Ford Flex | HD complete Brake Job
Автокөліктер мен көлік құралдары
In this video I complete my 4th? Brake job on my beloved, rapidly aging generation one Ford Flex.
HD conversion - • Ford Flex | Hd brake u...
How to retract the rear caliper- • Ford Flex | Rear Brake...
Brake kit I used is a Power Stop K6375.
If you want the SD version of this kit- Power Stop K5510.
Rear Brake job starts @ 28.50
Torque specs
For the Front-
Carrier bolts to knuckle
SD- 111 lb-ft
HD- 122 lb-ft
Caliper slide pin bolts
SD- 53 lb-ft
HD- 55 lb-ft
For the rear same for HD/SD
Carrier bolts to the knuckle - 122 lb-ft
Slide pin bolts 24 lb-ft
#fordflex
#ohio
Gear----
Camera-Galaxy S10+
Microphone-Pixel A.
Edited by- Me
Follow me on @twitter BelkinEco
Facebook-@EcoBelkin
Пікірлер: 5
You seem to have very natural connections with yourself lol i talk to myself all the time and I like the videos I’m a new ford flex owner and I like to know how to change my own breaks and how to do other things to my cars. Great videos
There is an easier way to compress the rear caliper piston with that tool, or any tool for that matter. Remove the bracket, the rotor, put the bracket back on and mount the caliper to it, then put a block of wood behind the caliper, then use the tool. Caliper wont move, and will go much faster with no twisting of the tool. Just finished one up, and am looking for the specs, which I found, thank you very much. Powerstops BABY! Hubs OTOH are a royal PITA with those aluminum spindles. Bimetal corrosion FTW.
Hmm no comments 🤔. I think what you said about adding grease to the break pads connection makes sense. The grease would attract and hold the dirt.
Whaa, Whaa, Whaaaaaaaaaaaaaaaaaaaa!
No grease on hardware