Ford Focus (2005 - 2011) Diesel - Replace the thermostat

Автокөліктер мен көлік құралдары

Do you need to Replace the thermostat on your Ford Focus (2005 - 2011) Diesel Diesel but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Ford Focus (2005 - 2011) Diesel manual covers the diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-gb/ford/focus/2...
What's covered:
Diesel:
Ford Focus Estate 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Estate 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Estate 2.0 litre (1997 cc) (2005 - 2011)
Ford Focus Hatchback 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Hatchback 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Hatchback 2.0 litre (1997 cc) (2005 - 2011)
Ford Focus Saloon 1.6 litre (1560 cc) (2005 - 2011)
Ford Focus Saloon 1.8 litre (1753 cc) (2005 - 2011)
Ford Focus Saloon 2.0 litre (1997 cc) (2005 - 2011)
Exclusions:
Does NOT cover CVT, Powershift or automatic transmission. Does NOT cover features specific to C-Max or CC (Convertible) models.

Пікірлер: 37

  • @flydestinos9481
    @flydestinos94813 жыл бұрын

    Thanks the video is very rich in details, thnks so much

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    You are welcome

  • @l.mansouri2902
    @l.mansouri2902 Жыл бұрын

    Superbly explained

  • @HaynesManuals

    @HaynesManuals

    Жыл бұрын

    Thank you!

  • @ahmetkahraman6242
    @ahmetkahraman62422 жыл бұрын

    Thank you for the video. It helps me a lot to do this job.

  • @HaynesManuals

    @HaynesManuals

    2 жыл бұрын

    Glad it helped

  • @marac38

    @marac38

    Жыл бұрын

    Me too. Very helpful. Thank you very much.

  • @CaptainGimp
    @CaptainGimp3 жыл бұрын

    What about the 1.8 TDCI version?

  • @MadZprod23
    @MadZprod234 ай бұрын

    Great video, Is the 2012 focus similar layout to this please ?

  • @simonplechata5859
    @simonplechata58593 жыл бұрын

    Thank you 👍

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    You are welcome

  • @fordgarajankara
    @fordgarajankara2 жыл бұрын

    Thank you.

  • @HaynesManuals

    @HaynesManuals

    2 жыл бұрын

    You're welcome!

  • @dumyjobby
    @dumyjobby3 жыл бұрын

    Thank you

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    You're welcome

  • @adamschabikowski8150
    @adamschabikowski81506 ай бұрын

    Good video thenks

  • @HaynesManuals

    @HaynesManuals

    6 ай бұрын

    No problem 👍

  • @mariuscostea6957
    @mariuscostea6957 Жыл бұрын

    Frumos multumim

  • @HaynesManuals

    @HaynesManuals

    Жыл бұрын

    You're welcome!

  • @andriilazariev9211
    @andriilazariev92113 жыл бұрын

    Super!!!

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    Thanks!

  • @tk4270
    @tk42703 жыл бұрын

    Are the front bolts you refer to, nearest to the radiator?. Just to make sure.

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    Yes, all references to front, rear, left and right are from the drivers seat

  • @ivandjokic2507
    @ivandjokic25072 жыл бұрын

    Whether it is necessary to bleeding the cooling system and how to do it? Thanks

  • @HaynesManuals

    @HaynesManuals

    2 жыл бұрын

    Yes, the cooling system will require bleeding after refilling. There's a bleed point on the EGR valve at the back of the engine. Full details in our manual!

  • @tk4270
    @tk42703 жыл бұрын

    I have been looking everywhere for a video like this as i'm doing the same on my Mk6.5 Fiesta 1.6 tdci and it has the same type of thermostat housing in the exact location. I haven't started to do mine yet as i could not figure out how to take of the hose with the white band around it and the thinnest hose with circlip which you just twisted off. Now i know. I want to also flush the engine and heater matrix/core along with the radiator on my car but i don't know which hose i should direct a flow of water into, to flush the engine so to see the water coming out of the bottom hose. This the last bit for me to work out now out before i start. Any help appreciated.

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    The easiest way is to flush the engine, radiator and heater matrix separately. If you remove the thermostat housing and bottom hose from the radiator, you should be able to flush the engine, then the radiator. All you need to do then is disconnect both heater hoses at the engine compartment bulkhead and flush the matrix. Be prepared for fluid spillage!

  • @tk4270

    @tk4270

    3 жыл бұрын

    @@HaynesManuals Do i insert garden water hose into the top radiator hose after disconnecring it from the radiator to flush the engine.

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    Yes, after you've removed the thermostat housing

  • @tk4270

    @tk4270

    3 жыл бұрын

    @@HaynesManuals If i disconnect the thermostat, i dont know which hose is the top one anymore. Nearest the firewall, there are two hoses. One has a white band around it which is the hose release tab and the other has no markings or any tab or clip and is a platic push fit hose. So out of the two , which is the top hose please.

  • @jaanuskalda6841
    @jaanuskalda6841 Жыл бұрын

    so you only add new coolant in the expansion tank not in the radiator?

  • @HaynesManuals

    @HaynesManuals

    Жыл бұрын

    The video is correct for UK models - US models may be different

  • @lothusgb4311
    @lothusgb43113 жыл бұрын

    Thank you a lot for this video ! I got to find the location of the ECT on a Ford Focus 2008, and your video is on point ^_^ It's well explain :-)

  • @HaynesManuals

    @HaynesManuals

    3 жыл бұрын

    Glad it helped!

  • @marac38
    @marac38 Жыл бұрын

    How many liters of liquid go into the system? thank you

  • @HaynesManuals

    @HaynesManuals

    Жыл бұрын

    1.6L: 7.3L coolant, 1.8L: 8.1L coolant, 2.0L: 8.4L coolant

  • @marac38

    @marac38

    Жыл бұрын

    @@HaynesManuals I have a Ford Focus 1.6 TDCI, 80 kW, 109 horsepower...

Келесі