
The press is 25T, but it's the ram speed that's important. Slow pressing acts like a heat sink, cooling the steel, not moving it. The mechanical hammer is 50 kg and the air hammer is 40 kg. The press dies are mild steel, and so is the tapering die on the air hammer. Thanks for your question.
Ela harika👌👍👏👏👏
Awesome die set up! Have you tried something similar under the hammers? Might be able to reduce it to 2 heats.
@lowtonforge6333
3 жыл бұрын
Yes, I've made a few attempts under the hammer, and if I stuck with it, I could probably do it in two heats AND keep the consistency. One day, LOL.
@arceusmaster91
3 жыл бұрын
@@lowtonforge6333 I can't seem to find the video, but I saw a die setup that would help a lot. It was similar to your spinning press dies, but instead of spinning it slid across the dies using a small pneumatic cylinder to drive it. All you'd have to do is hit a foot pedal and it'd adjust automatically while being pretty secure.
@lowtonforge6333
3 жыл бұрын
@@arceusmaster91 I'd like to see that.
@arceusmaster91
3 жыл бұрын
@@lowtonforge6333 I'll try and find it again. It was a video of someone operating a large white steam/utility air hammer. I wanna say it was at Funk Forge(I believe its funk forge, he made the electro funk hammer) but I can't be 100% certain
Where you bought Hammer machine
@lowtonforge6333
2 жыл бұрын
www.angele-shop.com/shop/en/forging/machinery/airhammer-kuhn/
Y..no seria mas facil hacerlas fundidas..?
kzread.info/dash/bejne/X5ho15alf8q2h7A.html&t