Ford Focus MK2 Speedo Speedometer repair, dash strip down

Автокөліктер мен көлік құралдары

Ford Focus MK2 speedometer repair (2004 - 2008)
Normally the top and bottom pins of the socket suffer from the soldering cracking, e.g. can-bus and power pins, but best to solder all 32 pins on the socket, just add a little solder, as you don't want to short any of the pins out.
Thanks for watching www.akspeedo.com/

Пікірлер: 15

  • @daveballard9815
    @daveballard98157 ай бұрын

    Thank you for posting this video saved the day all sorts of lights lighting up on dashboard thought I had a problem with my body control module and it turned out to be a dry joint on pin 31 again thanks very much

  • @jonathanmcdowell1744
    @jonathanmcdowell17443 жыл бұрын

    Thank you for posting this video, I was able to repair my 06 Focus dash and it now starts every time 😀

  • @stilts2468
    @stilts24683 жыл бұрын

    Good video well explained thankyou

  • @akspeedo

    @akspeedo

    3 жыл бұрын

    Glad you liked it

  • @etutorsdigitalschool2215
    @etutorsdigitalschool22153 жыл бұрын

    Guys, i am having the very same problem, on my Ford Focus MK2, Red light, Engine System fouty, water in the, please help me

  • @chenarfarwq5631
    @chenarfarwq56314 жыл бұрын

    Hi mate, I have Vito 2015 so It has same problem well if I change it to myself it need soldered it.

  • @sickbeatsproductions
    @sickbeatsproductions Жыл бұрын

    its good the way we cant see exactly which parts you are soldering?

  • @panayiotistsivitanos
    @panayiotistsivitanos3 жыл бұрын

    Hello.have you got a link about this marker?

  • @abdullast3434
    @abdullast34343 жыл бұрын

    I have changed the leds and the three on the right stop working. Any advice? Thanks

  • @benjo_fett8281
    @benjo_fett82812 жыл бұрын

    Hi, I repaired mine doing exactly this and it's been perfect! Unfortunately I damaged the LCD screen.... Any idea where I can buy a replacement....? Cheers

  • @mudassar34
    @mudassar343 жыл бұрын

    Hi there I seem to have a starting issue and flashing red light. How much do you charge if we send it to you please.

  • @clustermaster8456
    @clustermaster84563 жыл бұрын

    Nice one buddy, can you give me the pinouts for this cluster? Thx :-)

  • @soptea
    @soptea4 жыл бұрын

    Good video but sometimes just soldering is not enough...

  • @akspeedo

    @akspeedo

    4 жыл бұрын

    Very true, but 8 out of 10 times, it's dry cracked solder joints

  • @stilts2468

    @stilts2468

    3 жыл бұрын

    Always 1 person has to put a downer on things

Келесі