Forging A San Mai Clever
Тәжірибелік нұсқаулар және стиль
Want to buy a knife from me? See what is available here in the link below!
Website - www.jpbladeworks.com/
Amazon Lists of tools I use:
(These are Amazon Affiliate Links and this channel gets a commission with no cost to you)
Starbond CA Glue Black - amzn.to/3um4wB9
Starbond CA Glue Accelerator - amzn.to/3SH37OZ
3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI
Drill Bit, Titanium, 3/8 In - amzn.to/3uTGcXm
16-Ounce Ball Pein Hammer - amzn.to/3t9dHUT
Diamond Sharpening Stone Extra Coarse (220 grit) - amzn.to/49FKC3P
Diamond Sharpening Stone Fine (600 Grit) - amzn.to/40NAhim
Diamond Sharpening Stone Extra Fine (1200 Grit) - amzn.to/49HAveY
Axe Wax (Food Safe) - amzn.to/47yXLKt
Renaissance Wax (Non-food Safe) - amzn.to/3RjPfJR
White Spray Paint - amzn.to/46yu8Id
Follow me on all my social media!!!
JP's Bladeworks Instagram- / jpsbladeworks
JP's Bladeworks Facebook- / profile.php
JP’s Bladeworks Twitter- / jpbladeworks
Jesus Perez Instagram- / jesus_perez
Пікірлер: 42
"Knife makers don't make mistakes. They make smaller knives." Finished great anyway!
Really nice looking clever. And I especially appreciate how you included where things went wrong, and how you worked around that. I'm working on a Go-Mai Nakiri right now and I hope it comes out half as nice!
Beautiful 😍 🤩 work buddy 👍
@JPsBladeworks
4 ай бұрын
Thanks bud
Dope AF results, @JPsBladeworks! This should be in a high-end kitchenware catalog and/or retailer!
@JPsBladeworks
3 ай бұрын
Thank you for the kind words
Great recovery with the crossover.
@JPsBladeworks
4 ай бұрын
Thanks! Im glad it worked out.
Nice work dude 😃😃
@JPsBladeworks
3 ай бұрын
Thanks. Glad you liked it.
Thanks for the awesome video
@JPsBladeworks
4 ай бұрын
Thanks for watching
Great job even though u had to take some off the front still looks awesome and the handle that handle even makes it look even more awesome and badass great job once again
@JPsBladeworks
4 ай бұрын
Thanks. Glad you liked it.
I am assuming that the aggressive dies moved the central high carbon steel off center. Also, that mill scale was killing me! Definitely get rid of it before final sanding!
@JPsBladeworks
3 ай бұрын
Im sure that was the issue. I need to make some less agressive ones for my press. Leaving the mill scale until the end was just a brain fart on my part. Seems like i hadnt made a brute de forge in a while 😂
Excellent work! I do have a warning about adding alcohol to epoxy. Alcohol is like very weak acetone and is used in many of the same applications. Just like Acetone softens epoxy alcohol will do the same.
@JPsBladeworks
4 ай бұрын
Ill keep that in mind. Ill probably test it out on something before i uee it on something expensive.
pretty cool! i was grinding and test etching my first sam mai today and i got a similar thing where the core was too thin and the cladding was on the edge. thankfully i got it fixed but the edge is at final thickness pre heat treat so ill see what happens after the quench.
@JPsBladeworks
3 ай бұрын
Good luck with your build. Be sure to join the viking challenge. You could get some cool prizes if you win.
@mulepowerforge
3 ай бұрын
@@JPsBladeworks thanks, this build is for the Viking challenge but I don’t expect to win any prizes. I’m really just doing it for fun.
I recently started making my core steel 1/2" - 3/4" wider than the cladding so there's less risk of what happened to you. But hey, we don't make mistakes, we make smaller knives!!!
@JPsBladeworks
3 ай бұрын
I live by that statement
Love that quench tank! What kind of mild steel did you use? Or is it just random? 🔪❤️
@JPsBladeworks
3 ай бұрын
Just random mild steel. I have a knife coming up that i will use wrought iron for. That one will be a fun one.
Sick cleaver
@JPsBladeworks
4 ай бұрын
I know. Stupid sharp.
That press is a beast.
@JPsBladeworks
4 ай бұрын
I love the new set up
Primero!
@JPsBladeworks
4 ай бұрын
Segundo!
I know people like using mild steel for SanMai but it's not worth risking all that wasted time when if you've got a press just use hardenable steel throughout.
@JPsBladeworks
3 ай бұрын
Regardless of the mild steel on the edge if it was hardenable steel i would have still cut it back just for the asthetics of the knife.
I've had this problem in the past. I was considering extending the core past the cladding material slightly to stop that cladding from rolling over the top of the core. I think that might do the trick. Shame it happened cause that cleaver was on point. Still came out nice though. Thanks for the video.
@JPsBladeworks
4 ай бұрын
I think if i had a thicker core than the cladding i could avoid the problem but its one of those things that come to mind after i mess up 😅. Your method should work as well. Thanks for watching.
@brysonalden5414
4 ай бұрын
I think thicker core steel is preferable to extending the core past the cladding; less chance of bad forge welds.@@JPsBladeworks
You dont need less aggressive drawing dies just use kiss blocks
@JPsBladeworks
3 ай бұрын
I need to make some
@andycampbell6032
3 ай бұрын
@@JPsBladeworks i just take pieces of scrap, cut em to say 1"x3" and tack weld them on the corners
Just an opinion here, but forge scale left on a knife meant for cooking is just a place for bacteria to grow.
@JPsBladeworks
3 ай бұрын
People like them because they have the hand made look. I do them because it helps better my forging skills.
@Little_River_Forge
3 ай бұрын
If it’s cleaned that’s not a problem.. wash your knives lol carbon steel isn’t fragile you can wash them 😅