FORD FIESTA: STOCK TO STAGE 3 350bhp+!!
Автокөліктер мен көлік құралдары
Check out the full Stage 3 Tuning Package here:
www.aetmotorsport.com/product...
Check out our full Fiesta ST MK7 Tuning Collection here:
www.aetmotorsport.com/collect...
-
-
-
This Ford Fiesta ST180 came in with nothing but an exhaust fitted. They went from stock with an exhaust all the way to stage 3 producing over 300whp and 290ftlb of torque. It was a totally transformed car.
We fitted our VUDU Ford Fiesta ST180 Stage 3 package as well as some other upgrades that aren't featured in the kit.
The full spec list:
- VT330R Turbo
- Airtec Stage 3 Intercooler
- VUDU Big Boost Pipe Kit
- VUDU Decat Downpipe
- Stage 3 Remap
- VUDU Oil Catch Can
- ITG Induction Kit
- ITG Crossover pipe + Inlet hose
Check out our other Socials to keep upto date with all new products and project cars!
Facebook: / aetmotorsport
Instagram: / aetmotorsport
-
-
-
Chapters:
0:00 Intro
0:28 What we're doing
0:57 Fitting the parts
1:33 Hardware Required
2:20 DYNO Testing
3:03 Results
-
-
-
Want to know more about what we offer? Get in touch using our contact page linked below!
www.aetmotorsport.com/pages/c...
Пікірлер: 41
Surely going to this power it needs torque mounts, big brake kit and a dif
Just a question regarding the ITG Maxogen filters for these, are they the type that need oil to function properly? and how often would they need cleaning or replacing under daily use?
Do you have a full list of the mods?
Mazza 😈
No bigger rad or oil cooler needed ? Dump valve ?
What’s the cost for stage 2 on a focus st 2013 plate
Could you get anymore then 298bhp on a x-47 turbo from your maps
Do you guys ship to the USA?
Il top ST 200 😎😎
cool
Odd question, I have just done a Turbo Swap. How do i crank the car without it starting? To Build up oil pressure.
@samcook7046
2 жыл бұрын
Remove the fuel pump relay
How much did this build cost as I’ve just purchased and ST180 about last week and would like to see how much things like this would be
@VUDUGarage
3 жыл бұрын
If your car is stock you're looking around £3000-£5000 depending on what extras you're wanting. There's a full spec list of the products we used on this car in the description if you're interested.
What's the manifold you're using on this setup? Surely it's not the stock one.
@VUDUGarage
2 жыл бұрын
This customer brought along a tubular Manifold to have fitted to the VT330R.
Does anyone with a fiesta ST increase their front tyre width? I have stage 2 and getting wheel spin sometimes. I just havent heard of anyone changing tyre size
@nolimits4690
3 жыл бұрын
Go 215/40/17
What 0-100 0-400 and 100-200does now?
@AaronMattheus
3 жыл бұрын
0-400??? Wtf are you smoking, it's not a bugatti.
@krAwly
2 жыл бұрын
It might do 0-300km but it's certainly not a 200mph+ car that's for sure.
How much to go from stock to stage 3?
@Waluk7
3 жыл бұрын
It depends who you go with but you’ll be looking at around 3-4K
@boostedchris6120
3 жыл бұрын
Usually £3k-£3.5k tbh pal
@stephenstyles4938
3 жыл бұрын
That front wheel drive
Is the engine forged ?
@ordah9372
3 жыл бұрын
I think its stock internals
@seanjamieson5623
2 жыл бұрын
It’ll be stock internals, they’ll run that no problem with proper care
Is the stage 3 software VUDU ?
@VUDUGarage
3 жыл бұрын
The software we used for this car is the Peron VT330r E-Software Upgrade. There's a link in our description to the full package we used to upgrade this car.
@bradmishra4302
3 жыл бұрын
Ok wasn’t sure as there was no mention of PERON any where. The description just said stage 3 remap 🤷♂️
LSD needed at this much power
Wheel horse power != Hub horse power
What’s the purpose of showing a Dino Tune without any Audio, the Fiesta sounds awesome with exhaust, very disappointed. The Fiesta Flash 🤙🏼🍺
No sound. Wow good video 🙄
@lappal2027
3 жыл бұрын
There is sound knobhead
@hendrik1636c
3 жыл бұрын
@@lappal2027 🤨fckface
@alexkyriacou5408
3 жыл бұрын
@@hendrik1636c potato bum poo
@hendrik1636c
3 жыл бұрын
@@alexkyriacou5408 wat
@alexkyriacou5408
3 жыл бұрын
@@hendrik1636c ly xoxoxo